Hegi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 199
Registered: 27-9-2013
Member Is Offline
Mood: No idea.
|
|
Cheap IR and Raman measurements
Hi guys,
recently I got access to Infrared and Raman spectrophotometers (Thermo Scientific) at my company. If anyone is interested in using my services I am
able to measure you spectra of the solid and also liquid samples for minimum fees.
The IR spectrometer is working in the range 4000-650 cm-1 (ATR technique). The amount needed for measurement is roughly few miligrams to cover the
diamond holder.
The Raman excitation wavelength is 532 nm. The spectrophotometer is portable and is primarily designed for bigger samples but small vial (2-3 mL) of
your sample or 100 mg is enough.
If needed I can send you the samples back. The measurement time will be set up to reach the high quality of spectra. If you are interested,
please feel free to contact me via U2U.
EDIT: I am located in the Czech republic. The shipping cost from Europe is almost nothing whereas up to my knowledge small samples
from the USA should be affordable as well.
The price depends on number of samples and your specific request.
[Edited on 3-9-2018 by Hegi]
Our webpage has been shut down forever cause nobody was willing to contribute. Shame on you all!!!
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
This is a wonderful offer, Hegi. I am sure there will be some here who follow up on this.
You might want to edit and put your location in the OP so that members have some notion of shipping and turnaround times.
If this is an ongoing thing and well used by members then it can probably become a sticky.
|
|
Hegi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 199
Registered: 27-9-2013
Member Is Offline
Mood: No idea.
|
|
Quote: Originally posted by j_sum1 ![](images/xpblue/lastpost.gif) | This is a wonderful offer, Hegi. I am sure there will be some here who follow up on this.
You might want to edit and put your location in the OP so that members have some notion of shipping and turnaround times.
If this is an ongoing thing and well used by members then it can probably become a sticky. |
j_sum1, thanks for your support and suggestion. I edited the original post. I really know how hard it was for me several years ago to characterize
compounds I prepared at home. As long as I am not very busy at the workplace, I can measure samples right after their arrival and electronically send
data to users.
Our webpage has been shut down forever cause nobody was willing to contribute. Shame on you all!!!
|
|
DavidJR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Interesting... might help to give an example of cost.
Now that I have HPLC in my garage I would also consider doing something like this.
|
|
Hegi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 199
Registered: 27-9-2013
Member Is Offline
Mood: No idea.
|
|
Quote: Originally posted by DavidJR ![](images/xpblue/lastpost.gif) | Interesting... might help to give an example of cost.
Now that I have HPLC in my garage I would also consider doing something like this. |
I strongly suggest it to you. You may help many people and earn some money yourself to run the machine.
Considering all aspects (manipulation with sample, measurement, machine running costs) I think it would be reasonable to start at 5$ per sample. Of
course, with the increasing number of samples the price will rapidly fall down.
Let´s say for 5 samples you would only be charged 20$ instead of 25, for 10 and more samples 3$ per sample... as most probably ten samples will
arrive together and I will not be forced to visit the post office 10 times.. and start machine ten times..
Our webpage has been shut down forever cause nobody was willing to contribute. Shame on you all!!!
|
|
Loptr
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
What are the legal ramifications if someone sends you an illegal drug? I am asking about for yourselves.
"Question everything generally thought to be obvious." - Dieter Rams
|
|
Hegi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 199
Registered: 27-9-2013
Member Is Offline
Mood: No idea.
|
|
Quote: Originally posted by Loptr ![](images/xpblue/lastpost.gif) | What are the legal ramifications if someone sends you an illegal drug? I am asking about for yourselves. |
I don´t care about substance itself if it is delivered in such a small amount. I will measure and send data. If requested I can match it with
database or identify functional groups. By the way, it is prohibited to store even potassium permanganate at home in many countries...
Our webpage has been shut down forever cause nobody was willing to contribute. Shame on you all!!!
|
|
DavidJR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Quote: Originally posted by Hegi ![](images/xpblue/lastpost.gif) | Quote: Originally posted by DavidJR ![](images/xpblue/lastpost.gif) | Interesting... might help to give an example of cost.
Now that I have HPLC in my garage I would also consider doing something like this. |
I strongly suggest it to you. You may help many people and earn some money yourself to run the machine.
Considering all aspects (manipulation with sample, measurement, machine running costs) I think it would be reasonable to start at 5$ per sample. Of
course, with the increasing number of samples the price will rapidly fall down.
Let´s say for 5 samples you would only be charged 20$ instead of 25, for 10 and more samples 3$ per sample... as most probably ten samples will
arrive together and I will not be forced to visit the post office 10 times.. and start machine ten times.. |
That's very reasonable I think.
Re HPLC:
I think that would be a bit trickier since the chromatogram of a sample can change dramatically depending on the conditions, so would possibly require
several runs to get a good result. If there was an already known/published HPLC method then that would be useful. I would also need to consider the
cost of consumables (solvents, autosampler vials, syringes, filters, etc).
However if anyone (UK/EU easiest) here has some samples they'd like me to run I'm happy to discuss that. I only have reverse phase C18 columns
currently. It'd be most useful if you had a few related samples to run under the same conditions to compare (for example, the starting materials
individually as well as the product of a synthesis).
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Could you maybe explain what would be expected from a Raman spec test? I'm really not familiar with this process at all (IDK how many really are..?)
and I looked at a few sources and they seems to show 3-4 different types of testing, and they vary in what they excel in.
Would this be good to determine the purity of a compound? Like if someone made a salt of CuSO4 of NiSO4 and they wanted to see what kind of
contaminates are present, would this work for this application?
|
|
Hegi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 199
Registered: 27-9-2013
Member Is Offline
Mood: No idea.
|
|
Quote: Originally posted by RogueRose ![](images/xpblue/lastpost.gif) | Could you maybe explain what would be expected from a Raman spec test? I'm really not familiar with this process at all (IDK how many really are..?)
and I looked at a few sources and they seems to show 3-4 different types of testing, and they vary in what they excel in.
Would this be good to determine the purity of a compound? Like if someone made a salt of CuSO4 of NiSO4 and they wanted to see what kind of
contaminates are present, would this work for this application? |
Basically Raman and IR spectroscopy can help you identify the nature of bonds present in your compound and also local symmetries (Raman). For sure you
detect mixtures and purity of your compound by matching your spectra with database data. Sometimes it can be easily detected without any matching too.
Our webpage has been shut down forever cause nobody was willing to contribute. Shame on you all!!!
|
|
quadrupole
Harmless
Posts: 4
Registered: 14-9-2018
Member Is Offline
|
|
Quote: Originally posted by DavidJR ![](images/xpblue/lastpost.gif) | Quote: Originally posted by Hegi ![](images/xpblue/lastpost.gif) | Quote: Originally posted by DavidJR ![](images/xpblue/lastpost.gif) | Interesting... might help to give an example of cost.
Now that I have HPLC in my garage I would also consider doing something like this. |
I strongly suggest it to you. You may help many people and earn some money yourself to run the machine.
Considering all aspects (manipulation with sample, measurement, machine running costs) I think it would be reasonable to start at 5$ per sample. Of
course, with the increasing number of samples the price will rapidly fall down.
Let´s say for 5 samples you would only be charged 20$ instead of 25, for 10 and more samples 3$ per sample... as most probably ten samples will
arrive together and I will not be forced to visit the post office 10 times.. and start machine ten times.. |
That's very reasonable I think.
Re HPLC:
I think that would be a bit trickier since the chromatogram of a sample can change dramatically depending on the conditions, so would possibly require
several runs to get a good result. If there was an already known/published HPLC method then that would be useful. I would also need to consider the
cost of consumables (solvents, autosampler vials, syringes, filters, etc).
However if anyone (UK/EU easiest) here has some samples they'd like me to run I'm happy to discuss that. I only have reverse phase C18 columns
currently. It'd be most useful if you had a few related samples to run under the same conditions to compare (for example, the starting materials
individually as well as the product of a synthesis).
|
do it.
I usually charge $40/sample, but because it's UHPLC-MS
|
|
egret
Harmless
Posts: 20
Registered: 22-2-2018
Member Is Offline
Mood: No Mood
|
|
I am so sorry, I know one year is gone. So is this great offer stil active?
It would be help a lot.
[Edited on 12-9-2019 by egret]
|
|