Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Birkeland Eyde apparatus synthesized an unknown compound.
uraniumtungstenuranium
Harmless
*




Posts: 3
Registered: 24-3-2019
Member Is Offline


[*] posted on 24-3-2019 at 12:42
Birkeland Eyde apparatus synthesized an unknown compound.


warning: this is my first post

ok, so i constructed a Birkeland Eyde apparatus and everything has been working normally, I'm using a small NST but what can you do the bigger ones are very difficult to find. Anyways, as I run my apparatus for extended periods of time, a white substance appears to deposit on the wall of the glass chamber in which the electric arc resides. The longer I run it the more deposit forms. I would like to try and figure out exactly what this compound is. My apparatus is designed in such a way that the only elements this compound could be formed from are Nitrogen, Oxygen, Hydrogen, Chromium, Iron. I'm fairly sure that it couldn't be the chromium and and iron from the stainless steal electrodes as I have previously tried this with copper electrodes and the same deposit formed. I don't believe that CO2 in the air could have contributed to the making of the compound but there could be that was well.

If any of you have experienced this before or have any theories as to what this compound could be please let me know.

Thank you.

[Edited on 24-3-2019 by uraniumtungstenuranium]
View user's profile View All Posts By User
Vomaturge
Hazard to Others
***




Posts: 286
Registered: 21-1-2018
Member Is Offline

Mood: thermodynamic

[*] posted on 24-3-2019 at 13:17


Welcome to Sciencemadness!

I've seen alumina insulators(in a high power worklight with a bad terminal) and possibly really hot glass depositing white coatings on stuff-is it possible glass or ceramic are in/near the arc?

Also tungsten. Power up a light bulb with a cracked glass envelope and there's a powdery white coating and smoke. Unlikely here, unless the electrodes were actually tungsten (e.g. for TIG welding)
View user's profile View All Posts By User
phlogiston
International Hazard
*****




Posts: 1378
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline

Mood: pyrophoric

[*] posted on 24-3-2019 at 13:38


Is it soluble in water?



-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
View user's profile View All Posts By User
uraniumtungstenuranium
Harmless
*




Posts: 3
Registered: 24-3-2019
Member Is Offline


[*] posted on 24-3-2019 at 13:41


i am not sure of solubility, i will get back to you once i have collected enough of the residue. My electrodes are stainless steel not tungsten, however i probably should be using tungsten. Also there is no glass or ceramics near the arc.

[Edited on 24-3-2019 by uraniumtungstenuranium]
View user's profile View All Posts By User
hissingnoise
International Hazard
*****




Posts: 3940
Registered: 26-12-2002
Member Is Offline

Mood: Pulverulescent!

[*] posted on 25-3-2019 at 02:37


Quote:
If any of you have experienced this before or have any theories as to what this compound could be please let me know.

I used Al electrodes to prepare NO2 for nitric acid synth ─ under confined jacob's ladder conditions, aluminium electrodes don't overheat or react with formed NO2 or O3.

Your mystery compound is obviously some reaction product from the electrodes...though one would not expect Cr or Ni compounds to be white?

View user's profile View All Posts By User
Herr Haber
International Hazard
*****




Posts: 1236
Registered: 29-1-2016
Member Is Offline

Mood: No Mood

[*] posted on 25-3-2019 at 04:30


Interesting coincidence: you posted this the same week Norsk Hydro was hacked !
https://www.bloomberg.com/news/articles/2019-03-19/hydro-say...


Oh well, Byrkeland-Eyde is sooo pre-1908 :cool:
View user's profile View All Posts By User
Felab
Hazard to Self
**




Posts: 76
Registered: 9-11-2018
Member Is Offline

Mood: :dooM

[*] posted on 25-3-2019 at 07:00


Are you sure that your electrodes exclusively contain iron and chromium?
Some types of stainless steel contain nickel, copper, molibdenum or niobium. Where did you get them from?

Also, use a microwave oven transformer and 2% thoriated tungsten electrodes. The MOT provides much more current than the NST, but at a much lower voltage so you need the thoriated tungsten rods to start the arc easily. If you manage to get an MOT, be carefull with it as it can very easily kill you.
View user's profile View All Posts By User
uraniumtungstenuranium
Harmless
*




Posts: 3
Registered: 24-3-2019
Member Is Offline


[*] posted on 25-3-2019 at 13:01


I was thinking of using an MOT but apparently something something resonance and I would need two capacitors for current regulation and good arcs.
View user's profile View All Posts By User
Felab
Hazard to Self
**




Posts: 76
Registered: 9-11-2018
Member Is Offline

Mood: :dooM

[*] posted on 31-3-2019 at 08:16


Quote: Originally posted by uraniumtungstenuranium  
I was thinking of using an MOT but apparently something something resonance and I would need two capacitors for current regulation and good arcs.


When I made my Byrkeland-Eyde reactor I didn't use a resonant MOT.

If you want the arc to be larger and easier to strike use two MOTs with their primaries conected in parallel and their secondaries in series. Although a singel MOT works just fine if you strike the arc by hand.

I found out that resonant MOTs tend to heat up a lot, are noisy and they are not much more eficient than just plain MOTs without capacitors attached to them.

Also if you want to improve the eficienty of your reactor, put a magnet below the arc. This will make it cover a larger volume of gas, and therefore make it more eficient.

[Edited on 31-3-2019 by Felab]
View user's profile View All Posts By User
Metacelsus
International Hazard
*****




Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline

Mood: Double, double, toil and trouble

[*] posted on 8-4-2019 at 11:33


N2O5 is a white solid. It possibly could be that (although the air would have to be quite dry).



As below, so above.

My blog: https://denovo.substack.com
View user's profile View All Posts By User
hissingnoise
International Hazard
*****




Posts: 3940
Registered: 26-12-2002
Member Is Offline

Mood: Pulverulescent!

[*] posted on 9-4-2019 at 07:40


Quote:
N2O5 is a white solid. It possibly could be that (although the air would have to be quite dry).

Though the requirements for N2O5 are certainly there, the compound is so unstable and moisture-sensitive that its formation is highly unlikely...

View user's profile View All Posts By User

  Go To Top