Housane
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 127
Registered: 3-9-2018
Location: Worcester, England
Member Is Offline
Mood: Let’s make
|
|
Determning purity of OTC sodium hydroxide
Hi
I have some OTC sodium hydrooxide form essential power and was wondering how to work out its purity as i hve no chemicals of known purity as mine are
all synthsised by me or OTC. Any help greatly receved, BTW i did check the msds but they are too vauge. I hve much glassware and enough to do a
titration if it would help.
EDIT: It is in solid form in smal 1mm diameter pellets
Thanks
Housane
[Edited on 4-5-2019 by Housane]
Green QD's so far
Feel free to correct grammar or incorect knknowledge. We are all learning.
|
|
RedDwarf
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 166
Registered: 16-2-2019
Location: UK (North West)
Member Is Offline
Mood: Variable
|
|
Without any reagents of known strength a titration won't be of any use to you (you need to know what you're measuring against!)
You also need to think what you are really trying to find out - the "strength" of your NaOH or the presence/level of a specific impurity?
In the case of NaOH all is probably not lost as it's a commodity chemical with relatively few manufacturers and a form that doesn't easily lead to
adulteration - ie the specification of your NaOH is likely to be the same as similar quality products. It's no use comparing against analytical NaOH
specs as that's obviously not what you bought, but a technical grade NaOH will have similar specs. This is one from a german supplier (I had their
site open so apologies for it not being an english spec):
Gehalt mind. 99,30%
Natiumcarbonat (Na2CO3) max. 0,6%
Natriumchlorid (NaCl) max. 0,01%
Natriumsulfat (Na2So4) max. 0,005%
Eisen (Fe) max. 0,004%
Quecksilber (Hg) max. 0,0001%
So your major impurities are Sodium Carbonate, Sodium Chloride and Sodium Sulfate ( as you'd expect from the manufacturing process). There might also
be some water as it's hydroscopic. Most adverts I see for NaOH online state 99% pure so I'm pretty sure your product will be close to the above.
|
|
DavidJR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
I would expect at least 10% water.
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Here you can get all sorts of NaOH grades. The cheapest one is ~70% NaOH and ~30% NaCl, while the one I use the most turned out to be ~98% after
titration with oxalic acid (using phenolphthalein indicator).
|
|
kulep
Harmless
Posts: 46
Registered: 19-5-2018
Location: Somewhere below the tropic of Capricorn
Member Is Offline
Mood: Spicy
|
|
I have some that I think is almost entirely carbonate as it came in a bag and had a lot of water
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
You can use sodium bicarbonate as a reference material. The stuff they use in cooking is of very high purity.
If you bake it in the oven at about 200C it loses water and CO" and becomes very high purity sodium carbonate.
With that you can check the concentration of some acid- pipe descaling or patio cleaning solutions are generally acids of some sort.
And that gives you an acid with a known molarity.
Then, using that, you can determine the purity of the NaOH.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7998
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Are you sure the baking stuff for the kitching is very pure NaHCO3? I have the impression that it is quite impure. A solution of the stuff I can buy
in the supermarket remains cloudy, even at low concentration. I have the impression that maybe 30% or so is other material than NaHCO3. A fairly large
part of this is insoluble matter.
Recently, I purchased sodium bicarbonate, sold to me as a chemical of 99+ % purity. Solutions of this are totally clear.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Do you know that baking powder is not the same as bicarbonate of soda?
Food grade NaHCO3 usually meets the spec for pharmaceutical grade. (Labeled BP, USP or P Eur, as appropriate)
That means an assay value (by titration) of 99 to 100.5%
[Edited on 6-5-19 by unionised]
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
It also depends on where you buy it from. Solutions of my supermarket NaHCO3 marketed as baking powder aren't fully clear, but the sodium bicarbonate
I bought from a en-gros hypermarket in a 1kg bag as simply "food grade sodium bicarbonate" makes completely clear solutions and thus seems purer.
This seems to coincide with what unionised said.
|
|
Housane
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 127
Registered: 3-9-2018
Location: Worcester, England
Member Is Offline
Mood: Let’s make
|
|
Quote: Originally posted by RedDwarf ![](images/xpblue/lastpost.gif) | Most adverts I see for NaOH online state 99% pure so I'm pretty sure your product will be close to the above.
|
Ok thanks i will assume it is 99% pure and use it to titrate my other acids and bases
Green QD's so far
Feel free to correct grammar or incorect knknowledge. We are all learning.
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
My NaOH comes as draincleaner for five euro per kilo and it stated on the bottle it is 99%, which I don't doubt.
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Also note that "baking powder" and "baking soda" are two very different things. Something my girlfriend discovered when she tried making pancakes
using the wrong one.
|
|