John paul III
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 110
Registered: 28-4-2018
Member Is Offline
Mood: No Mood
|
|
high sensitivity low explosives
I am experimenting with homemade gunpowder cannons (small scale). I use a piece of twisted paper soaked in saturated KNO3 solution and dried to set
off the powder through a touchhole, lit with a lighter. I want to add a striker system, but I don't really want to handle and store primary HE's. Are
there OTC friendly low explosives that could be set off by impact?
[Edited on 22-10-2019 by John paul III]
[Edited on 22-10-2019 by John paul III]
|
|
Alkoholvergiftung
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 159
Registered: 12-7-2018
Member Is Offline
|
|
The first Primary was an mix of Sulfur Potassiumchlorate and characol. They used it in the pull ignigors for guns too.
|
|
wg48temp9
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 771
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
You could use the red mixture from the match heads of Swan strike anywhere matches.
When you wrap the mixture in foil and hit it with a hammer on a hard surface it makes and load bang.
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
Twospoons
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1310
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
Why not use a flintlock mechanism?
Helicopter: "helico" -> spiral, "pter" -> with wings
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3632
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
You are effectively making a firearm ... consider the legal implications.
I used to play with cannons in my youth ...
remote ignition or a light-and-run-away fuse is safer.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Vomaturge
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 285
Registered: 21-1-2018
Member Is Offline
Mood: thermodynamic
|
|
How about some toy caps off the shelf and very loud/bright. Just keep in mind the legality as sulaiman pointed out, and also that these things are pretty
sensitive-you might get some accidental initiations while pushing them into place. That or go electric.
|
|
Praxichys
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Indeed. Where I live, "The term “Firearm” means: Any weapon (including a starter gun) which will or is designed to or may readily be converted to
expel a projectile by the action of an explosive" (ATF website, USA)
While I doubt police anywhere would prosecute this to the fullest extent unless someone was hurt/property was damaged, it is worth knowing that
manufacturing and discharging a firearm might have severe legal consequences in your area.
Here in the USA it is perfectly legal to make your own and use them on your property as long as you're not in a state/township/city that specifically
prohibits this, which is basically everywhere except the East or West coast.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
And there are good reasons why it is no longer used.
|
|
Alkoholvergiftung
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 159
Registered: 12-7-2018
Member Is Offline
|
|
It was saver than mercuryfulminate and glasspowder. What i read they mixed it wet and than they filled the paste in the Primary caps and sealt it
with turpentine or linseed oil. Dosent Sound to dangerous for me.
|
|
Pyro_cat
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 243
Registered: 30-4-2018
Member Is Offline
Mood: No Mood
|
|
Go check out the cannons and supplies at dixiegunworks.com nice ones for about $1000 and the big 250 and 300lb ones are about 2000 with shipping.
All kinds of parts and plans and stuff too.
|
|
Pyro_cat
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 243
Registered: 30-4-2018
Member Is Offline
Mood: No Mood
|
|
I recently blew off some plastic caps from the dollar store and they had the exact same smell as the ones from 40 years ago. Strange how memory never
ever forgets a smell.
And watch out with homemade cannons. Made one from a log splitter by simply drilling a fuse hole in the steel tube handle by the base. It tolerated
dozens of shots with first one then 2 film canisters full of pyrodex with Al foil as wadding. Its last shot it ruptured 1/3 of the way up. They say
metal fatigue is a weakening of metal due to stress, resulting in an accumulation of small cracks. I guess that's what happened.
I say always have something solid between people and things that go boom. We were intentionally pushing it and had it behind a tree stump with a big
log on top.
[Edited on 24-10-2019 by Pyro_cat]
|
|
markx
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 645
Registered: 7-8-2003
Location: Northern kingdom
Member Is Offline
Mood: Very Jolly
|
|
Quote: Originally posted by John paul III ![](images/xpblue/lastpost.gif) | I am experimenting with homemade gunpowder cannons (small scale). I use a piece of twisted paper soaked in saturated KNO3 solution and dried to set
off the powder through a touchhole, lit with a lighter. I want to add a striker system, but I don't really want to handle and store primary HE's. Are
there OTC friendly low explosives that could be set off by impact?
[Edited on 22-10-2019 by John paul III]
[Edited on 22-10-2019 by John paul III] |
The mixture from safety match heads is probably your best bet regarding OTC materials that would suit the purpose. A custom mix of KClO3 C S also
works very well, but keep in mind the sensitivity. I would suggest to purify the sulfur by recristallisation from xylene or toluene to remove the
residual acidic content. It does stabilise the mix against degradation due to acidic breakdown of chlorate, but it still remains very sensitive
towards friction and impact. You need very small amounts of the mix for a striker system, so do not go about mixing a jar full of it and storing on
your shelf.
Long time ago I played around with striker systems for flare launchers and operated them with the chlorate mix. Worked flawless and reliably when
handled carefully. But it sure does work wonders provoking corrosion on equipment. The residue from the ignited mix is acidic and chloride bearing, so
be prepared for heavy rusting of the striker setup...or use stainless parts. I also noted that when a small amount of aluminium powder was present in
the chlorate mix, it became inert in the striker setup. No reasonable amount of strike force would cause it to ignite.
Exact science is a figment of imagination.......
|
|
wg48temp9
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 771
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
Quote: Originally posted by markx ![](images/xpblue/lastpost.gif) |
The mixture from safety match heads is probably your best bet regarding OTC materials that would suit the purpose. |
The mixture from the heads if safety matches in my experience do not ignite when compressed with a hammer blow.
Strike anywhere matches (Swan brand with a sand paper striking surface) are more sensitive.
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
Pyro_cat
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 243
Registered: 30-4-2018
Member Is Offline
Mood: No Mood
|
|
I just took the flint from a lighter put it on the flat part of the vice and it sparked pretty well with a hammer hit. Never used one of those fire
starter flints in the camping section of stores but maybe that could be engineered into an ignition system. Or that flint sparker thing for lighting
torches.
|
|
Pyro_cat
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 243
Registered: 30-4-2018
Member Is Offline
Mood: No Mood
|
|
Off topic but its on my pyro bucket list, never got a fire going rubbing two sticks together, my one real attempt I got smoke after the dry wood
glazed from the friction and it started squeaking. I did just break my lighter.
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Quote: Originally posted by Pyro_cat ![](images/xpblue/lastpost.gif) | Off topic but its on my pyro bucket list, never got a fire going rubbing two sticks together, my one real attempt I got smoke after the dry wood
glazed from the friction and it started squeaking. I did just break my lighter. |
I've had success with a bow drill (and very dry cedar wood) but never just by rubbing 2 sticks.
|
|
Katie
Harmless
Posts: 35
Registered: 12-11-2019
Member Is Offline
|
|
Commercial primers
You can buy commercial primers for ammunition. Google “reloading supplies”. I recommend you get the large rifle magnum size (or maybe shotgun
primers would be more powerful?) They are relatively cheap, safe, legal, and literally built to be fired by a firing pin.
They also make primers for black powder firearms, which might work best and are a lot larger.
|
|