ldanielrosa
Hazard to Others
Posts: 124
Registered: 25-4-2007
Member Is Offline
Mood: transparent
|
|
What to do with a barrel of bleach
I just committed to buying a drum full of 12% hypochlorite from someone who's moving and closing his roof cleaning business. He sold it as a severe
loss due to time constraints.
This caught my interest because several experiments use hypochlorite. It's readily available and not too expensive, but I'm a bit manic with it and
use it up way too fast. I'm already thinking about chloroform, chlorate, and hydrazine. What other applications could I bend this to?
|
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
Hypochlorite degrades over time. Store in a cool, dark place. You named the three things that came to my mind when I read the title. You could
always dilute and use in in the washroom 
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
|
DraconicAcid
International Hazard
Posts: 4356
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Online
Mood: Semi-victorious.
|
|
Great for all kinds of oxidation. Ferrate, perhaps?
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
That's where my mind would go, hot hypochlorite can do miraculous things. Whenever I would look through Mellor's and come across a high oxidation
state compound it seemed like one of the preps always used hypochlorite.
|
|
|
Aqua_Fortis_100%
Hazard to Others
Posts: 302
Registered: 24-12-2006
Location: Brazil
Member Is Offline
Mood: †
|
|
Bleach is a cheap and great oxidizing agent.
Here in Brazil is difficult to find 12% stuff, OTC is mostly 2-3%. I found 12% variety only in chemical store and in 25 L bottle, it has a tiny hole
in the cap, I think is just to release any excess pressure from the bottle as the hypochlorite degrades.
Chlorate from bleach is a lot of work, managing liters of solution to get crappy yeilds of it, much better and elegant is the electrochemical route to
chlorate, even with very improvised apparatus. The same goes for chloroform, except for the electrochemical way, since probably one could make some
nasty chloroacetones by trying electrolysis (better with calcium hypochlorite).
Vast range of organic oxidations could be made with it too. Hydrazine sulfate synthesis is the first that comes to mind, and its a interesting way to
use your bleach. Thinking about how much hydrazine sulfate you can make with 5 gallons of concentrated stuff, now imagine a yield from DRUM of it!
Related compounds, like semicarbazide*HCl can be made too. All of these are nice precursors to many interesting compounds (many of it energetic
compounds like azides, tetrazoles, nitrotriazolone, etc).
Another interesting thing is that strong acidic hypochlorite, could dissolve most noble metals, its very agressive oxidizing chemical. There is a Brazilian patent (portuguese) that claims using it with HCl to leach platinum metal group metals from extinct ceramic car catalysts.
Talking about ferrates I wonder if they could be used just like Fenton's reagent to oxidize contaminants / destroying organic compounds and make safer
the disposing of waste chemicals in environment.
[Edited on 19-2-2016 by Aqua_Fortis_100%]
"The secret of freedom lies in educating people, whereas the secret of tyranny is in keeping them ignorant."
|
|
|
j_sum1
Administrator
Posts: 6335
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
That patent sounds interesting.
If you had a plausible way of extracting Pt from waste catalytic converters then you would have something quite valuable there.
|
|
|
Aqua_Fortis_100%
Hazard to Others
Posts: 302
Registered: 24-12-2006
Location: Brazil
Member Is Offline
Mood: †
|
|
Quote: Originally posted by j_sum1  | That patent sounds interesting.
If you had a plausible way of extracting Pt from waste catalytic converters then you would have something quite valuable there.
|
Actually this is a method used by some amateurs do to remove PMG from catalytic converters.. This is very interesting since is a nice OTC substitute
for chlorate/HCl oxidizing mix. Most results from amateurs experiments in this field come from Gold Refining Forum, they have entire threads focusing
on leaching PMG out of catalytic honeycombs and other materials.
"The secret of freedom lies in educating people, whereas the secret of tyranny is in keeping them ignorant."
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
Not hot, if you want to make ferrates! The worst enemy of ferrate synthesis is heat. Ferrates are synthesized in ice-cold solution.
Smells like ammonia....
|
|
|
ldanielrosa
Hazard to Others
Posts: 124
Registered: 25-4-2007
Member Is Offline
Mood: transparent
|
|
I hadn't thought of ferrate yet. Thanks. I'm supposed to go pick it up tomorrow. I needed time to get loading ramps, a winch, and another body to
muscle a 250+ kg load into my truck.
I don't have ready access to waste catalytic converters. Local laws keep wrecking yards from releasing them.
|
|
|
chemplayer..
Awesome
Posts: 48
Registered: 12-2-2016
Member Is Offline
Mood: No Mood
|
|
Some ideas which might lend themselves to 'industrial scaling':
1. Hydrazine sulfate from bleach/urea/sodium hydroxide/sulfuric acid.
2. Anthranilic acid from bleach/phthalimide/sodium hydroxide.
3. Chloroform via haloform process.
4. Manganese dioxide via manganese sulfate/bleach/sodium hydroxide - store up all that oxidising power!
|
|
|
ldanielrosa
Hazard to Others
Posts: 124
Registered: 25-4-2007
Member Is Offline
Mood: transparent
|
|
Idea #4 is new to me, and very interesting. Do you have a link for this?
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by ave369 |
Not hot, if you want to make ferrates! The worst enemy of ferrate synthesis is heat. Ferrates are synthesized in ice-cold solution.
|
In a very real sense.
But, in another much more real sense, no.
Here's what the WIKI page says about making ferrates
"Georg Ernst Stahl (1660 – 1734) first discovered that the residue formed by igniting a mixture of potassium nitrate (saltpetre) and iron powder
dissolved in water to give a purple solution Edmond Frémy (1814 – 1894) later discovered that fusion of potassium hydroxide and iron(III) oxide in
air produced a compound that was soluble in water. "
The solutions are unstable when hot, but the salts themselves are OK.
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
The slag method of making ferrates works, but is low-yield and impractical. Above 198 deg. C dry potassium ferrate starts to decompose. This is
somewhat higher than the temperature of its decomposition in solution, but still low.
Smells like ammonia....
|
|
|
chemplayer..
Awesome
Posts: 48
Registered: 12-2-2016
Member Is Offline
Mood: No Mood
|
|
Can't find a reference but from practise we know that mixing hypochlorite and manganese sulfate gives an instant thick dark brown precipitate of MnO2.
Some experimentation would be needed to see if it's quantitative and what conditions are best (thinking about it having NaOH would possibly react and
create an impurity of Mn(OH)2 in the product).
|
|
|
Sulaiman
International Hazard
Posts: 3723
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
ldanielrosa
Link http://www.sciencemadness.org/talk/viewthread.php?tid=21294
|
|
|
ldanielrosa
Hazard to Others
Posts: 124
Registered: 25-4-2007
Member Is Offline
Mood: transparent
|
|
Two attempts on manganese dioxide:
The first was with a slight excess of bleach, and it seemed to come out well. The result weighed more than quantitative, so I think maybe some
moisture and manganese hydroxide. The color is very dark.
The second one I tried adding NaOH to reconvert the chlorine gas back to a mix of NaCl and NaOCl. That one had ugly results. I haven't washed it
yet, but the color is wrong. More medium brown. I'm thinking Mn2O3 and Mn(OH)2.
One attempt on potassium chlorate:
The stainless steel pot wasn't so much. It wasn't destroyed either, but it's not pretty. I took it off the heat and dumped it into a plastic bucket.
About the color of merlot. I don't think I'll get much out of that one, if anything.
|
|
|
chemplayer...
Legendary
Posts: 191
Registered: 25-4-2016
Location: Away from the secret island
Member Is Offline
Mood: No Mood
|
|
I wonder if it's possible, given a mixture of NaOH and NaOCl in solution, to work out how much NaOH specifically there is, and then use an acid to
neutralise it selectively leaving just NaOCl which you could then use and improve yields and purity of products?
One idea which springs to mind is to use a 'weak' acid like acetic acid, perhaps keeping the mixture chilled, producing sodium acetate which shouldn't
then interfere with subsequent reactions (e.g. manganese II acetate is water soluble so won't precipitate out). Unless of course acetic acid itself
undergoes some crazy reaction with hypochlorite... not sure.
The challenge would be how to work out via titration the specific amount of NaOH. I suspect that NaOCl on its own appears strongly basic with a pH
test, so doing an acid-base titration might not work. Perhaps adding excess MgSO4 solution to the bleach, filtering the insoluble hydroxide, drying it
and weighing it might give an indication (problem might be that filtering and drying the hydroxide is normally a pain in the a$$).
Just some ideas to share...
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Chloroform synthesis I can imagine industrial-style, though certainly just for practicality, not profit. Hydrazine sulfate, though, would probably
have better yield and less loss, perhaps for profit on SM. Though I bring this up simply as a way to measure what's worth making mass-scale, as you
probably don't need the 10 odd gallons of chloroform you'd get from using half the drum of bleach. Though I suppose I'm forgetting that it's rather
concentrated. Perhaps you'd get a better yield than with typical laundry bleach.
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
I appear to have a Very large container of 36% sodium hypochlorite.
For no apparent reason i've done nothing with it at all.
The last time i made chloroform i just stuck it in a drawer for a year.
I forget who said it first (IrC IIRC) :-
There is no point making and keeping lots of any potentially dangerous chemicals unless you have an immediate use for them
As it stands, i could make a lot of chloroform and other stuff, but there is no point as i have no immediate need.
Storage of chemicals is a whole other ball-game.
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Good point, and I suppose that applies to most of the highly oxidized, oxidizing products from most reactions with bleach. So perhaps nothing should
be made from the entire barrel of bleach, something I totally would've done...
|
|
|
Amos
International Hazard
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
If you work with hexavalent chromium much, hypochlorite can be used to convert chromium(II) hydroxide back to sodium chromate, effectively allowing
you to recycle it each time it is reduced.
|
|
|
ldanielrosa
Hazard to Others
Posts: 124
Registered: 25-4-2007
Member Is Offline
Mood: transparent
|
|
I keep getting excellent feedback. Thanks, everybody!
aga and The Volatile Chemist, true enough. However, one pint of chloroform takes less space than 4 gallons of bleach. I also may have a use for
chloroform in the future- I plan to run a few extractions. I know the stuff isn't pure, but a larger quantity is easier to justify the effort later
on. Don't worry, I stabilized it with 1% ethanol.
This is more of a discontinued candy shop item. The bleach is degrading, and taking more space than it should. I'm looking to have fun wasting a
hazardous substance that's normally a bit spendy use so inefficiently. Sadly, I may run out of the other ingredients first. I only have 500 grams of
manganese sulfate.
So I've given some thought to lead dioxide too. I have a fair amount of lead chloride. The solubility is poor, and that may make the reaction much
less efficient.
chemplayer, I may do that out of curiosity. I'm concerned about how long it would take for the Mg(OH)2 to precipitate, and that the remaining
solution may become less stable. I'd need to use it immediately for the information to be of use to me.
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Is that concentration of bleach a viable chlorine gas source? With proper safety precautions and a reasonable reaction set-up, you might try some
interesting things with chlorine gas.
|
|
|
Amos
International Hazard
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
I wouldn't bother making manganese dioxide out of manganese sulfate; if you browse online it's usually cheaper to buy the former.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
