CaptainPike
Hazard to Self
Posts: 68
Registered: 21-12-2012
Member Is Offline
Mood: No Mood
|
|
unexpected biphasic mother liquor
After re-crystallizing some beta nitro styrenes, using petroleum ether (hardware store naphtha) the remaining cold solvent and washes were left
several days. This morning I notice a second phase has separated out.
This solvent boils in the high 90s and may have caused some degradation to the solvated nitro styrene. Could this oxidation have produced some
insoluble liquid– like water? I know there's not much to go on. The "two upper phases" are actually an illusion – the dirty dark layer is just a
reflection of something yellow – maybe the goo the bottom, refracted. There is a nearly clear layer, about a centimeter thick, on top of the dark
syrup on the bottom.
I'll try to include a nice image of the first recrystallized product. We used (up all my) ethanol, and they came out nice reddish, long needles.
|
|
Crowfjord
Hazard to Others
Posts: 390
Registered: 20-1-2013
Location: Pacific Northwest
Member Is Offline
Mood: Ever so slowly crystallizing...
|
|
I'm a little confused as to what you mean, where the ethanol and naphtha are concerned. Was the naphtha used to extract the nitrostyrene, which then
crystallized from the naphtha? And then alcohol was used to recrystallize the nitrostyrene? I would guess that if you extracted from an aqueous
solution, maybe that bit that was dissolved in the naphtha (with alcohol maybe?) slowly came out. There isn't much to go on.
That's an interesting color for a nitrostyrene. They are usually yellow or orange, except for the base form of the phenolic nitrostyrenes, which are
red. I suppose it has some strong electron-donating group at the 4-position.
|
|
CaptainPike
Hazard to Self
Posts: 68
Registered: 21-12-2012
Member Is Offline
Mood: No Mood
|
|
Sorry for the confusion. See the "Cold Method" preparation by garage chemist, where I got the basic idea.
There is no aqueous extraction, as such.
In the second part of the prep, where the ivory colored slurry is added to cold hydrochloric acid, orangey material appears.
I can't remember now – we first recrystallized with ethanol (yielding red filtrate and crystals), and then maybe the large bulk of material
remaining in the filter was recrystallized again, this time in the higher boiling naphtha. This produced the more yellow crystals when the filtrate
was cooled down.
|
|