MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Estimated VOD
Can anyone give me an estimate VOD off of this witness plate test. I am testing a new primary explosive!
1 gram was compacted in a graphite arrow tube 5mm ID
The witness plate is 3mm Al, it was covered with 5cm of sand and places vertical... so the sand was not acting as a tamper!
It shot sand crystals into the aluminum plate, they are embedded deep and cannot be scraped out with a razor blade. Flash powder does no such thing
to this plate and its VOD is 1600m/s
Would SADS and LA do more or less damage?? I really need to know this
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
The right side of the first picture is where the explosive was, the left side was flashpowder to ignite it and the same explosive but not pressed.
[Edited on 29-4-2017 by MineMan]
|
|
NeonPulse
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 417
Registered: 29-6-2013
Location: The other end of the internet.
Member Is Offline
Mood: Isolated from Reality! For Real this time....
|
|
Speak to Dornier335A. He has developed software which if given a set of parameters including the molecular makeup and density he can calculate a VOD ,
oxygen balance and the suspected decomposition products. He may be kind enough to help you if you had the right info. Certainly lead azide pressed
in a 1g quantity would blow a hole through 3mm aluminium plate.
I'm not so sure that SADS would do that but it would likely leave a fracture in the plate. May I ask what your compound is that you are testing? What
is it based on?
|
|
Laboratory of Liptakov
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1367
Registered: 2-9-2014
Location: Technion Haifa
Member Is Offline
Mood: old jew
|
|
Some is here. http://www.sciencemadness.org/talk/viewthread.php?tid=17695&...
But generally is always tested forehead of shockwave, not planar from side. I never seen professional or relevant measurements, put charge from some
side. Always from forehead, perpendicular. And measurement hole, plate dent, impact depth. And always is necessary before measurement xy EM making
measurement on same material with known properties, for example cast ETN = 8100m/s. And his depth in relevant material. At maximum density (and known
VoD-GPa) and low density (1,0g/cm3) with known properties (VoD - GPa) After is possible interpolation between depth of both impacts. After this is
possible kicking xy (again max density and low density 1,0g/cm3) and to graph writte for his.
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
PHILOU Zrealone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
The scratches may come from the sand or from the graphite arrow... what is in fact nano-carbon fibers = nano-tubes wich are somehow as hard as
diamond....so at high speed nano-tubes of carbon will easily scratch the Aluminium surface.
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
Dornier 335A
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 10-5-2013
Location: Northern Europe
Member Is Offline
Mood: No Mood
|
|
I agree with Liptakov, it is important to test it perpendicular to the witness plate. Then the shock wave slams straight into the witness plate. If
the shock wave instead travels parallel to the surface, only the expanding gases behind it can do work against the plate. It's also much easier to
compare round dents or holes.
Regarding my software, it won't give reliable results for inhomogeneous mixtures so I suspect it is less useful here.
|
|
Laboratory of Liptakov
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1367
Registered: 2-9-2014
Location: Technion Haifa
Member Is Offline
Mood: old jew
|
|
Best useful is watching and compare mechanical damage some plate. Because is it clearly and accordingly shape of damage is easy determine all energy
and hard grade of energy. For later using, for example as primary kick, in frame original question. From "side " energy is almost impossible any say
how was VoD or pressure in GPa.
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
I cannot say what this compound is, I have only shared the composition with dornier. But I can say that it requires no synthesis, and it is immune to
static, flame and friction. A sharp hammer blow will set some of material off. It is an invention of mine, and there are hardly any scientific papers
or journals that refer to compounds such as this. I can say a little more if you PM me.
You are probably thinking how a primary explosive can be immune to static and flame... it is because it self extinguishes itself. But when confined
it detonates!
[Edited on 2-5-2017 by MineMan]
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by PHILOU Zrealone ![](images/xpblue/lastpost.gif) | The scratches may come from the sand or from the graphite arrow... what is in fact nano-carbon fibers = nano-tubes wich are somehow as hard as
diamond....so at high speed nano-tubes of carbon will easily scratch the Aluminium surface. |
The scratches come from the sand, it was detonated in a bucket filled with sand. I have done a hundred tests this way...
flash powder for example barley has the gurney velocity to make the sand particles scratch this plate. But my new formula does.
|
|
Laboratory of Liptakov
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1367
Registered: 2-9-2014
Location: Technion Haifa
Member Is Offline
Mood: old jew
|
|
Huuh...I am curious...new primary ? Holy grail of amateur deminers ? A new substance ? Relatively safety ? Detonatable only in closure ? Not poisoned
? Some better than tetraamine copper perchlorate - hexamine clathrate - CHP ? Impossible....:-)
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Sorry LL.. it might be true! In fact I have detonated TACP and ANNMAL mixtures with it. You see, it is not like a regular primary...it seems
impossible to you that it could not burn in the open but it could ddt confined... it is very unique. Its sensitivity to impact depending on the
formulation is about that of CHP or PETN... but it is immune to friction, static, and exposures of flame for less than 1.5 second.
Holy grail of armatures... yes, but i am hoping to write a patent, nobody likes lead azide! Oh and cheap... I can produce it for less than $30 per
pound... although i never mix more than a few grams. Industry could make it for $10 a pound or less.
|
|
PHILOU Zrealone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Quote: Originally posted by MineMan ![](images/xpblue/lastpost.gif) | Sorry LL.. it might be true! In fact I have detonated TACP and ANNMAL mixtures with it. You see, it is not like a regular primary...it seems
impossible to you that it could not burn in the open but it could ddt confined... it is very unique. Its sensitivity to impact depending on the
formulation is about that of CHP or PETN... but it is immune to friction, static, and exposures of flame for less than 1.5 second.
Holy grail of armatures... yes, but i am hoping to write a patent, nobody likes lead azide! Oh and cheap... I can produce it for less than $30 per
pound... although i never mix more than a few grams. Industry could make it for $10 a pound or less. |
If you mixed only a few grams...you can't be sure of the real troubles for industrial plant...many things are safe when made into minute amount but
reveals their danger of explosion when it comes to industrial scaling-up and handling... it was the case with NH4NO3, Nitromethane, double base or
single base powders, black powder, suggar crystallisation process and atomisation, flour, ...
For example that unsensitive powder may become self confined and thus acheive D2D into 20g, 100g, 500g, 1 kg, a tonn amount ... by triboelectricity,
static electricity or hot spot...
This will need further development and study for industry but of course 10-30 US $ a pound is nice. and even if semi industrial it will definitely
change part of the world's face ;-)
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Thank you... your right, in large amounts it would a be, I will be in the other room lol. But its better than lead azide.
|
|