fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Make Alkali metals from controlled decomp of azides??
Alkali azides explode on heating to form respective AM and N2 is a well known fact.
But is it possible to heat carefully/ in a controlled manner to make it decomp slower and isolate the AM formed? If so how?
|
|
|
RawWork
Hazard to Others
Posts: 167
Registered: 10-2-2018
Member Is Offline
|
|
It's suspicious. They are sensitive to shock, friction, etc. But if we take that out of consideration, they can be decomposed by using lower
temperatures. Who knows, maybe azides are sensitive because of reaction with oxygen. If that's true, that means they are not sensitive, and just heat
them however you like. If they are, if we ignore friction and other possible death and explosion possibilities, by boiling them in container which is
placed on water, in that case it will have max temperature of 100 C obviously. If no reaction observed, then move to some higher boiling point liquid
as bath for container. Maybe each increased by 20 or 50 C. Or just add more salt to water and use that like that...if you know what i am talking
about. This is based on fact that when you immerse sodium azide container in liquid, liquid won't be able to heat above it's boiling point, and
temperature can be kept cosntant.
I read in various terrorism books that whenever you try/test or work first time with something, do it with extremely small quantity, about size of
fingertip or less. That's called practice. Theory is another world, practice is another. We can only talk here. Useless. Test it, see what you
observed, detect differences... Try with air presence, then without. Maybe it's explosive only in air, but not when alone or with N2. That makes
sense.
According to "handbook of inorganic chemicals":
In the laboratory, nitrogen may be generated by several methods, such as carefully decomposing sodium azide: 2 NaN3 → 2 Na + 3
N2
Potassium can be produced by thermal decomposition of potassium azide: 2 KN3 → 2 K + 3N2
Although it says: "Sodium azide is a toxic as well as an explosive substance".
So you see it works, although it's explosive, so beware, safety first, in small portions 
[Edited on 12-4-2018 by RawWork]
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Go watch a slow motion video of an auto airbag inflating.
Please do not try this. If you provoke an azide into decomposing, it will probably do so rather briskly, with lots of hot N2. I lost some hair to this
reaction some years ago, and was just lucky not to do worse dammage.
The metal will be a vapor, you won't capture it easily, or at all, most likely. Sodium azide is fairly expensive as well as somewhat hard to obtain in
many countries. Save it for better uses.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
NeonPulse
Hazard to Others
Posts: 417
Registered: 29-6-2013
Location: The other end of the internet.
Member Is Offline
Mood: Isolated from Reality! For Real this time....
|
|
There’s this video: https://www.google.com.au/url?sa=t&source=web&cd=1&a... here is the follow up:
http://chemistry-chemists.com/N6_2016/ChemistryAndChemists_6...
I did visit the page where the poster describes his attempt however it was in Russian and needed to be translated. He had no real success in actually
isolating the metal and even described doing it under vacuum. He stated that once it was bought back up to atmospheric pressure the metal oxidised
immediately. It seems to reach a point where it decomposed almost instantaneously on heating. I will be trying this very method in the near future to
see if I can improve on the process but judging by the post he wrote it looks doubtful. Perhaps charging the tube with argon may help. I probably
wouldn’t say that this is a viable method to obtain barium but experimentation needs to prove or disprove the idea.
|
|
|
BromicAcid
International Hazard
Posts: 3254
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Decomposing alkali azides to yield the free metal is a very old and well known technique. IIRC it was at one time the main method of preparation of
cesium in the labratory (back when it was still a curiosity). I do not have any refs on hand but I have read many over the last few decades. Will
try to find something for you later.
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Quote: Originally posted by Bert  | Go watch a slow motion video of an auto airbag inflating.
Please do not try this. If you provoke an azide into decomposing, it will probably do so rather briskly, with lots of hot N2. I lost some hair to this
reaction some years ago, and was just lucky not to do worse dammage.
The metal will be a vapor, you won't capture it easily, or at all, most likely. Sodium azide is fairly expensive as well as somewhat hard to obtain in
many countries. Save it for better uses.
|
Actually you can make it from hydrazine & nitrite.
[Edited on 13/4/18 by fukko]
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
OK,
Don't play with sodium azide- it's roughly as toxic as sodium cyanide.
However, heating sodium azide won't generally cause and explosion (unlike the heavy metal azides).
Posting videos of airbags as a basis for saying you shouldn't heat azides makes as little sense as posting videos of gunpowder and saying "that's why
you shouldn't heat sulphur".
The stuff in airbags is* a mixture of sodium azide, potassium nitrate and silica.
Without the oxidant , the reaction is much less violent.
The nitrate is there to speed up the reaction so the bag inflates quickly.
The silica is there as an acid anhydride to react with the sodium oxide that is formed.
It is considered better to have the sodium oxide react with the silica, rather than with the face/ lungs/ eyes of the person who hits the airbag.
Sodium silicate's not very nice but it's less of an issue than the oxide would be.
* I think it may be a case of it "was", rather than it "is", the azide's toxicity made it unpopular.
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
I would agree, he is at least as likely to poison himself as burn/blow himself up. If he can get the pure chemical, he would certainly be more likely
to poison himself- But:
If you are a kid out looking for some Sodium azide, what is your probable source? A junked airbag unit from an old car??? Maybe we could open that
can up quicker with power tools, a grinder should work good?
Shortly after the good idea fairy strikes, there might be a quick, hot POOOF!
[Edited on 4-16-2018 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
dillee1
Harmless
Posts: 9
Registered: 1-4-2016
Member Is Offline
Mood: No Mood
|
|
Just curious why would you want to manufacture your own sodium metal? Given that this industrial metal is both cheap and easily available from market?
|
|
|
LearnedAmateur
National Hazard
Posts: 513
Registered: 30-3-2017
Location: Somewhere in the UK
Member Is Offline
Mood: Free Radical
|
|
There are multiple reasons why, if you take a look at various synthesis threads around the forum you’ll see your sort of question pop up, to which
there will be various answers along the lines of:
It’s a chemistry exercise to study the reaction,
The reagent isn’t available where (OP) lives,
The reagent is too expensive for (OP’s) budget whereas the precursors are not,
Post/couriers won’t ship this reagent; amongst others.
I myself have bought sodium metal before but if there’s a chance and cheap/free way to make it, andyou’ll learn something in the process - maybe
not ‘this is how I lose hair and/or fingers’ - then that’s a good reason to do it yourself.
In chemistry, sometimes the solution is the problem.
It’s been a while, but I’m not dead! Updated 7/1/2020. Shout out to Aga, we got along well.
|
|
|
woelen
Super Administrator
Posts: 8031
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I tried the making of sodium from NaN3 in small amounts. It actually works, but you lose a lot of the sodium in the process in the form of a grey
mist.
I did the experiment as follows (do this OUTSIDE, there is a chance of cracking and instant fire):
- Take a big spatula of NaN3 and put this in a large test tube (18 mm diameter, 20 cm length).
- Pour in some liquid butane gas, or blow away the air with propane. Even better is nitrogen or argon. Do not use CO2.
- Immediately loosely stopper the test tube with a piece of cotton wadding. I used the liquid butane option because after stoppering the test tube
with the piece of wadding, still some gas is produced by evaporation, making the test tube really free of air.
- Once there is only NaN3 and the gas in the test tube, start heating carefully.
- At a certain point, a violent but not explosive reaction occurs. The NaN3 quickly decomposes, giving off a grey mist, and small globules of matallic
Na remain behind in the bottom of the test tube. The glass of the test tube becomes covered with a greyish "frost".
- Allow the test tube to cool down and open it. The grey "frost" turns white almost immediately when air comes in the test tube.
I simply added some water to the test tube. You nicely see pieces of orange fire and see violent fizzling when the little globules come in contact
with the water.
Based on my experience, I do not consider this a good method of making sodium. You lose a lot, as it appears in the form of a mist/smoke, which cannot
easily be isolated, and the reaction is quite dangerous. I would not feel comfortable scaling it up to multi-gram quantities.
|
|
|
dillee1
Harmless
Posts: 9
Registered: 1-4-2016
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by woelen | | I tried the making of sodium from NaN3 in small amounts. It actually works, but you lose a lot of the sodium in the process in the form of a grey
mist. |
Given that the boiling point of sodium being 883^C, it wouldn't be surprising sodium created is mostly in vapor phase, with some sodium condense on
container wall as metal sweat.
So unless the container+atmosphere is bone dry and very clean(no metal oxide contaminant from tap water etc), the sodium vapour/sweat will immediately
reacts with aforesaid. End product will be contaminated with sodium oxides/hydroxide/elemental transition metals. It won't be the ultra pure sodium
metal as OP desired.
This go back to my question why does OP want to synth his own sodium metal. Industrial grade sodium are cheap and widely available. Ultra pure sodium
need lab grade equipment and air free technique to obtain. Even for the later there are better way to get it than decomposing azide.
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
OP asked about 'alkali metals' in general. He did not specifically say thay he wanted sodium.
As Bromic pointed out, this used to be a common method for the preparation of ceasium, and IIRC for rubidium too.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
RawWork
Hazard to Others
Posts: 167
Registered: 10-2-2018
Member Is Offline
|
|
I don't know why azide, why not nitride? I mean nitrogen is available and data about nitrides is more available than for azides. Maybe he wants
Lithium. But making azides and nitrides is bigger challenge than making pure elements from them.
|
|
|
woelen
Super Administrator
Posts: 8031
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Alkali azide is much better characterized than alkali nitride. I never have seen a compound like Na3N being offered and I doubt it is available
commercially (it may not even exist in a pure state). Even a compound like NaNH2 already is hard to keep around (much harder than NaN3) and the
compounds Na2NH and Na3N (if they exist) must be amazingly hard to keep around. They must be quite unstable and extremely air-sensitive. I know that
NaNH2 tends to form explosive mixtures when stored in contact with air.
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
| Quote: Originally posted by phlogiston | OP asked about 'alkali metals' in general. He did not specifically say thay he wanted sodium.
As Bromic pointed out, this used to be a common method for the preparation of ceasium, and IIRC for rubidium too. |
Yes, I asked about alkali metals in general, not specifying Na.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
