lordmagnus
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 92
Registered: 10-1-2006
Location: Webster, TX
Member Is Offline
Mood: No longer annoyed ( I found a new girlfriend)
|
|
Test results of my new equip.
Well I just recieved my equip. yesterday that I ordered;
Snyder Column (250 mm)
Hemple column (28mm x 200mm)
Graham Condenser (200mm)
1500 watt light dimmer unit (for controlling hotplate)
I setup my rig, with some cheap VODKA (I mean tis is awfull stuff), anyway, I have a SS pot with water in it, and a 1000ml flask with a thermometer
port, attached the Snyder column, and the distilling arm witha thermo port, and the graham condenser. I have teh condeser being fed with a sub. pump
and 5 gallon bucket of water with a bag of ice in it, and teh water bath is being powered by a 1100watt hotplate (walmart special) running on high,
but attached to a 1500watt light dimmer. At about 35-40% of max onthe dimmer, I have an excellent response, the Vodka temp is running about 85 Deg. C,
and the distill head temp is running 77.5 or so, initally I had the temp to high, and the head was running at 82 deg. c. the product out of the
condenser was oily and awfull (fusel oil, etc.), I have since put that in a seperate container, and have the temp where I want, I am now getting a
very clean drip, and excellent flow rate for the size of my rig. I highly recommend the SNYDER COLUMN
I\'ll kill a man in a fair fight, or if I think he is gonna start a fair fight, or if he\'s bothrn me allot, or if I am getin payed good, or probably
over a good woman.
-Jayne Cobb (Serenity)
|
|
MadHatter
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1333
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Distillation rig
Sounds like your getting what you want ! That's great ! I'll stick with my old-fashioned still for
my hooch. Do you intend to make that ethanol anhydrous ? If so, I recommend the use of rock
salt.
BTW, if the temperature starts to rise in the distilling head after some time, above 78 C that
is, it's likely that most of the ethanol has come over, and you should stop the distillation if that's
what you're after. Those fusils are YUCK !
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
lordmagnus
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 92
Registered: 10-1-2006
Location: Webster, TX
Member Is Offline
Mood: No longer annoyed ( I found a new girlfriend)
|
|
Yeah, I decided to run a straight distillation with my take off head, and a liebig condnesor, just controlled the temp with the dimmer, to seperate
the majority of the alcohals, from the water. Then I went back with the snyder collumn, and ran it, had excellent seperation.
I\'ll kill a man in a fair fight, or if I think he is gonna start a fair fight, or if he\'s bothrn me allot, or if I am getin payed good, or probably
over a good woman.
-Jayne Cobb (Serenity)
|
|
|