| Pages:
1
2 |
NERV
Hazard to Others
Posts: 152
Registered: 22-9-2002
Location: USA
Member Is Offline
Mood: Fluorinated
|
|
SECURE YOUR GAS MASK!!
I read a topic at rogue science a few days ago on how bubbling Cl through a NaOH H2O2 solution created free oxygen radicals that emitted a red glow. I
had set up an addition funnel to add HCL to bleach in a 2-neck flask. A tube led from the other neck to a 200ml RB flask filled with a NaOH H2O2
mixture. Well being a dumb ass I didn't secure my gas mask up all the way. When I added the first few drops of HCl everything went well so I sped
it up. Then all of a sudden I felt a horrible pain as I got a lung full of Cl gas. I spent the next half-hour coughing my lungs out. My chest still
aches even though it has been a 3 hours since I inhaled it. So the morale of the story is… SECURE YOUR DAMN GAS MASK!
[Edited on 22-9-2002 by NERV]
Vir sapit qui pauca loquitur.
|
|
|
I am a fish
undersea enforcer
Posts: 600
Registered: 16-1-2003
Location: Bath, United Kingdom
Member Is Offline
Mood: Ichthyoidal
|
|
Go to a doctor immediately. Chlorine poisoning can have nasty secondary effects such as fluid accumulation in the lungs and bacterial superinfection.
1f `/0u (4|\\| |234d 7|-|15, `/0u |234||`/ |\\|33d 70 937 0u7 /\\/\\0|23.
|
|
|
Haggis
Hazard to Others
Posts: 238
Registered: 1-12-2002
Location: Mid-America.
Member Is Offline
Mood: Lacrymating
|
|
"Pulmonary Edema" The way it kills you is 'dryland drowning'. This is where the alveoli fill with fluid and you cannot secure
oxygen. I reccommend that you see a health professional about this. What type of mask did you use? Why wasn't it tightened?
|
|
|
DDTea
National Hazard
Posts: 940
Registered: 25-2-2003
Location: Freedomland
Member Is Offline
Mood: Degenerate
|
|
Hmm, I have never had such a bad exposure to Chlorine! Geeze, I've never understood how people have hurt themselves this badly with it. I've
made it countless times, I use it to test my gas-mask preparedness, and I have even sometimes inhaled it intentionally as a reminder of why I want to
avoid it  .
Now, I have a few basic rules to keep in mind when putting on a gas mask...
1- Never use a filter that has experienced more than 8 hours of exposure!
2- This is especially the case for the Canadian Gas Masks: ensure the voice emitter is tightly secured, otherwise it may leak!
3- Do not put on a pre-tightened gas mask (well, a LITTLE pre-tightened, but not all the way). First of all, trying to force it on could cause a strap
to pop off, creating a terrible situation to be in if there is a dangerous chemical about. Second, it may loosen a strap as you put it on, creating an
insecure seal.
4- Instead, put on a semi-tightened gas mask, and then tighten ALL straps as much as possible.
5- Hold your breath before you put your gas mask on. When it is on your face, exhale completely. This is to purge any "bad" air in your
mask.
6- To test the security of your seal, put your hand over your filter, and hold your breath. Your mask should stick to your face for several seconds.
7- When your mask is not in use, always keep the filter covered. Your filter should have come with a rubber sealer that you can press into your
filter's hole. Also, it should have a screw-on cover.
8- Buy a Chemical Hood! These work very well, and serve as a reinforcement of existing chemical protection. Not only do they cover the back of your
head an neck, but also ensure that all potential leaks on your mask are SEALED.
The mask I currently use is a Canadian C5 (I believe some people also call it an "M-69". So far, I have had no problems with it when it comes to protection from Chlorine, Ammonia, Hydrogen Chloride, and
Pulverized NaOH.
|
|
|
NERV
Hazard to Others
Posts: 152
Registered: 22-9-2002
Location: USA
Member Is Offline
Mood: Fluorinated
|
|
The gas mask is a norton brand, with organic vapor, and acid gas fillter cartrages. The mask was unintentionaly unsecure I had tightend it, but when I
got that wiff of Cl I realised that it had slipped down a bit. I will go get a check up at the doctors as soon as I can.
Vir sapit qui pauca loquitur.
|
|
|
Haggis
Hazard to Others
Posts: 238
Registered: 1-12-2002
Location: Mid-America.
Member Is Offline
Mood: Lacrymating
|
|
What exactly are you going to say to the doctor? The best excuse possible for this would to say that you accidentally mixed two cleaning chemicals in
the bathroom. He will brush the chlorine poisoning as an accident, thus freeing you from questions. I suggest getting as much fresh, clean air as
possible. Try out your lungs in the morning, if they are better, good. If they still hurt bad, you better make a visit.
|
|
|
I am a fish
undersea enforcer
Posts: 600
Registered: 16-1-2003
Location: Bath, United Kingdom
Member Is Offline
Mood: Ichthyoidal
|
|
| Quote: | | The best excuse possible for this would to say that you accidentally mixed two cleaning chemicals in the bathroom. |
That's a good idea. Say that the two chemicals 'involved' were bleach and some kind of limescale remover (which would release
chlorine), rather than bleach and an ammonia based product (which would release chloramines).
1f `/0u (4|\\| |234d 7|-|15, `/0u |234||`/ |\\|33d 70 937 0u7 /\\/\\0|23.
|
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
where the hell do you get a gas mask from? I live in Toronto I really want one. Any help with this? Also, how much is a gas mask regularly?
EDIT: I have found two military surlplus stores. In case anyone here is from or around toronto, I'll give you the name of the stores and some
other information.
M & M Sporting Goods & Military Surplus
1802 Eglinton W
York, ON M6E2H6
Phone: (416) 787-1460
_________________________________
Save-More Surplus Store Ltd.
114 Queen St. E.
Toronto, ON M5C 1S6
Mon-Wed 9:00am-6:00pm
Thu-Fri 9:00am-8:00pm
Sat 9:00am-5:45pm
Sun CLOSED
Tel: (416) 368-3536
Fax: (416) 368-6384
[Edited on 27-4-2003 by DeusExMachina]
|
|
|
DDTea
National Hazard
Posts: 940
Registered: 25-2-2003
Location: Freedomland
Member Is Offline
Mood: Degenerate
|
|
I bought my mask off eBay for $15  . Now, I'm not saying my mask is 100%
safe, and is probably a good 5-10 years old...but so far, so good...
When buying gas masks, first and foremost make sure it fits! When you put it on, cover the breathing hole and hold your breath. The mask must stick
to your face for 10 seconds to ensure a good seal...if it does not, then there are leaks. Either tighten it more, or find a better size.
Also, do not buy any Russian masks! I have heard very bad things about them!
Also, be wary of the German masks too. If I were you, I would look for the latest American masks...there is one American mask, however, that has a
dangerous flaw. I think it was the M-17, and it was in service during the Gulf War. Look for the latest American masks, the M40 series; they are
excellent! I have also found the Canadian masks to be very good.
Make sure that the filter you buy is NEW. It should also be sealed, in a can or plastic bag. Check the date too; you don't want anything from
before about 1995...filters are only made to last, I think, 8-10 years. But in general, newer is better! The standard filter for Western masks is 40mm
NATO standard. If possible, buy more than 1 filter. You should not expose to your filter to more than 8 hours of cumulative exposure.
And also, if they are selling them, buy a chemical hood. They are extremely beneficial in securing your gas mask!
|
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
what's a chemical hood and are israeli gas masks good? one of the stores that I listed said that they are selling new israeli gas masks.
|
|
|
DDTea
National Hazard
Posts: 940
Registered: 25-2-2003
Location: Freedomland
Member Is Offline
Mood: Degenerate
|
|
It depends on which Israeli mask you are looking for. They will both protect you from poison gas, but the civilian model's lenses tend to fog
up...that is the major complaint I've heard about them.
The new military model, however, looks very good! I'm not sure if they've taken care of the fogging problem or not, but it has a voice
emitter and a drinking tube. It also uses the 40mm NATO filter, which is very easy to find.
Chemical hoods are just that- Hoods that you wear over your mask. They are designed to cover your neck and shoulder area.
EDIT: be wary of the Israeli masks, however. They have a tendency to give the defective ones to foreigners... In fact, there was a big story a few
months ago about Israelis giving used and defective masks to foreigners in Israel.
[Edited on 4-27-03 by Samosa]
|
|
|
madscientist
National Hazard
Posts: 962
Registered: 19-5-2002
Location: American Midwest
Member Is Offline
Mood: pyrophoric
|
|
As for pulmonary edema: you know you have it if you have trouble breathing when lying down, but don't have trouble breathing when standing up.
I weep at the sight of flaming acetic anhydride.
|
|
|
NERV
Hazard to Others
Posts: 152
Registered: 22-9-2002
Location: USA
Member Is Offline
Mood: Fluorinated
|
|
Well it seems I am fine. I havent been able to see a doctor yet, but my lungs no longer hurt, and I havent had any breathing trouble at all. If
nothing shows up by tommarow then I geuss it would be safe to assume that I am not going to die.
Vir sapit qui pauca loquitur.
|
|
|
madscientist
National Hazard
Posts: 962
Registered: 19-5-2002
Location: American Midwest
Member Is Offline
Mood: pyrophoric
|
|
Glad to hear you're okay so far
Here's a good page with information on pulmonary edema. Check it out. http://www.nlm.nih.gov/medlineplus/ency/article/000140.htm
I weep at the sight of flaming acetic anhydride.
|
|
|
foomhood
Harmless
Posts: 10
Registered: 13-4-2003
Location: cyclohexane for lunch
Member Is Offline
Mood: No Mood
|
|
What will you do when you go over a burning hill
or a destrict of a capital and some nerv-gas
will be collected on top of the hill.
Your will loosing your hairs before you can
protect yourself with a gas mask or you loosing your life!
Important also the way from where the wind cames !!
Old hidden knowledge should be protected.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
I recently purchased a respirator. It says " Organic Vapors and Acid Gases with P100 particulate filter" on the package. The cartridge
number is R53HE-P100. However the actual cartridge says "Approved to provide respiratory protection against organic vapors, chlorine, hydrogen
chloride, sulfur dioxide, chlorine dioxide, and hydrogen fluoride with a P100 particulate filter which is effective against all solid & liquid
aerosols (99.97% filter efficiency level)."
Are these cartridges good enough for nitric acid fumes? On one hand it is an acid gas/organic vapour cartridge,but on the other hand nitric acid is
not mentioned specifically, while HCl is.
|
|
|
uber luminal
Hazard to Others
Posts: 124
Registered: 25-8-2004
Member Is Offline
Mood: No Mood
|
|
the important part of the gas mask is the filter. You could buy a chemical resistant half mask, put in the filters (assuming they fit exactly) and
wear chemical goggles.
as for Cl in the lungs, when I had my exposure, I freaked out and called the poison control center and told them exactly what happened. (so they would
know it was Cl2 rather than some other gas, with me thinking its Cl2). The guy on the phone joked that I would either be dead or in a hospital if I
was in any real danger, but that I should go to a doctor asap, or emergancy room if I was having a difficult time breathing while trying to sleep
(laying down) over the next 48 hours. He said if I survive a week without any breathing issues, I am probably off the hook this time.
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
I bought a new ex-army gas mask from a war surplus shop in New Zealand a few years ago, for about $NZ30.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
uber luminal, the filter is the same thing as the cartridges.
The origional question still stands, are these cartridges good enough for nitric acid fumes? I know a separate type of cartridge is needed for NO2,
but is another type needed for nitric acid when it is an acid gas respirator?
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Is it just me who's wondering if this is a good topic for discussion.
Let's face it, a bad gas mask is worse than none at all and buying over the 'net doesn't usually come with much of a warranty. Even if
they do offer a lifetime guarantee, that's the problem... how long will your lifetime be if you rely on a mask.
It reminds me of the scam about selling nuclear shelters, it didn't matter how bad you made them, you never got a complaint form a dissatisfied
customer.
|
|
|
MadHatter
International Hazard
Posts: 1346
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Concentration
I wonder how high the concentration of chlorine was ? I've been exposed to it many
times during chlorate production. I would also wonder about adequate ventilation. I keep
a fan in front of my window when running the cell. If I go to a larger cell(currently 2 gallons)
I may find myself in need of a gas mask. For right now that gas is an irritant more than
anything else. No complaints from the neighbours - YET ! I've smelled chlorine coming
from some of their apartments as well. Am I living in a building full of pyros ? 
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
|
sparkgap
International Hazard
Posts: 1234
Registered: 16-1-2005
Location: not where you think
Member Is Offline
Mood: chaotropic
|
|
MadHatter:
"...No complaints from the neighbours - YET ! I've smelled chlorine coming
from some of their apartments as well..."
Three things off the top of my head:
1) They have indoor swimming pools 
2) They just happen to be crazy about chlorine-bleaching their homes (you know, with all the ph3ars0m3 bacteria lurking about...).
3) (most unlikely) they are doing the same experiments as you are, and so you should be talking to them more.
unionised:
"...you never got a complaint from a dissatisfied customer..."
Well, I quote, "Dead men tell no tales..."
sparky (^_^)
P.S. My country shall fear me now... (points to the left)
[Edited on 13-4-2005 by sparkgap]
"What's UTFSE? I keep hearing about it, but I can't be arsed to search for the answer..."
|
|
|
MadHatter
International Hazard
Posts: 1346
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Chlorine
No indoor swimming pools here ! I'm hoping for fellow pyros who are not KEWL !
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
|
Zinc
Hazard to Others
Posts: 472
Registered: 10-5-2006
Member Is Offline
Mood: No Mood
|
|
My chemistry teacher gave me and my friend gas masks (to each of us one). They are very old (45 years) so I think that they do not work anymore.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I never have felt the need for a gas mask. Small scale gas experiments I do under a fume hood (not a professional one, but good enough to draw away
test tube scale emissions of toxic gasses like Cl2, H2S, SO2). I only do experiments under these conditions with gasses that I can smell very well
(Cl2, Br2, SO2, NO2, H2S, HN3, NH3, and a few more, but for me not HCN).
When I perform experiments on a little larger scale (erlenmeijer stuff, 50 ml or more), then I definitely go outside and wait for a dry and windy day
(and we have a lot of those over here in NL ) for the experiments. I am lucky to
have a large backyard, so there are no unwanted people wondering what all that hassling with glasswork and chems is.
Having to wear a gasmask seems most unpleasant to me. I expect it to feel very warm and sweaty.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
