pneumatician
Hazard to Others
Posts: 412
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
Distilling adapters, 75 Bend 45/40 to 24/40
hallo,
I need a Distilling adapter, 75 Bend 45/40 in a end to 24/40 in the other or 45/40 in a mouth to 29/32 in the other
someone see this? it exists?
|
|
|
Sulaiman
International Hazard
Posts: 3723
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
You could start with a reducer on the 45/40 e.g. http://www.ebay.co.uk/itm/Reducing-Piece-Kern-on-Shell-w-050...
(not the cheapest, just an example of choices)
then use a common 24/40 still head adapter ?
The reducing adapter could also be used for refluxing etc. so it seems a useful bit of kit in your case.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Dr.Bob
International Hazard
Posts: 2751
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have never seen quite that combination. I do have some adapters and some distillation heads, but still am not quite sure what you want. Is the
rbf a 45/50 and your condenser is 24/40? Or 29/32? I have lots of 29/42 adapters which is the longer verion of that size.
|
|
|
pneumatician
Hazard to Others
Posts: 412
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
hi,
yes the rbf is 45/40 and condensers are 24/40 or 29/32
I want one of this with a 45/40 and the other 24/40 or 29/32.
http://www.ebay.ie/itm/Recovery-Bend-Adapter-elbow-24-29-75-...
I check many times over the years some glassware suppliers and ebays and never see this combo, but until now I never used rbf with 45/40, now for a
project I need this combo, the distillate is very hard to ascend and if more temp more burning of the mater and I want to avoid this at maximum.
Adapters are a barrier, a problem...
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
