justanamatuer
Harmless
Posts: 1
Registered: 31-10-2018
Member Is Offline
|
|
phosphoric acid identification
i'm not going to beat around the bush here so here goes. my mate has gone to jail for dealing meth. in my possession is a big container labeled
phosphoric acid. thing is I remember him saying something about the wrong label on it & it being hypophos. how can I tell which one is which?
its very heavy and is only half full. the liquid almost looks like runny oil and it smells quite sour.
is there a test I can do? or do the 2 look and smell different? thanks for any help
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Hypophosphoric acid reduce Ni2+ to the metal but H3PO4 don't.
|
|
|
happyfooddance
National Hazard
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
Why, oh why, did anyone need to know about your friend going to jail? Do you think that has any relevance to the chemistry of phosphoric acid? Do you
think people are more or less likely to help you knowing this useless tidbit?
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
What difference does it make to you, anyway ─ is the next question?
|
|
|
Jackson
Hazard to Others
Posts: 189
Registered: 22-5-2018
Location: U S of A
Member Is Offline
Mood:  Happy about new glassware
|
|
If you have a distillation apparatus, maybe distill it and compare its BP to phosphoric and hypophosphoric acids to determine what it is.
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Quote: Originally posted by Jackson  | | If you have a distillation apparatus, maybe distill it and compare its BP to phosphoric and hypophosphoric acids to determine what it is.
|
hypophos decomp @130C but phos dec @158C. How could one determine whether the sample is decomposing?
|
|
|
Jackson
Hazard to Others
Posts: 189
Registered: 22-5-2018
Location: U S of A
Member Is Offline
Mood: Happy about new glassware
|
|
If it evolves a gas when decomposing than you could tell by the solution bubbling
|
|
|
Vomaturge
Hazard to Others
Posts: 286
Registered: 21-1-2018
Member Is Offline
Mood: thermodynamic
|
|
| Quote: Originally posted by happyfooddance | | Why, oh why, did anyone need to know about your friend going to jail? Do you think that has any relevance to the chemistry of phosphoric acid? Do you
think people are more or less likely to help you knowing this useless tidbit? |
Because, if he hadn't included it, we'd be asking him why he had a chemical in a labeled bottle, but suspected it could be mislabeled. It sounds like
his friend owned the chemicals before, and left it with him when he went to jail. He may have mislabeled it as "phosphoric acid", and it may have been
hypophosphoric or even hypophosphorous.
Personally, I'd be reluctant to keep any chemical given to me by someone suspected of dealing drugs. Even if it is something legal, receiving it from
your friend could make the authorities suspicious that you were involved with the drugs. Also, don't breathe or smell mineral acids (or any
unidentified compound) if you can avoid it. Some are very harmful when inhaled.
As far as identifying it, maybe try a combination of titration and density measurements? Or, a melting/freezing point measurement?
[Edited on 1-11-2018 by Vomaturge]
Also, unionised idea below for testing for hypophosphorous acid looks like a great, straightforward one. Add it to copper sulfate, and you'll
eventually get copper hydride.
Of course, if what you have is actually hypophosphorous acid, then you are probably (depending on where you live) breaking the law just by owning it!
[Edited on 1-11-2018 by Vomaturge]
|
|
|
happyfooddance
National Hazard
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
No, in fact it is still the same question. Thanks for rephrasing it though.
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Or it is boiling.
I'm fairly sure that hypophosphite reduces copper salts- like teh sulphate- to the metal.
By the way...
https://en.wikipedia.org/wiki/DEA_list_of_chemicals
|
|
|
nezza
Hazard to Others
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
Hypophosphorous acid is a very strong reducing agent. It will reduce Cu++ to the metal and it will CERTAINLY reduce iodide to iodine. Phosphoric acid
will do neither.
If you're not part of the solution, you're part of the precipitate.
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
| Quote: Originally posted by nezza | | Hypophosphorous acid is a very strong reducing agent. It will reduce Cu++ to the metal and it will CERTAINLY reduce iodine to
iodide. Phosphoric acid will do neither. |
Corrected for ya
|
|
|
chornedsnorkack
National Hazard
Posts: 564
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
I am not confident that heating suspected hypophosphorous acid to test for decomposition is a safe idea.
Consider what the likely decay reactions are:
2H3PO2->H3PO4+H3P
3H3PO2->2H3PO3+H3P
Phosphine is poisonous.
By contrast, pure phosphoric acid should only give off pure water vapour:
2H3PO4->H7P2O7+H2O
little acid volatilized below, say, 700 degrees.
Thus testing for hypophosphorous acid should rather rely on its reducing properties.
Some tests might also be sensitive to phosphorous acid, or contamination of phosphorous or hypophosphorous acid in majority of phosphoric acid; but if
the aim is to rule out pure phosphoric acid as labelled then finding reducing properties should be enough.
|
|
|
Mesa
Hazard to Others
Posts: 264
Registered: 2-7-2013
Member Is Offline
Mood: No Mood
|
|
Phosphine is not only poisonous, it combusts spontaneuously in air.
This is much more relevant hazard to be aware of when heating H3PO3/H3PO2 to decomp temps.
|
|
|
chornedsnorkack
National Hazard
Posts: 564
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Mesa | Phosphine is not only poisonous, it combusts spontaneuously in air.
This is much more relevant hazard to be aware of when heating H3PO3/H3PO2 to decomp temps.
|
Not so much.
Spontaneous combustion happens because the reaction
H3P+2O2->H3PO4 is exothermic, and when phosphine is at high concentrations, it can happen with thermal
runaway.
If you have hot steam with appreciable impurity of phosphine, then the phosphine being diluted with steam may be too dilute for ignition - yet still
at relevant concentrations for toxicity.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
