weilawei
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
Vacuum Pump Foibles
I recently purchased a quite nice and proper rotary vane pump after years of lusting after one (and saving up for the enormous sticker shock). Now,
I'm testing it out, but I've run into some unexpected issues: namely, my heavy wall Tygon tubing collapses under full vacuum. Now, I added a gas inlet
(and have H2O boiling at 35 C), but I can still only pull down to ~43 Torr at the apparatus. The pump is capable of pulling 13 millitorr, but I can't
run it wide open. Should I redo my foreline in steel, or is there any better way to get the vacuum down lower without buying steel vacuum tubing? I'm
considering a KF25 steel pipe with the hose barb directly hooked to the cow via 2 inches of Tygon to make a glass barb to metal barb seal.
EDIT: At the pump, one gage reads 25 Torr, and another reads 4.3 Torr (the number given above is calculated from the BP). Also, in the setup, there's
no cold trap, but the condenser seems to work quite well, and I'm running it with a gas ballast to avoid condensation in the pump. I do have a cold
trap, but it's not hooked up due to needing a CO2 tank for dry ice (also limiting my use to basic testing at the moment).
[Edited on 3-12-2017 by weilawei]
![20171203_152656.jpg - 1.6MB](http://www.sciencemadness.org/talk/files.php?pid=499310&aid=63025)
[Edited on 3-12-2017 by weilawei]
[Edited on 3-12-2017 by weilawei]
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
You can get heavy duty vac tubing, i dont always use a cold trap. But i do always try and use a wash bottle for acids, i change my oil with compressor
oil roughly every 6 weeks depending on use, its really cheap from some places.
Also sometimes i use a wash bottle filled with engine oil, i figure most the crap will get caught in that. But changing the oil often is your best
bet.
|
|
weilawei
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
It seems I purchased Tygon with a 7/16" OD instead of 7/8". There's quite a difference in price--and performance, it would seem. North of $10/ft! I'll
look into ordering some after the holidays, and hopefully that will solve my issue. I should be good down to 1 Torr (it says it's rated for 759 mm Hg
max. vacuum.).
[Edited on 4-12-2017 by weilawei]
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
You can get full vacuum hose at Carolina Biological.
That's a beautiful pump. What kind is it and what price?
I want a sign like you have.
[Edited on 4-12-2017 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
It's a pity that they don't make this stuff a bit bigger bore
https://www.johnlewis.com/john-lewis-curtain-wire-kit-with-h...
|
|
weilawei
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
I bought the sign at a halloween store, but you can order one from Target.
The pump, a 2015 Adixen 2021i, was (brace yourself) $850 rebuilt (before freight) and came with an automatic gas ballast, but did not include any
other fittings. I purchased everything else separately. The entire setup, gages, OME, fittings, tubing, oil, cold trap, dewar, dry ice maker and all
odds and ends, ran about $1500 total cost. Some people buy fancy new computers... I bought a pump. I work a stupid amount of overtime 60-70 hours a
week to afford it.
Thanks for all the suggestions on tubing! I'll check those out.
[Edited on 5-12-2017 by weilawei]
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Ouch. Sorry, but that sounds like a ridiculous amount to spend on a pump, and I'm saying that from the perspective of someone who spends an
unhealthily large chunk of his income on lab supplies. I bought a used rotovap for much less than that, and use a $30 single-stage rotary vane pump
from Amazon with it (boils water off nice and fast at about 55ÂșC). Why do you need such an expensive pump?
|
|
Chemvironment
Harmless
Posts: 23
Registered: 1-10-2017
Member Is Offline
Mood: No Mood
|
|
Does anyone else find the humor in "skimping" on vac hose after dropping $1500 for the set up? Awesome pump in any case. Your next purchase should be
some lab jacks. Those books look precarious at best.
[Edited on 5-12-2017 by Chemvironment]
|
|
weilawei
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
Eventually? To back a GC/MS. How often do we have questions about products produced and purity? All too often for trying to do science as opposed to
demonstrations. And hopefully, I can make that available to others.
As to skimping, that was more mistake than skimping. I purchased the wrong wall thickness tubing. My shock at tubing price is the enormous difference
in price for the same exact material and manufacturer for a slight difference in thickness.
To each their own. I'd rather buy it once and maintain it and have it last my lifetime. I'm certainly not interested in pumping all sorts of crud
through it. That's what a cheap HVAC pump is for or an aspirator.
Why buy a gaming PC (or other effectively disposable item) that will be outdated in a year? To accomplish what? This falls under long-term purchases.
[Edited on 5-12-2017 by weilawei]
|
|