organicchemist25
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 136
Registered: 12-2-2014
Member Is Offline
Mood: No Mood
|
|
Recommendations for decent rotovap
Looking to add a rotovap to the laboratory. I see some on eBay, but mostly China-made stuff. I do see some Buchi ones, as well. I was just trying to
get some feedback, hopefully before my purchase. I'm not looking to spend more than 2000.00$, if at all possible.
So, if anyone has some suggestions on decent quality for around 2k, I would appreciate it. I don't see the need for more than a 1 or 2 liter for my
purposes.
Thanks
|
|
organicchemist25
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 136
Registered: 12-2-2014
Member Is Offline
Mood: No Mood
|
|
I think they would all be capable of reduced pressure distilling? I would think so, but please update me, if I am incorrect. Also, if I really need to
spend a little more to get a good model that will last and have everything I would need, than I will. I really don't want to go over 3250.00$ budget
for just personal home use.
Thanks again.
|
|
Quatro
Harmless
Posts: 22
Registered: 31-10-2015
Location: Arizona
Member Is Offline
Mood: Nucleophillic
|
|
I think that rotovap is just another word for reduced pressure distillation...
I've also looked on eBay trying to see what was available but I don't know how easy it is to get good rotovaps without spending a huge amount of
money... But then again maybe Chinese stuff works just as well?
Maybe look at Hydrion-Scientific on eBay
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have a number of rotovap parts, all needed to build a rotovap, other then a working motor right now. So if you want to buy the main rototor motor,
the rest of the parts I can sell for a very reasonable price. I keep thinking I will buy a motor myself and build a full system, but I have not had
time yet. I had two working rotator motors a while back and build and sold two full systems, one on here and one locally, so I can help find the
parts needed. I have condensers, water baths, seals, etc. Send me a u2u if interested.
Examples of the missing piece:
http://www.ebay.com/itm/Buchi-Rotovapor-RE111-Motor-Rotary-E...
http://www.ebay.com/itm/Working-Buchi-R-110-Motor-Stand-and-...
http://www.ebay.com/itm/Brinkmann-Buchi-RE-121-Rotavapor-Lab...
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Online
Mood: PhD candidate!
|
|
I found an old cardboard box in the corner of one of the prep rooms at my school containing a nice rotovap that's just been gathering dust for 20
years.
Quite a shame.
|
|
HeYBrO
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 289
Registered: 6-12-2013
Location: 'straya
Member Is Offline
Mood:
|
|
Quote: Originally posted by zts16 ![](images/xpblue/lastpost.gif) | I found an old cardboard box in the corner of one of the prep rooms at my school containing a nice rotovap that's just been gathering dust for 20
years.
Quite a shame. |
Ask them if you can have it!
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Quote: Originally posted by Quatro ![](images/xpblue/lastpost.gif) | I think that rotovap is just another word for reduced pressure distillation...
I've also looked on eBay trying to see what was available but I don't know how easy it is to get good rotovaps without spending a huge amount of
money... But then again maybe Chinese stuff works just as well?
Maybe look at Hydrion-Scientific on eBay |
It's not just reduced pressure... it's expanded surface area, not to mention heating.
I'd definitely be interested in a cheap rotovap.
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
The keys parts of any rotary evaporator are the rotating sealing system (motor, seals, glass stem, etc), the condenser, some water bath or similar
heating system (they used steam baths when I started doing chemistry..., I think they were coal fired...:-), and a controllable vacuum source. Many
come with a fancy stand, but older ones were just put on a ring stand or lattice work, often multiple pieces connected by vacuum hose in the old days.
If the rotary sealing system works, that is the hardest part, but a good condenser is also key. The heating is just needed as you must provide heat
as fast to boil the solvent as fast as the condenser cools or the solvent won't boil quickly. That load depends on the heat capacity of the solvent-
hexane is easy, ethyl acetate takes more heat and evaporating ethanol or water requires a huge input of heat. And the vacuum can be an aspirator,
cheap diaphragm pump, a fancy multi stage diaphragm pump, or even a real high vacuum pump in some cases (if you want to evaporate DMF or octanol, you
will need a great pump).
I have known people to find great deals on them occasionally, as cheap as $500 for some cheap system that needed repairs, up to $4000 for a nearly new
Buchi system, and that does NOT include the vacuum system, which is almost always sold separately. Those can run from a $5 aspirator to a $6,000+
vacuum pump, some now are even computer controlled (not that they work very well IMHO).
|
|
CharlieA
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 646
Registered: 11-8-2015
Location: Missouri, USA
Member Is Offline
Mood: No Mood
|
|
Years ago, I left a solution of a sugar phosphate ester on a rotary evaporator overnight. After all, what could go wrong, right? Well the next morning
after discovering the water bath contained a dark syrup with the RB flask originally containing my product floating in it, I realized what could go
wrong: first, a power failure caused the vacuum pump and water bath heater to go off, the loss of vacuum led to the flask of solution falling into the
water bath, then the power came back on and the water bath turned my product into syrup. Since I was pretty new on the job, I was sure I would be
fired. When my German boss (not an ethnic slur) came in, I confessed what happened. After sucking on his pipe a bit (I told you it was years ago), he
said "Vell, vat will you do next time?" After I said I would not let a rotary evaporation run over night, he said "Vell, get back to vork!" After 50
or 60 years of work, I can honestly say that I never had a more understanding boss!
@zts16: If the school will give you that rotovap, take it. Operated properly, it is a gentle way to concentrate a solution, or even evaporate it to
dryness. I picture a rotary evaporator as a stationary lyophilizer.
|
|
organicchemist25
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 136
Registered: 12-2-2014
Member Is Offline
Mood: No Mood
|
|
Finally found me a nice Rotovap practically brand new
|
|
laserlisa
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 5-2-2016
Member Is Offline
Mood: No Mood
|
|
Looks nice.
Which brand and model is it?
How much did you pay?
Does it work well?
Would you recommend it? ![:)](./images/smilies/smile.gif)
Thanks in advance.
|
|
prettypolymer
Harmless
Posts: 7
Registered: 16-3-2016
Member Is Offline
Mood: No Mood
|
|
Is anybody interested in any of these beauties?
650 EUR for the rotavaps without pump, 850 for the one with pump and manual controller (basically a precision swagelok bleed valve).
items located in germany. shipping will be a bit pricey due to weight and volume.
![DSC_0217_resized.jpg - 689kB](http://www.sciencemadness.org/talk/files.php?pid=447556&aid=50427)
![heidolph-5 20005,5.jpg - 227kB](http://www.sciencemadness.org/talk/files.php?pid=447556&aid=50429)
[Edited on 2-5-2016 by prettypolymer]
[Edited on 2-5-2016 by prettypolymer]
[Edited on 2-5-2016 by prettypolymer]
|
|
gdflp
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1320
Registered: 14-2-2014
Location: NY, USA
Member Is Offline
Mood: Staring at code
|
|
The price might factor into that.
|
|
prettypolymer
Harmless
Posts: 7
Registered: 16-3-2016
Member Is Offline
Mood: No Mood
|
|
thank you, i have edited my post accordingly.
|
|