MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Combined Effects Explosives
All,
I have heard a lot of folks bash the addition of aluminum powder for added energy because it does not react along the detonation wave...
Please see the attached presentations, they are very interesting and show that properly sized, the Al or Si powder can contribute to the Gurney
velocity, and of course greatly increases the energy. The trick is that an energetic plasticizer must be used, not an inert plasticizer. I have
tried Si in ANNM mixtures, it seems to be less sensitive than ANNMAL. One advantage of silicon is it is brittle, making milling easier. I have
thought of pushing the use of silicon for commercial explosives, but Al is still a little cheaper...
http://www.dtic.mil/ndia/2012IMEM/13890anderson10B.pdf
Also, the addition of Al between 10-30% increases the duration of the peak detonation pressure several fold... I know for blasting that even a few
more miliseconds of pressure makes a large difference, hence why a proper amount of clean crushed stemming is used.
Attachment: Combined Effects.pdf (1.8MB) This file has been downloaded 865 times
|
|
a nitrogen rich explosive
Banned troll
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 176
Registered: 28-3-2016
Member Is Offline
Mood: Repentant
|
|
Hmm. BDP (benzenediazonium perchlorate and aluminium powdered to within an inch of its life...
I can't think of a better signature.
|
|
PHILOU Zrealone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Quote: Originally posted by MineMan ![](images/xpblue/lastpost.gif) | All,
I have heard a lot of folks bash the addition of aluminum powder for added energy because it does not react along the detonation wave...
Please see the attached presentations, they are very interesting and show that properly sized, the Al or Si powder can contribute to the Gurney
velocity, and of course greatly increases the energy. The trick is that an energetic plasticizer must be used, not an inert plasticizer. I have
tried Si in ANNM mixtures, it seems to be less sensitive than ANNMAL. One advantage of silicon is it is brittle, making milling easier. I have
thought of pushing the use of silicon for commercial explosives, but Al is still a little cheaper...
http://www.dtic.mil/ndia/2012IMEM/13890anderson10B.pdf
Also, the addition of Al between 10-30% increases the duration of the peak detonation pressure several fold... I know for blasting that even a few
more miliseconds of pressure makes a large difference, hence why a proper amount of clean crushed stemming is used.
|
Remains to see comparative datas from unaluminized vs aluminized Explosives on:
-Lead block test 10g
-Sand crushed test 1g
-Fragmentation test
-VOD mesurements
-Blast pendulum test
It is conceivable that if the Al has a reduced oxyd layer and a fine mesh enough with the perfect % and an appropriate explosive (between positive OB,
zero OB or a slighly negative OB) that the oxygen taken away as Al2O3 allows for sufficient energy to compensate for (or surpass) the energy for CO
formation instead of CO2...but Al must not be pushed too far in% as to form only C...what would be detrimental...
So conventionnal nitroaromatics have too low a negative OB to be of interest for that specific effect/application.
[Edited on 3-5-2016 by PHILOU Zrealone]
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
PHILOU,
Those are some really good points. But what about those explosives, such as AN mixtures, and maybe ideal explosives which create H20 vapor upon
detonation? Even if the explosive was OB%- the aluminum should strip the oxygen molecule from the H20. I know they tried high percentages 10-20% in
ANFO, but the issue they encountered was and excess of hydrogen gas because of that mentioned above. The quarries were not all that happy with
fireballs emitting from the rocks several minutes after the blast...
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
PHILOU,
I also forgot to mention, in my last post the powepoint shows the VOD, it is about a 5% drop. This is true for adding Al to ANFO also, it certainly
does help with rock fragmentation. But again, with the case of blasting the explosive is confined underground allowing several more mili seconds of
reaction time. 100-200mesh is used for blasting, in the form of flakes.
|
|
PHILOU Zrealone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Quote: Originally posted by MineMan ![](images/xpblue/lastpost.gif) | PHILOU,
I also forgot to mention, in my last post the powepoint shows the VOD, it is about a 5% drop. This is true for adding Al to ANFO also, it certainly
does help with rock fragmentation. But again, with the case of blasting the explosive is confined underground allowing several more mili seconds of
reaction time. 100-200mesh is used for blasting, in the form of flakes. |
What powerpoint are you refering to? I only see pdf's
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Philou,
If you look at the compositions used in explosives from WW2 (widely available) you'll notice that many are hugely OB defficient yet include a lot (up
to 20-30%) aluminium for increased blast effect. VOD might suffer, but depending on what your purpose is an increased blast can be more desirable.
Just have a look at the different Torpex compositions for example.
There are many TNT + your nitramine of choice + a lot of aluminium compositions out there.
On the other hand, when I look at small caliber (german 20mm flak for example) ammo they tend to favor oxygen balanced compositions.
|
|
a nitrogen rich explosive
Banned troll
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 176
Registered: 28-3-2016
Member Is Offline
Mood: Repentant
|
|
An integrated sort of aluminium-dispersing thermobaric composition might be interesting (I mean Al mixed with TNT in such a way that the TNT explodes,
forms the Al into a fine powder and then burns the cloud of Al dust.)
I can't think of a better signature.
|
|
PHILOU Zrealone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Quote: Originally posted by Herr Haber ![](images/xpblue/lastpost.gif) | Philou,
If you look at the compositions used in explosives from WW2 (widely available) you'll notice that many are hugely OB defficient yet include a lot (up
to 20-30%) aluminium for increased blast effect. VOD might suffer, but depending on what your purpose is an increased blast can be more desirable.
Just have a look at the different Torpex compositions for example.
There are many TNT + your nitramine of choice + a lot of aluminium compositions out there.
On the other hand, when I look at small caliber (german 20mm flak for example) ammo they tend to favor oxygen balanced compositions.
|
I know!
I was refering to Mineman documents and the subject of the tread.
I wrote:
"So conventionnal nitroaromatics have too low a negative OB to be of interest for that specific effect/application."
The post detonation thermobaric effect was not considered here, nor the explo-implosion effect of nano Al sponge dopped with TNT.
Only the effect onto the detonation process that needs good intimity/viccinity of oxygen and Al to allow "immediate" reaction in the detonation zone.
True that Blast pendulum and LBT will benefit from detonic effect but also from the post blast/detonation reactions.
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Philou
you are right they are both PDFs. Sorry for the confusion . In regards to the
ANFO, that comes from industry experience.
I know this is an effect we have known about for a long time, but I think the authors did some great additional work on it. Everything I have
searched about in regards to Boron does not seem that promising, maybe the oxide layer is harder to burn through..., and I believe it uses more oxygen
per weight. Al powder sells to industry at about $1.20lb... that is pretty hard to beat.
|
|