alittlebitcrazy
Harmless
Posts: 7
Registered: 29-9-2017
Member Is Offline
Mood: No Mood
|
|
making palladium on carbon
i am reading about making palladium on carbon, the procedure doesn't seem complicated(at least in terms of the ingredients you need) at first but it
looks like i need an "acid washed" activated carbon or to take a "regular" activated carbon and heated it with 10% nitric acid for 2 hours but i realy
don't want to mess with nitric acid, not just because it is hard to make but also cause the ingredients for nitric acid are probably under strict
regulations and can put anybody who buys them in somekind of blacklist and get marked by the police as potential terrorist.
so there is a way to make palladium on carbon without nitric acid? mybe another way to make "acid washed activated carbon" with some different kind of
acid?
|
|
Vosoryx
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
I'm not sure how to answer your actual question, but Nitric acid synth is very easy, and the ingredients required to do so are very easily accessible,
should you know where to look. (By chance, i'm actually distilling some HNO3 right now.)
I don't know how strict the conditions are where you live, but even if you can't find any nitrate salt/sulphuric acid based drain opener where you
live, ordering them online should not raise any eyebrows by the cops.
For nitrate salts:
Some instant cold packs contain ammonium nitrate. If it says calcium ammonium nitrate, you have to recrystallize it.
Potassium nitrate is usually sold in home and garden stores as stump remover.
Sodium nitrate can occasionally be found in fertilizers. A rather niche source, but mine, is from aquaculture companies.
Even if you can't find them, searching online for instant cold packs on amazon reveals a box where the label clearly says "Contains ammonium nitrate"
The same goes for drain opener.
Though the shipping costs might be expensive, try to look it up anyway.
Sorry I can't help with the alternative routes for Pd/C, I'm just not a good enough chemist, but there are people who could tell you if that is
possible on this site. Good luck!
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
I'm pretty sure the main reason for using nitric acid is because it's a strong acidic oxidizer that won't leave sulfur, halides, or transition metals
behind. You could try base piranha (aqueous ammonia and hydrogen peroxide, heated to about 70C) then wash a few times with an aqueous solution of a
strong organic acid like formic acid or oxalic acid. The point is, you want the carbon partially oxidized so that it has sites on it that act as
ligands for the palladium. Base piranha should do this, except there will be amide rather than acid groups left behind. So then you need an
acid to cleave as many amides as possible, that won't leave behind some potentially reaction-poisoning element.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
Morgan
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1675
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
I wonder if corona discharge would be of any use for the palladium-on-carbon process - corona discharge a method used on some plastics to make dyes
adhere to them?
http://www.scielo.br/scielo.php?script=sci_arttext&pid=S...
As an aside on dyes, yesterday at a farm type store, there was this funny blue dye I that's used to color ponds I happened across. How strange.
Ingredients: Acid Blue # 9 - 25.9 %, Inert and proprietary ingredients - 74.0 %
"This ingredient is safe for humans, fish, livestock, pets, birds, reptiles and nearby irrigation systems. Please refer to label for instructions
prior to use."
http://www.agrisupply.com/crystal-blue-lake-and-pond-coloran...
|
|
alittlebitcrazy
Harmless
Posts: 7
Registered: 29-9-2017
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Melgar ![](images/xpblue/lastpost.gif) | I'm pretty sure the main reason for using nitric acid is because it's a strong acidic oxidizer that won't leave sulfur, halides, or transition metals
behind. You could try base piranha (aqueous ammonia and hydrogen peroxide, heated to about 70C) then wash a few times with an aqueous solution of a
strong organic acid like formic acid or oxalic acid. The point is, you want the carbon partially oxidized so that it has sites on it that act as
ligands for the palladium. Base piranha should do this, except there will be amide rather than acid groups left behind. So then you need an
acid to cleave as many amides as possible, that won't leave behind some potentially reaction-poisoning element. |
the base piranha isn't the mixture used to bleach hair and making it blonde? or it is a more concentrated version?.
and for the organic acid, dose citric acid can be used?.
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Hair bleaching uses a mixture of persulfate and peroxide, usually with ammonium as a spectator ion. I think this might actually make singlet oxygen or
something.
Base piranha uses ammonia as an actual base. This makes the peroxide more reactive, IIRC.
Ammonia is smelly and it's a gas. Ammonium is basically odorless and its salts are solids.
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
A poor (or wise) man's nitric acid substitute may be Al(NO3)3. Here are some Wikipedia comments (link: https://en.wikipedia.org/wiki/Aluminium_nitrate):
"Aluminium nitrate is a strong oxidizing agent. It is used in tanning leather, antiperspirants, corrosion inhibitors, extraction of uranium, petroleum
refining, and as a nitrating agent."
"Aluminium nitrate may also be prepared a metathesis reaction between aluminium sulfate and a nitrate salt with a suitable cation such as barium,
strontium, calcium, silver, or lead. e.g. Al2(SO4)3 + 3Ba(NO3)2 → 2Al(NO3)3 + 3BaSO4 "
I have been trying to prepare it recently. My intended reaction was:
Al2(SO4)3 + 6 KNO3 → 2 Al(NO3)3 + 3 K2SO4
where I would freeze out the K2SO4.
The problem I experienced was in preparing Al2(SO4)3, by the action of NaHSO4 on Al(OH)3. I have learned that I need a very fresh Al(OH)3 precipitate,
otherwise only concentrated acids will react with old Al(OH)3.
[Edited on 30-9-2017 by AJKOER]
|
|
Assured Fish
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 319
Registered: 31-8-2015
Location: Noo Z Land
Member Is Offline
Mood: Misanthropic
|
|
This is an interesting topic, however i find it odd that the OP is unable to get his hands on nitric acid, its even more odd that the entire thread
has wondered away from actually impregnating palladium onto carbon and has instead chosen to focus on the rather trivial aspect of cleaning the carbon
of potential catalyst poisons.
@alittlebitcrazy If you are unable to prepare your own nitric acid due to a lack of glassware, then how the hell do you intend to use Pd/C for any
hydrogenations?
Im not mocking the persuit of somewhat pointless (for lack of a better word) chemistry for the sake of alternatives.
Its just odd the way in which you have structured your post.
Again the idea is great, my skepticism is in whether the OP knows enough about chemistry to pull off such an experiment and then what the OP intends
to do with the Pd/C.
Anyhow from what ive read of the only sources i have access to at present, the general route involves adding palladium chloride dissolved in HCl to
acid washed activated carbon on an ice bath. Then or before adding the carbon, formaldehyde is then added.
This is then stirred at 0*C and then aqueous KOH or NaOH is added followed by heating and then of coarse filtration and washing.
What i want to know, is what is the mechanism thats going on here, what role does the formaldehyde take in this reaction and what bonds are formed in
the final product e.g. is there a palladium carbon bond formed at all, or is it just a suspension of sorts?
https://en.wikipedia.org/wiki/Catalyst_poisoning
https://erowid.org/archive/rhodium/chemistry/pd-catalyst.faq...
https://en.wikipedia.org/wiki/Palladium_on_carbon
|
|
UC235
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 565
Registered: 28-12-2014
Member Is Offline
Mood: No Mood
|
|
Useful reference: http://orgsyn.org/Content/pdfs/procedures/cv3p0685.pdf
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Actually, since you're adding PdCl2 anyway, you should be able to use hydrochloric acid. That would definitely be your best option.
Quote: | What i want to know, is what is the mechanism thats going on here, what role does the formaldehyde take in this reaction and what bonds are formed in
the final product e.g. is there a palladium carbon bond formed at all, or is it just a suspension of sorts? |
The formaldehyde is a reducing agent, that reduces the palladium to its metallic state. I've heard of formic acid being used for this too. It may
also serve the purpose of binding the carbon particles together in loose clumps so that they're able to be filtered more easily.
The palladium is in its metallic state, but in very small particles. The acidic sites grab onto metal particles as they form, and prevent the
particles from growing as large in size as they might have otherwise. The parallel that I'm familiar with is making gold nanoparticles, where citric
acid plays a similar role:
https://en.wikipedia.org/wiki/Colloidal_gold
edit: The substance that limits the particle size is referred to as a "capping agent".
[Edited on 10/1/17 by Melgar]
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
alittlebitcrazy
Harmless
Posts: 7
Registered: 29-9-2017
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Assured Fish ![](images/xpblue/lastpost.gif) | This is an interesting topic, however i find it odd that the OP is unable to get his hands on nitric acid, its even more odd that the entire thread
has wondered away from actually impregnating palladium onto carbon and has instead chosen to focus on the rather trivial aspect of cleaning the carbon
of potential catalyst poisons.
@alittlebitcrazy If you are unable to prepare your own nitric acid due to a lack of glassware, then how the hell do you intend to use Pd/C for any
hydrogenations?
Im not mocking the persuit of somewhat pointless (for lack of a better word) chemistry for the sake of alternatives.
Its just odd the way in which you have structured your post.
Again the idea is great, my skepticism is in whether the OP knows enough about chemistry to pull off such an experiment and then what the OP intends
to do with the Pd/C.
Anyhow from what ive read of the only sources i have access to at present, the general route involves adding palladium chloride dissolved in HCl to
acid washed activated carbon on an ice bath. Then or before adding the carbon, formaldehyde is then added.
This is then stirred at 0*C and then aqueous KOH or NaOH is added followed by heating and then of coarse filtration and washing.
What i want to know, is what is the mechanism thats going on here, what role does the formaldehyde take in this reaction and what bonds are formed in
the final product e.g. is there a palladium carbon bond formed at all, or is it just a suspension of sorts?
https://en.wikipedia.org/wiki/Catalyst_poisoning
https://erowid.org/archive/rhodium/chemistry/pd-catalyst.faq...
https://en.wikipedia.org/wiki/Palladium_on_carbon |
i am asking particulary about that "acid washed" cause i keep getting into this in every guide i readed about making Pd/C. and for the nitric acid, i
don't have much knowledge in chemistry but i know in general(but didn't actualy tried it) that nitric acid can be made from nitrate salts and acids
but i am affraid that gov/police in where i live(i won't say it here) are monitoring people who buy nitrates. i know it sounds paranoidic but this is
also the main reason why i don't just buy Pd/C on the internet(i already found where to buy it and planned to do it before thinking about how it can
look suspicious) ammonia solution and hydrogen peroxide are less suspicious.
but you right about me focusing only on this, i should also ask about the guide i found on making palladium on carbon(i think it was erowid site):
"Palladium on Carbon (5% Pd/C) [1]
Prepare a solution of 1.7 g of Palladium Chloride (or an equimolar amount of palladium chloride dihydrate, PdCl2*2H2O)
in 1.7 ml of concentrated hydrochloric acid and 20 ml of water by heating on a water bath for 2 hours or until solution is complete, and add this to a
solution of 30 g of sodium acetate trihydrate (Note 1) in 200 ml of water contained in a 500 ml hydrogenation flask.
Add 20 g of acid washed activated charcoal (Note 2) and hydrogenate in an atmospheric hydrogenation apparatus until absorption ceases. Collect the
catalyst on a buchner funnel and wash it with five 100 ml portions of water and suck dry as possible.
Dry the catalyst at room temperature over potassium hydroxide pellets or anhydrous calcium chloride in a vacuum dessicator. Powder the catalyst
(approx 20 g yield) and store in a tightly stoppered glass bottle."
would it work?
|
|
alittlebitcrazy
Harmless
Posts: 7
Registered: 29-9-2017
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Melgar ![](images/xpblue/lastpost.gif) |
Actually, since you're adding PdCl2 anyway, you should be able to use hydrochloric acid. That would definitely be your best option.
[Edited on 10/1/17 by Melgar] |
you mean washing the activated carbon with hydrochloric acid after washing it with base piranha right?. thanks for the help (:
[Edited on 1-10-2017 by alittlebitcrazy]
[Edited on 1-10-2017 by alittlebitcrazy]
|
|