monolithic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 436
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Buchi B-169 vacuum recirculating aspirator for sale!
I recently came into possession of a Buchi B-169 recirculating aspirator. This is the 120V / 300W North American model. It's quite old but works
perfectly -- I tested it with my cheap vacuum gauge and it pulls about 30" Hg. Per the manufacturer:
Quote: | Safely aspirates corrosive and volatile solvents without cold or chemical traps. Vapors are condensed and diluted in an internal 10 L PP reservoir for
easy disposal. Two vacuum ports equipped with quick coupling connectors and check valves, each with a free air displacement of 12 to 15 L/min.
Achieves a vacuum of 20 mbar at a water temperature of 20 °C. Circulating pump is quiet and requires no oil or filter/trap replacements. Use with
rotary evaporators, distillation or filtration apparatus, and electrophoresis gel driers. CE compliant. |
I will post some pictures once I clean it up a bit, most likely tomorrow. I'm asking $250 plus shipping to the continental United States.
[Edited on 25-9-2018 by monolithic]
|
|
Loptr
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
Sounds very useful!
"Question everything generally thought to be obvious." - Dieter Rams
|
|
monolithic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 436
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
I almost want to keep it for myself, but no room!
|
|
monolithic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 436
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
As promised, the pictures are available here: https://imgur.com/a/WtwGJZI
I noticed that only one of the vacuum ports is connected to the aspirator -- the one that I tested. The other one should work fine, though. As you can
see, it pulls its rated vacuum.
Again, I am asking $250 + S&H. Send me a U2U if you wish to know more or want to calculate shipping. It's quite large (18.5"x18.5"x19" @ 20 lbs)
so it will probably cost a fair amount of money to ship.
[Edited on 26-9-2018 by monolithic]
|
|
monolithic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 436
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Dropping the price to $200 plus shipping. I was playing around with it the other night and noticed one of the venturi aspirators is missing (the
threaded pipe in the foreground of picture #3, should be a cylindrical shiny piece like the one in the background in the same picture) which is why
only one of the vacuum ports works. I feel like an idiot for not noticing this earlier. At any rate, the functioning vacuum port works perfectly and
the "dead" one will work perfectly if you find/make a threaded venturi aspirator for the other port.
[Edited on 22-11-2018 by monolithic]
|
|
monolithic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 436
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Item has been sold.
|
|