CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Separating metals out of a coin
How would you suggest separating the metals from an alloy of 80% Cu, 15% Zn and 5% Ni (a certain coin in my country)? I was thinking of dissolving
them in nitric acid and then adding sodium carbonate, which would precipitate the carbonates in increasing order of solubility product, but I can't
seem to find the solubility product of ZnCO3. Would this method work and what is the solubility product of ZnCO3?
[Edited on 13-3-2018 by CobaltChloride]
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
I'd start (after dissolving in acid, of course) by adding enough sodium hydroxide to precipitate the copper and nickel as hydroxides, while dissolving
the zinc as a complex ion.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
walruslover69
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 228
Registered: 21-12-2017
Member Is Offline
Mood: No Mood
|
|
I found a literature source for zinc carbonate to be 1.46×10^-10. What are you wanting as an end result? do you need to separate all three metals
into individual compounds or is there just one specific one that you need? Dissolving in nitric acid is a good first step but trying to separate
carbonates based on solubility is probably not the best path to go down.
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Quote: Originally posted by walruslover69 ![](images/xpblue/lastpost.gif) | I found a literature source for zinc carbonate to be 1.46×10^-10. What are you wanting as an end result? do you need to separate all three metals
into individual compounds or is there just one specific one that you need? Dissolving in nitric acid is a good first step but trying to separate
carbonates based on solubility is probably not the best path to go down. |
I only really want the nickel.
Not really based on solubility, but I was thinking that the carbonate ions would preferentially combine with the metal cations which would make the
most insoluble compound. Given the solubility products, CoCO3 would first precipitate, then ZnCO3 and then Cu2CO3(OH)2. Won't this work? Is there a
better option for separating the metals?
[Edited on 13-3-2018 by CobaltChloride]
[Edited on 13-3-2018 by CobaltChloride]
|
|
walruslover69
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 228
Registered: 21-12-2017
Member Is Offline
Mood: No Mood
|
|
how are you going to know when you are done precipitating copper and only have Nickel left in solution?
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
I know the exact composition of the coins. I also know their mass. Thus I can easily calculate how much copper II nitrate is in solution, so I can
calculate how much sodium carbonate I need for the reaction.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Did you use an excess of acid when dissolving the coin?
Did any evaporate?
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
All of this is still theoretical as I don't want to waste nitric acid without being sure that this is a good method. In any case, I plan to use as
much as is needed to dissolve the coin, which would probably be more than stoichiometrically necessary as some is bound to decompose/evaporate. I know
that the excess will also react with sodium carbonate, so I plan to leave the solution to dry and then redissolve the salt mixture.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
You might want to search the site for copper aspirinate.
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Ok, but do you know if nickel aspirinate isn't insoluble as well? I would try it on a small scale, but I don't have any nickel beside the one from the
coins, but those are huge and melting one to make small beads isn't an option.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
I think it's been made clear in the thread that we've tried making nickel aspirinate, and haven't gotten any precipitate. And trying these things on
a small scale is easy- take your solution, and add aspirin to only a small aliquot of it.
That being said, I've had mixed results with making copper(II) aspirinate at the best of times....
The classic way of separating nickel and copper is with sulphide in acidic solution, but you've have to have a good fume hood for that- copper(II)
sulphide will precipitate out, while nickel sulphide will only precipitate from a neutral solution.
Alternatively, you could reduce the copper and precipitate it as copper(I) iodide.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Quote: Originally posted by DraconicAcid ![](images/xpblue/lastpost.gif) | I think it's been made clear in the thread that we've tried making nickel aspirinate, and haven't gotten any precipitate. And trying these things on
a small scale is easy- take your solution, and add aspirin to only a small aliquot of it.
That being said, I've had mixed results with making copper(II) aspirinate at the best of times....
The classic way of separating nickel and copper is with sulphide in acidic solution, but you've have to have a good fume hood for that- copper(II)
sulphide will precipitate out, while nickel sulphide will only precipitate from a neutral solution.
Alternatively, you could reduce the copper and precipitate it as copper(I) iodide.
|
I didn't have time to search through all those pages to see that you didn't get a precipitate with Ni II. The idea of using a soluble iodide is great!
Thanks for the help!
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
And if the cost of iodide is a problem, you can probably reduce it with sulphite in the presence of bromide or even chloride, as these will also give
insoluble copper(I) compounds (while nickel won't be reduced or precipitate).
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
If you want to get Ni out of coins that only have 5% of it, you are better off switching coins. Try foreign ones that have higher nickel content. Some
issues are pretty much pure nickel.
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
For pure nickel I bought these https://www.ebay.co.uk/itm/Pure-Nickel-99-96-Low-Resistance-...
easy shape to dissolve or use as a small electrode.
Getting the 5% anything from an OTC source is worth doing at least once to develop skills.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Foeskes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
I have come up with 1 method for separating Cu and Ni, but it's impractical basically copper sulfate decomposes at around 500 C and nickel sulfate is
way over that so if you heat it around 500-600 C for a while you should get soluble (anhydrous) nickel sulfate and insoluble copper oxide. This is
dangerous and you need good gas scrubbing(the decomposition releases SO3), maybe you can make oleum?
Note: I have not tried this method yet.
[Edited on 15-3-2018 by Foeskes]
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
I posted, long ago, a method for separating Ni and Cu derived from cupronickel coins. If there is also Zn, precipitating it out selectively as ZnO2
under oxidizing conditions should be straightforward.
Or you can go the electrowinning route, if you've got the gear.
Some old, yet still abundant, Canadian coins are 99%+ Ni. I'd just go there.
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Quote: Originally posted by Foeskes ![](images/xpblue/lastpost.gif) | I have come up with 1 method for separating Cu and Ni, but it's impractical basically copper sulfate decomposes at around 500 C and nickel sulfate is
way over that so if you heat it around 500-600 C for a while you should get soluble (anhydrous) nickel sulfate and insoluble copper oxide. This is
dangerous and you need good gas scrubbing(the decomposition releases SO3), maybe you can make oleum?
Note: I have not tried this method yet.
[Edited on 15-3-2018 by Foeskes] |
Just wanted to let you know that I did the decomposition of copper sulfate in a school setting and it produced SO2 and O2, but no SO3. I think this is
because there is some sort of temperature-dependent equilibrium between SO3 and SO2+O2 and it is very hard to control the temperature sufficiently so
that SO3 is the main gaseous product.
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Quote: Originally posted by PirateDocBrown ![](images/xpblue/lastpost.gif) | I posted, long ago, a method for separating Ni and Cu derived from cupronickel coins. If there is also Zn, precipitating it out selectively as ZnO2
under oxidizing conditions should be straightforward.
Or you can go the electrowinning route, if you've got the gear.
Some old, yet still abundant, Canadian coins are 99%+ Ni. I'd just go there. |
I think it is easier to use the aforementioned method to separate zinc by means of its soluble complex with sodium hydroxide as the reagent is
cheaper.
As for going to Canada, that's not an option. Nor is electrowinning because I don't have a variable DC power supply.
[Edited on 15-3-2018 by CobaltChloride]
|
|
fusso
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
@CoCl2 No wonder you want to separate metals from that specific compo. I googled about coins in ur country and found out ur coins only have that
compo, other than sth plated on steel.
[Edited on 6/4/18 by fukko]
|
|