Pages:
1
2 |
violet sin
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1477
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline
Mood: Good
|
|
Suggested brands?
I was wondering if anyone in the US, west coast Ca if it matters, has a favorite stripper (lol) for distilling. I know I could pour over a bunch
of MSDS sheets and do the work my self looking for higher DMC content. that alone won't help me weed out those that are problematic for other reasons
like foaming up, unreasonable tar, hard to separate co-solvents.
If it's too much like spoon feeding, I get it. Just trying to avoid the hassle of buying the wrong ones. Don't need much, don't have a specific use
either, so it's not a pressing mater at all. But I could always buy a can from time to time n just leaving it on the shelf till one day when
necessity calls and time is free.. distillation will happen.
So if you have a favorite and don't mind sharing, then cool beans, I'm all ears. Likewise if your afraid of sharing your source for fear it will be
yanked, I get it. Thanks
|
|
UC235
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 565
Registered: 28-12-2014
Member Is Offline
Mood: No Mood
|
|
I'm not sure how it stands up to other brands, but I've always used Kleanstrip Premium. It's like $20-$25/gallon and I usually recover about 1.6L of
DCM. It's been a while, so that yield might be off. I originally thought the sprayable version had less DCM, but the SDS doesn't show that currently.
As for dealing with the glop in the stuff, I soldered a piece of copper pipe into a cap for one of their cans and just distill directly out of the
gallon using a hot water bath and a Friedrich condenser. I might have poured some out at the start to give the can headspace and then added it back in
later.
[Edited on 16-5-2018 by UC235]
|
|
AvBaeyer
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 647
Registered: 25-2-2014
Location: CA
Member Is Offline
Mood: No Mood
|
|
I simply cannot understand why anyone would go to the trouble of distilling paint remover to get methylene chloride. It really seems like non-cost and
non-time effective self flaggelation. Perhaps there is some deep need to beat the system.
For $70 you can get a gallon of the stuff delivered to your door. The quality of this material is excellent. And it looks like it is very cost
competitive with paint stripper material.
https://www.ebay.com/itm/Dichloromethane-1-Gallon-Methylene-...
AvB
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
I never had a problem with the thixotrope ("glop"). It seems to sinter together in a kind of pancake at distillation temp, and can be pulled out
during cleanup with a brush in one big pull. Some residual DCM fumes at the sink, but aside from that, soap and hot water gets the flask clean.
That said, on this news I went and laid in a gallon of sprayable Kleanstrip, to supplement the half gallon or so of semi paste I still have.
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4552
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by AvBaeyer ![](images/xpblue/lastpost.gif) | I simply cannot understand why anyone would go to the trouble of distilling paint remover to get methylene chloride. It really seems like non-cost and
non-time effective self flaggelation. Perhaps there is some deep need to beat the system.
For $70 you can get a gallon of the stuff delivered to your door. The quality of this material is excellent. And it looks like it is very cost
competitive with paint stripper material.
https://www.ebay.com/itm/Dichloromethane-1-Gallon-Methylene-...
AvB | The price is certainly not competitive. A gallon of KleanStrip Premium, as mentioned by UC235, is $23 at
Home Depot. I can then take that, quickly distill the entire thing very quickly in two batches using my rotovap, wash with water to remove methanol,
dry it over CaCl2 and do a final distillation with the rotovap. It sounds like a long process but it's really not much work, and it's
something that can be done in the background while I'm working on other things. There's no "deep need to beat the system," at least not for me.
Edit: and actually, I use the sprayable stuff: it has less glop but not any less DCM. In fact the yield might actually be better since there is less
goop for it to become entrained in.
[Edited on 5-17-2018 by Texium (zts16)]
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
For $70 you can get like three liters of DCM from distilling a gallon of paint stripper and also have a gallon of nitromethane delivered directly
to your door!
There's always more reagents to buy, so if I can save $30-$40 on a reagent, I can use that to buy more reagents!
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Quote: Originally posted by Melgar ![](images/xpblue/lastpost.gif) | For $70 you can get like three liters of DCM from distilling a gallon of paint stripper and also have a gallon of nitromethane delivered directly
to your door!
There's always more reagents to buy, so if I can save $30-$40 on a reagent, I can use that to buy more reagents! |
?? care to explain how? what brands, where?
|
|
violet sin
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1477
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline
Mood: Good
|
|
My msds or sds search last night showed kleenstrip premium stripper 60-100% DCM /gal. Others were same or less in the common diy brands. It's like
25$ + tax /gal at the local hardware store. Minimum retrieved would be 2.27 litres assuming 100% effective separation.
ACE hardware people get mailed coupons for discounts if you spend over 25$ a couple times a year. It could be cheaper if you try harder.
25$ I can budget easily, 70$ requires I... 1) have not bought anything else for myself recently, or 2) have a money generating need for it, or 3) I
don't mind debating the misses for the rights to spend our money on my hobby.
RogueRose: I assume the paint stripper part was obvious, not sure on the nitromethane.
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Well, sin
There is a major supplier in Sacramento.
Wants 70 bucks per gallon, on-line.
Perhaps the out the door price, minus shipping, is a lot better.
Plan on being in Sacramento anytime soon?
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Quote: Originally posted by violet sin ![](images/xpblue/lastpost.gif) | My msds or sds search last night showed kleenstrip premium stripper 60-100% DCM /gal. Others were same or less in the common diy brands. It's like
25$ + tax /gal at the local hardware store. Minimum retrieved would be 2.27 litres assuming 100% effective separation.
ACE hardware people get mailed coupons for discounts if you spend over 25$ a couple times a year. It could be cheaper if you try harder.
25$ I can budget easily, 70$ requires I... 1) have not bought anything else for myself recently, or 2) have a money generating need for it, or 3) I
don't mind debating the misses for the rights to spend our money on my hobby.
RogueRose: I assume the paint stripper part was obvious, not sure on the nitromethane. |
Yeah, well the last part is kind of big, and if you can get nitromethane out of the same gallon, I'm kind of interested. Maybe by adding another
reagent?
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Ah, sorry for any misunderstanding. My point was that if I spent $70 (well, maybe $75-$80, realistically), I could both buy a gallon of paint
stripper and distill the DCM out of it, and also mail-order a gallon of nitromethane for about $50. You can't actually distill nitromethane from
paint stripper.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
violet sin
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1477
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline
Mood: Good
|
|
RogueRose: Yeah, well the last part is kind of big, and if you can get nitromethane out of the same gallon, I'm kind of interested.
-------------
I just figured the statement implied two separate transactions, one of which we were talking about and one thrown on top unrelated to prove the value
of money saved by distilling the DCM yourself. But I looked at a lot of stripper SDS sheets yesterday with out seeing NM mentioned anywhere, which
probably gave rise to the easy distinction of sources. No rudeness implied, I half expected to see it listed somewhere on an eBay site. No sir, I
have no idea the source sorry. That's a chem I don't think I'd much relish distilling though, purpose bought if that.
Zed: I will have to check that place out some time. Sac's about an hour and half from home. Easily worth the drive. Last Craig's list purchase
couple years back was same time driving to get an acetylene tank, and I thought I'd be excited about that one. Thanks for the heads up
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Damn it. Nitromethane seems to have gone up in price to $80/gallon with UPS ground shipping, in the US. That comes out to $20/liter, which is a
pretty common price to pay for reagents, so I guess it's not THAT bad yet.
Incidentally, don't they give stores basically an infinite amount of time to sell off their remaining stocks? If I'm remembering correctly, that's
standard protocol for phasing out a consumer product, unless there's been some research done showing that something is far more dangerous than anyone
thought. And DCM is still the same moderately hazardous substance that we already knew it was.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
DavidJR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Re the DCM in paint stripper ban and safer alternatives: I have found benzyl alcohol based paint strippers which work pretty well, and are certainly
much less hazardous (not toxic, not carcinogenic, and not especially flammable).
|
|
j_sum1
|
Thread Split 15-7-2018 at 20:16 |
Pages:
1
2 |