alking
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
Would this be a good vacuum pump? Would I need to purchase anything else to make it work?
As I expected to happen sooner or later I have killed my rotary vane vacuum pump so I need a replacement. Looking on ebay at diaphram pumps this seems
to be a fairly inexpensive listing.
http://www.ebay.com.au/itm/Jelenko-JelCraft-model-DAA-V132-E...
Assuming this works properly (description says it powers on and pulls a vacuum) would this be a good unit? Also I cannot tell from the pictures, but
where exactly does the vacuum get pulled from? I am assuming I will need some kind of adaptors or something to hook up a hose to it, would anyone
happen to know what exactly I would need or where I could find that out? I've googled the model number and all that comes up are people selling used
ones, I can't find any decent description of the model or anything of use. If this is no good, or questionable, would anyone have any other
recommendations? I'd like to spend no more than 200$ max, if I have to go over that for a decent pump I'd rather spend ~50-75$ on another disposable
rotary pump.
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
You'll need a well built scrubber when doing acids.
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
Savant gel pumps have replaceable PTFE diaphragms, valves, and piping and fittings
for example
http://www.ebay.com.au/itm/Savant-Gel-Pump-GP110-Gel-Vacuum-...
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
there's the price scam so popular on ebay! (Look at the shipping price!)
Look at the chemglass pumps, pricey but apparently well worth it.
|
|
alking
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
After doing more research it seems that I'll need a decent diaphragm pump to pull much under -25in/mg so I bought another rotary pump to tide me over
for the time being. I'm still in the market, but diaphragms being so much more expensive I want to make sure I get one that will be capable of
everything I need which I may or may not have to save up for.
That Savant has a nice price tag and seems to be of decent quality though (and shipping is < 50$ for me). Looking up the specs it says it pulls a
max vacuum of 10 torr, but I don't understand how that translates to in/hg, could someone help explain this to me? Converting it directly google tells
me is 0.393701 in/hg, but I'm used to measuring a vacuum in negative numbers for one and I doubt this only pulls -0.39in/hg. Is this a different kind
of vacuum measurement or am I (google) doing the conversion wrong, what am I missing?
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
same as inches of mercury
So 10 Torr = 10 mmHg or ruffly .39inches
Torr is a much higher resolution scale for vacuum
|
|
yobbo II
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 739
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Check this for getto
http://laserkids.sourceforge.net/eng_vpump.html
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
10 Torr is a pull down to a 1.3% atmosphere or .013 atm or about 0.2 psi or 29.5 inches mercury but that would be for a new unit and a used unit would
probably do about half that, meaning 20 Torr which is still good for a chemical resistant pump.
If you need chemical resistance this would be good.
As for the shipping, it is a heavy cast aluminum, heavy duty item.
Savant gel pumps are high end, high priced stuff. I have two of them, one used and the other brand new.
http://www.engineeringtoolbox.com/vacuum-converter-d_460.htm...
https://www.youtube.com/watch?v=9_JKd1gUNHw
https://www.labequipmentparts.com/labware/product.aspx?b=225...
this has come up before
http://www.sciencemadness.org/talk/viewthread.php?tid=23287&...
[Edited on 5/1/2016 by Rosco Bodine]
|
|
alking
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
What exactly wears down over time that causes the vacuum to decrease? Is it anything serviceable that could be repaired, or worth repairing if so?
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
valve poppet seats but a valve and diaphragm kit is hugely expensive.
Some of the cheaper units may have polypropylene fittings and plumbing but mine are solid teflon and other fluoropolymer stuff all surfaces and the
motors are German made, probably the whole pump or maybe Swiss made on the pump itself maybe I can't remember, but they are top shelf and you don't
want to buy one new, grab your wallet.
They are fully rebuildable and you could cannibalize parts from several less than perfect working units to build one good one cheap.
They come with a free radio ![;)](./images/smilies/wink.gif)
https://www.youtube.com/watch?v=MUV8BR3qf6s
<object width=640 height=480><param name="movie"
value="http://www.youtube.com/v/MUV8BR3qf6s?version=3&autoplay=0&showinfo=1&modestbranding=1&controls=1&theme=dark&vq=hd720&am
p;hl=en_US&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess"
value="always"></param><embed
src="http://www.youtube.com/v/MUV8BR3qf6s?version=3&autoplay=0&showinfo=1&modestbranding=1&controls=1&theme=dark&vq=hd720&
hl=en_US&rel=0" type="application/x-shockwave-flash" width=640 height=480 allowscriptaccess="always"
allowfullscreen="true"></embed></object>
[Edited on 5/1/2016 by Rosco Bodine]
|
|
prettypolymer
Harmless
Posts: 7
Registered: 16-3-2016
Member Is Offline
Mood: No Mood
|
|
If any of you would need a sturdy dual head diaphragm pump, drop me a line, i have plenty. They're all from KNF, so heavy duty german quality, easily
servicable with very affordable spare parts.
|
|