AlexTheChemist
Harmless
Posts: 2
Registered: 17-4-2016
Member Is Offline
Mood: No Mood
|
|
Crystallization of KMnO4
If I have a solution of KMnO4 and KNO3, KCl , which I can serve solvent to separate and to crystallize the KMnO4 ?
|
|
|
Daffodile
Hazard to Others
Posts: 167
Registered: 7-3-2016
Location: Highways of Valhalla
Member Is Offline
Mood: Riding eternal
|
|
Acetone
|
|
|
solitanze
Harmless
Posts: 26
Registered: 4-2-2016
Member Is Offline
Mood: No Mood
|
|
I wouldn't recommend acetone, or any other organic solvent, which could be oxidized. And it's only sparingly soluble in acetone anyway.
Boiling down aqueous permanganate solutions give a lot of brown mud (MnO2). It's just not very stable.
How did you obtain this mixture?
|
|
|
morsagh
Hazard to Others
Posts: 187
Registered: 20-2-2014
Member Is Offline
Mood: No Mood
|
|
Just let it stand to evaporate most of water and filter crystallized KMnO4 as the less soluble salt. This is best you can do. Maybe try adding a
little bit of your solution to saturated solution of KNO3 but it is all affected by that if most solubility of KMnO4 is from dissociation in water but
i don´t think so.
|
|
|
chemplayer...
Legendary
Posts: 191
Registered: 25-4-2016
Location: Away from the secret island
Member Is Offline
Mood: No Mood
|
|
We've tried this a few times (we also did a video on preparing it a while back) but we've never got any substantial crystals from it.
The best you can do really is boil down / evaporate the solution and chill for an extended period at close to 0C. The permanganate will crystallise
out slowly but when we've tried it we got some crystals but they were clearly impure with other salts co-crystallising.
As others have commented, best not to add anything organic or oxidisable (obviously alcohols, but also I wouldn't put ketones in either) to try to
crash it out.
Normally though permanganate is used in solution for reactions anyway, so you may be able to get away with using the solution as it is. Perhaps
titrate and get an estimate of the concentration though first as permanganate is generally not very forgiving on organic matter in large quantities!
|
|
|
Daffodile
Hazard to Others
Posts: 167
Registered: 7-3-2016
Location: Highways of Valhalla
Member Is Offline
Mood: Riding eternal
|
|
It might be a better idea to generate the Permanganate from Manganate in Acetone by adding Hydrochloric Acid, since its less likely to be oxidized
than dust and crap that gets into the beaker.
|
|
|
morsagh
Hazard to Others
Posts: 187
Registered: 20-2-2014
Member Is Offline
Mood: No Mood
|
|
I think permanganate will oxidise HCl to chlorine... So not best idea...
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
There is special chemistry apparatus specifically designed to prevent gravity-influenced foreign objects interfering with experiments.
It's called a bit of paper, towel, filter or whatever placed on top.
|
|
|
Daffodile
Hazard to Others
Posts: 167
Registered: 7-3-2016
Location: Highways of Valhalla
Member Is Offline
Mood: Riding eternal
|
|
Quote: Originally posted by aga  |
There is special chemistry apparatus specifically designed to prevent gravity-influenced foreign objects interfering with experiments.
It's called a bit of paper, towel, filter or whatever placed on top. |
Yeah but since I don't clean my beakers with Nitric, there are usually contaminants that reduce the Permanganate within a few days.
|
|
|
clearly_not_atara
International Hazard
Posts: 2800
Registered: 3-11-2013
Member Is Online
Mood: Big
|
|
Add excess K2CO3 and cool to around -5 C.
To reduce the solubility of MnO4-, your best bet is to increase the concentration of K+, since the solubility product [MnO4-][K+] is the relevant
physical constant. Potassium carbonate is the most soluble potassium salt, so it wins. The precipitate may contain some KNO3 and KCl; this should not
affect it too much, unless there's way too much KNO3 in your solution.
|
|
|
Daffodile
Hazard to Others
Posts: 167
Registered: 7-3-2016
Location: Highways of Valhalla
Member Is Offline
Mood: Riding eternal
|
|
| Quote: Originally posted by clearly_not_atara | Add excess K2CO3 and cool to around -5 C.
To reduce the solubility of MnO4-, your best bet is to increase the concentration of K+, since the solubility product [MnO4-][K+] is the relevant
physical constant. Potassium carbonate is the most soluble potassium salt, so it wins. The precipitate may contain some KNO3 and KCl; this should not
affect it too much, unless there's way too much KNO3 in your solution. |
So what about dissolving the Manganate in water, boiling down to minimal volume, bubbling CO2 through the mixture, adding Potassium Carbonate,
filtering, cooling, and allowing to crystallize? Sounds like an alright plan.
|
|
|
clearly_not_atara
International Hazard
Posts: 2800
Registered: 3-11-2013
Member Is Online
Mood: Big
|
|
I would not boil it at standard pressure; I'm concerned that the permanganate will degrade to manganate upon boiling. Similarly, introducing carbon
dioxide (an acid) could cause permanganate to decompose. Permanganate is very unstable.
https://en.wikipedia.org/wiki/Potassium_manganate#Synthesis
| Quote: | | In the laboratory, K2MnO4 can be synthesized by heating a solution of KMnO4 in concentrated KOH solution followed by cooling to give green crystals
|
Boiling the solution down under vacuum, no hotter than 50ºC (I made this number up), should work okay, but should only be necessary if the
concentration of permanganate is already very low. The instability and reactivity of KMnO4 makes it hard to isolate.
http://pubs.acs.org/doi/abs/10.1021/ja01424a003?journalCode=...
This paper discusses the precipitation of KMnO4 from mixed potassium salt solutions with an eye to thermal effects. If someone can download it, the
procedures given will certainly be better than the one I'm making up as I go along.
Using Wikipedia numbers, the solubility product [K+][MnO4-] = 0.164 (mol^2 / L^2) at 20 C, or 2.5 at 65 C, according to Wikipedia; the solubility of
K2CO3 is about eight moles per litre at 20 C, or sixteen moles of K+ per litre, so if the solution is saturated with K2CO3, the solubility of MnO4
should drop to (0.164 / 16.2 = 0.0101) moles per litre, causing most of it to precipitate. Because, in real solutions, inter-ionic interactions are
nonzero, this estimate is going to be a little off, but the gist of the idea makes sense.
You should be able to get crystals by adding K2CO3 to the solution when it is warm and then cooling; otherwise, precipitation may be a bit of a mess.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
