weilawei
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
Ammonium Tetrachroloroaurate (Water Soluble Noble Metals)
There's a fascinating (and seemingly easy to reproduce) post at In The Pipeline about making a water soluble solution of gold and other noble metals.
Quote: | The group shows that if you take one of these metals (powder, wire, what have you) and mechanically mill it with either potassium chloride or ammonium
chloride along with the weak oxidant Oxone (potassium peroxymonosulfate), all as powders, you get a powder at the end that completely dissolves in
water. That’s a startling thought to a chemist, grinding up palladium powder or gold wire and having it form just a clear colored solution at the
end. That solution contains ammonium tetrachloroaurate (or the corresponding other salts), which is already a known soluble compound, of course –
it’s just that in the past, if you wanted your gold in that form, you had to sort of go all the way around the barn to get it. If you add other
ligands to the grinding mixture, you can form triphenylphosphine complexes and many others directly. |
There's also a bonus round about ball milling cellulose to achieve better yields of glucose.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
So it's a solid-solid reaction? Interesting. Is the yield theoretical, or is there some leftover of any of the compounds at the end?
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
The Austrian Scientist
Harmless
Posts: 30
Registered: 1-1-2018
Location: Austria
Member Is Offline
Mood: Analytical
|
|
Will it also work for Pt or Ir?
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
For Gold recovery this would not be as good as cyanide.
Very interesting is the bit about "surface atoms are very different from those in the bulk phase"
Perhaps that difference is why some calcined substances are almost inert.
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
I mean if dry milling ammonium chloride with gadolinium oxide gives some soluble GdCl3 then I don't see why this wouldn't work.
I wouldn't call oxone a weak oxidant. Probably in situ chlorine generation doing the work?
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Quote: Originally posted by Fleaker ![](images/xpblue/lastpost.gif) | I mean if dry milling ammonium chloride with gadolinium oxide gives some soluble GdCl3 then I don't see why this wouldn't work.
I wouldn't call oxone a weak oxidant. Probably in situ chlorine generation doing the work? |
The reaction would be
Gd2O3 + 6 NH4Cl -> GdCl3 + 6 NH3 + 3 H2O
since the NH3 is volatile, the reaction goes forward.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
You don't need to postulate in-situ generation of chlorine to explain the reactivity of gold towards aqua regia- the chloride ion stabilizes the
gold(III) ion via coordination, making it easier to form.
If you argue that the nitrate ion in aqua regia isn't strong enough to oxidize gold, then you also have to accept that it isn't strong enough to
oxidize chloride ion to chlorine.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
I think oxone could certainly oxidize gold on contact. Persulfate in water oxidizes Ag+ to Ag2+ which is a similarly difficult oxidation.
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
Quote: Originally posted by vmelkon ![](images/xpblue/lastpost.gif) | Quote: Originally posted by Fleaker ![](images/xpblue/lastpost.gif) | I mean if dry milling ammonium chloride with gadolinium oxide gives some soluble GdCl3 then I don't see why this wouldn't work.
I wouldn't call oxone a weak oxidant. Probably in situ chlorine generation doing the work? |
The reaction would be
Gd2O3 + 6 NH4Cl -> GdCl3 + 6 NH3 + 3 H2O
since the NH3 is volatile, the reaction goes forward. |
Yes, this (dry way) reaction is very well known to people working with rare earths. I have done this before in a ball mill with alumina media. When
the mill is opened, there is an odor of ammonia that can be smelled. However, in my experience the reaction never goes to completion even with
hardened steel media that have much more kinetic energy. In my case, I was working with Gd2Zr2O7, not pure Gd2O3, though I can confirm that it works
for Nd, Y, Yb, Gd (produced from the aforementioned) in my experience. To get high yields, I have always had to prepare the rare earth chlorides in
porcelain or pyroceram boats, covered over, at about 450 C for 5-6 h. This is generally effective, even on well calcined REO. At that temperature
though, a lot of HCl is produced.
Quote: Originally posted by DraconicAcid ![](images/xpblue/lastpost.gif) |
You don't need to postulate in-situ generation of chlorine to explain the reactivity of gold towards aqua regia- the chloride ion stabilizes the
gold(III) ion via coordination, making it easier to form.
If you argue that the nitrate ion in aqua regia isn't strong enough to oxidize gold, then you also have to accept that it isn't strong enough to
oxidize chloride ion to chlorine. |
I am confused by this post. Are you talking "you" as in me? Who is talking about aqua regia, let alone arguing about it? Draconic,
I'm postulating that my talking apples to oranges by comparing ball milling REOs with ammonium chloride versus a bona fide redox reaction upset you.
Nevertheless, I do think some formation of chlorine is happening in this system. I was just asking if other people thought so as well. Do you think
this is possible?
There are a lot of things going on with aqua regia mixtures--be it NOCl, NO, NO2, Cl2. But yes, it takes a coordinating ion for
stable gold solutions. For instance, dissolved "gold nitrate" stable in red fuming nitric acid immediately hydrolyzes upon dilution.
The powder (maybe Au2O3, which isn't exactly the strongest base!) that is obtained melts to gold metal. I never had the opportunity to see how much
oxygen is produced from its decomposition.
One of the issues in removing gold from materials that can be passivated by nitric acid (i.e. gold plated stainless steel) with reverse aqua regia is
that as the mixture ages, eventually the gold precipitates as the solution loses chlorine. The complex is not forever stable despite how well put
together [AuCl4]- is. It takes many months depending on temperature so indeed even the chloride bound in that complex will be oxidized over time.
Odd thing though, if I reflux silver chloride with azeotropic nitric acid for days and days and take a sample to the ICP-OES, I don't have much in the
way of silver reporting as its soluble nitrate and I don't end up with an aqua regia solution. Chlorine is effectively trapped in that system as any
chlorine formed simply doesn't have time to escape the solution before recombinaton with Ag+. On the other hand, one can surely convert AgCl to
soluble Ag2SO4 by fuming with sulfuric--with HCl sent off. Funny thing is that when the same silver chloride is put it in a quartz flask and
illuminated with UV, it gives chlorine water and silver metal. Not quite completely, but it does.
In my experience, peroxymonosulfuric acid will oxidize gold. It is not a stable situation and the gold is soon thrown down as a blackish brown solid
that maybe is a mixture of oxide and metal. Maybe all metal. I never looked to see. Gold plated copper items are often stripped of their gold content
by electrolysis in hot, concentrated sulfuric acid.
Whether persulfate salts can do this with no complexing ligand present... I do not know but I think it very unlikely to put Au into solution in
quantity. I can simply take a piece of gold, weigh it, and toss it in a strong persulfate solution. Any mass loss wouldn't be easily measured, I'd
imagine. Now persulfate with HCl, you are going to have gold dissolve. I can give this a go, if you'd like.
I think in reality, oxone is probably substitutable for nitrate, chlorate, and so on. Even air dissolved in HCl will attack the PGM blacks.
My interest in this process is from a practical standpoint--why use aqua regia or HCl-Cl2 or HBr/Br2 to dissolve something if it can be accomplished
simply and cheaply useing KCl and oxone while ball milling the living hell out of it for a couple weeks?
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|