Pages:
1
2 |
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Chemical combinations to avoid
I have been reading through the phosgene threads ... scary,
and even though my best years are behind me I have no intention of making any (at my current skill level ![;)](./images/smilies/wink.gif)
If I follow well prescribed experiments the dangers are usually highlighted,
but when I start messing around with 'random' chemical mixtures I do not have the required knowledge/experience to determine if any 'nasty' side
reactions will occur,
so I'm wondering if there is a list of generally hazardous mixtures?
I would not want a terrorist cookbook to be made, just warnings of potential hazards.
e.g. I have learned that conc. HNO3, NH3, or H2O2 easily form explosive compounds
and chlorine containing compounds can release Cl2 gas (due to the small scales that I use and the strong smell, I'm not too worried about Cl2)
so, I presently have no fluorine containing compounds. I also have no cyanides at the moment for similar reasons.
So, is there a list of things NOT to mix?
If not then would it be worth making a 'sticky' to reduce the risks for the less experienced amongst us?
so far I have found stuff like this;
http://chemistry.about.com/cs/toxicchemicals/a/aa603003a.htm
hazardous chemicals;
https://en.wikipedia.org/wiki/List_of_extremely_hazardous_su...
https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_tab...
http://ccc.chem.pitt.edu/wipf/Web/HCH.pdf (this is a generally useful document)
|
|
mayko
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1218
Registered: 17-1-2013
Location: Carrboro, NC
Member Is Offline
Mood: anomalous (Euclid class)
|
|
Chloromethylethers, from the reaction of formaldehyde and hydrochloric acid, have always struck me as a disaster lying in wait for a home chemist.
al-khemie is not a terrorist organization
"Chemicals, chemicals... I need chemicals!" - George Hayduke
"Wubbalubba dub-dub!" - Rick Sanchez
|
|
annaandherdad
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
I did some experiments once using hydrogen to reduce metal oxides. Copper works very well, and makes a beautiful demo. I also managed to reduce iron
oxides. Then I started thinking about other metal oxides, and maybe using CO as a reducing agent. Part of the motivation for this is that CO is
the actual reducing agent in old fashioned ways of making iron. Of course I know the dangers of CO, and I was planning to take that into account.
What I didn't realize is that CO reacts with nickel to make nickel carbonyl, which is extremely toxic, much more so than CO itself.
Any other SF Bay chemists?
|
|
ave369
Eastern European Lady of Mad Science
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
* Hypochlorite and acid, especially hydrochloric. Instant chlorine attack.
* Cyanoferrates and heat. Cyanoferrates and acids. Hell, cyanoferrates and everything except things they are supposed to react with.
* Fluorides and acids. Not only you can be poisoned, you might ruin your glassware.
* Concentrated nitric acid and metals in large amounts, if you don't have a fume hood. The "fox tail" is impressive, and the foaming acid can even
overflow the flask.
* Fuming nitric acid and rubber gloves (butyl rubber is safe, the other types aren't).
Smells like ammonia....
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Cyanoferrates (especially the yellow variation) are surprisingly stable and the risk of poisoning yourself with hydrogen cyanide is highly overrated.
I have done experiments with K3Fe(CN)6 and K4Fe(CN)6 in combination with 20% HCl or 20% H2SO4. No problem at all. Only the combination of heat and
strong acid at quite high concentration can release HCN, and even then the reaction is incomplete and has many side reactions. If this reaction were
indeed as easy as many people tend to believe, then cyanoferrates would be much more popular for making your home-made cyanide salts.
Some unexpected and really dangerous reactions:
- Mix dry calcium hypochlorite with TCCA or Na-DCCA and add a small amount of water. A very violent reaction starts, with charring of the material and
possibly explosion. A lot of toxic fumes are released as well. Both are swimming pool chlorine compouds, but the hypochlorites and chlorinated
cyanuric acid derivatives are not compatible with each other.
- Solid chlorites with reductors. These mixes are very sensitive, even more so than chlorates. Chlorites are easy to obtain and are sold without
questions asked, because of their use as MMS or for water purification. In solid form, sodium chlorite is quite dangerous.
- TCCA in itself is one of the more dangerous chemicals and I still am surprised that this is sold to the general public. With organics it can lead to
extremely exothermic reactions, leading to fire, especially if some acid is added as well. With ammonia, the reaction of TCCA is explosive (try mixing
a pea sized, NOT LARGER, piece of TCCA with 12% ammonia or 25% ammonia, you will be impressed, this is more violent than potassium with water!).
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
A somewhat more general statement per part of Woelen's comment is the classic mistake of mixing ammonia (or ammonium salts, or amines, or urea) and
chlorine in excess (or an excess of hypochlorous acid or compounds creating it like TCCA plus water, Ca(ClO)2 plus moisture + CO2).
The resulting yellow oily liquid is a totally impractical high explosive detonating on exposure to organics, sunlight, heat, shock,...
[Edited on 19-10-2015 by AJKOER]
|
|
careysub
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
This segues into chemical storage guidelines in general. Every chemical storage guideline document is going to a have a section devoted to chemical
incompatibilities:
https://www.towson.edu/adminfinance/facilities/ehs/documents...
|
|
kecskesajt
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 299
Registered: 7-12-2014
Location: Hungary
Member Is Offline
Mood: No Mood
|
|
Chloroform with ammonia.(HCN)
Or chloroform with warm,concentrated nitrating acid.(CCl3NO2)
Ca(OCl)2 and ammonia.H4N2,NCl3,NH2Cl and NHCl2
Ca(OCl)2 and cc. H2SO4. Rapid explosion
H2SO5 and solvents. Violent explosion
ClF3 and anything.Even concrete will burn
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Quote: Originally posted by kecskesajt ![](images/xpblue/lastpost.gif) | Chloroform with ammonia.(HCN)
Or chloroform with warm,concentrated nitrating acid.(CCl3NO2)
Ca(OCl)2 and ammonia.H4N2,NCl3,NH2Cl and NHCl2
Ca(OCl)2 and cc. H2SO4. Rapid explosion
H2SO5 and solvents. Violent explosion
ClF3 and anything.Even concrete will burn |
The first reaction hardly occurs. It is very slow. Maybe in anhydrous conditions, but mixing some CHCl3 with 12% household ammonia certainly does not
lead to formation of dangerous amounts of HCN.
H2SO5 and ClF3 are not compounds which the average (or even well equipped) home chemist has at home.
|
|
fluorescence
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 285
Registered: 11-11-2013
Member Is Offline
Mood: So cold outside
|
|
As a Cyanide Chemist I find that its not only the reaction with acids or water but also redox reactions with certain metals, especially copper. It
will produce gases like Dicyan. Also some noble metal cyanides can give of toxic compounds if decomposed. So before you do any work with it you should
check for side reactions with your other educts.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Another cyanide danger: Oxidation of thiocyanate (thiocyanate itself being only moderately toxic) by hydrogen peroxide in acidic solution. This
oxidation may lead to formation of HCN. Whether dangerous amounts of HCN can escape from the liquid is uncertain. Usually, concentrations are too low
to have large amounts of HCN in the surrounding air, but if this reaction occurs with large quantities, then it is something to take into account.
[Edited on 20-10-15 by woelen]
|
|
kecskesajt
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 299
Registered: 7-12-2014
Location: Hungary
Member Is Offline
Mood: No Mood
|
|
25% ammonia and CHCl3 are mixed.Then there is going to be a runnaway reaction.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
But in this runaway I expect no HCN to be formed.
|
|
MeshPL
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 329
Registered: 20-4-2015
Location: Universe
Member Is Offline
Mood: No Mood
|
|
H2SO5 is nothing else than H2SO4 and H2O2. Obviously resulting concentration is laughable... and exists in equilibrium... but when you try adding some
organics, you may change your mind.
|
|
Little_Ghost_again
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 985
Registered: 16-9-2014
Member Is Offline
Mood: Baffled
|
|
Quote: Originally posted by woelen ![](images/xpblue/lastpost.gif) | Cyanoferrates (especially the yellow variation) are surprisingly stable and the risk of poisoning yourself with hydrogen cyanide is highly overrated.
I have done experiments with K3Fe(CN)6 and K4Fe(CN)6 in combination with 20% HCl or 20% H2SO4. No problem at all. Only the combination of heat and
strong acid at quite high concentration can release HCN, and even then the reaction is incomplete and has many side reactions. If this reaction were
indeed as easy as many people tend to believe, then cyanoferrates would be much more popular for making your home-made cyanide salts.
Some unexpected and really dangerous reactions:
- Mix dry calcium hypochlorite with TCCA or Na-DCCA and add a small amount of water. A very violent reaction starts, with charring of the material and
possibly explosion. A lot of toxic fumes are released as well. Both are swimming pool chlorine compouds, but the hypochlorites and chlorinated
cyanuric acid derivatives are not compatible with each other.
- Solid chlorites with reductors. These mixes are very sensitive, even more so than chlorates. Chlorites are easy to obtain and are sold without
questions asked, because of their use as MMS or for water purification. In solid form, sodium chlorite is quite dangerous.
- TCCA in itself is one of the more dangerous chemicals and I still am surprised that this is sold to the general public. With organics it can lead to
extremely exothermic reactions, leading to fire, especially if some acid is added as well. With ammonia, the reaction of TCCA is explosive (try mixing
a pea sized, NOT LARGER, piece of TCCA with 12% ammonia or 25% ammonia, you will be impressed, this is more violent than potassium with water!).
|
Thank you Woelen,
I have been making bleach etc for the haloform reaction and have both of these chemicals which I have used.
reading this stopped me trying something out while I trying to get a high amount of free chlorine.
I had assumed mixing these two would not be a problem! I am grateful to the op and Woelen for posting this information, so many combinations would
seem safe logically but not in reality.
I tried the small scale version as suggested (just to see what happens) I used half a pea size as I am a bit of coward! while impressed with the
reaction I am totally unimpressed with the soiled underwear! Despite the warning that its more vigorous than potassium (only seen that on you tube) I
wasnt expecting just how upset it gets with ammonia!
I would kind of like to do it again now I know what to expect, but for me its one of those ok seen it no need to try that again things!!
I think this thread or one like should be a sticky.
Dont ask me, I only know enough to be dangerous
|
|
Eddygp
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
Worries/grief/self-consciousness + ethanol
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 553
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
Like most such lists, it inspires mostly ridicule and irritation, and some curiosity. For grounds such as what their grounds for omission and
inclusion might be - very illogical.
Do you want to start going through the list?
|
|
careysub
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Quote: Originally posted by chornedsnorkack ![](images/xpblue/lastpost.gif) |
Like most such lists, it inspires mostly ridicule and irritation, and some curiosity. For grounds such as what their grounds for omission and
inclusion might be - very illogical.
Do you want to start going through the list? |
Why don't you show us how its done?
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 553
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
Starting...
Quote: |
Acids (Strong) Bases (Strong) |
Fine, worried about heat of neutralization...
Quote: |
Alkali Metals Water, Carbon Dioxide, Carbon Tetrachloride, and other chlorinated Hydrocarbons |
Alkali metals and water, fine - but they completely omit to mention acids, or any other oxidants.
For curiosity part, how easily do alkali metals react with carbon dioxide, as compared to oxygen?
"other chlorinated hydrocarbons"? Alkali metals with chlorinated hydrocarbons is a standard way of producing hydrocarbons. A halocarbon with too many
halogens might get violent, and also not give a useful specific product, though.
And why single out chlorocarbons? Are alkali metals by omission safe with bromocarbons, iodocarbons or fluorocarbons?
With stuff as reactive as alkali metals, "incompatibilities" gets uselessly big by any meaningful standard of inclusion. Actually, you should do the
opposite. List substances which either do not react with alkali metals, or do but do so in a quiet and safe manner.
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
"Today is a good day to die!" Supposed to be a Souix saying.
Suliman, everytime I start a new project, I ponder long and hard about the possible dangers. I read all about the known problems, and I try to
consult someone who has done something similar. I visit Org. Synthesis.....where experiments are usually accompanied by a list of cautions.
There are often many many things that can go wrong. As such, the road to Hell, is quite probably paved with dead chemists.
Sometimes there are deadly consequences, associated with common procedures.
So, I approach every project as if it might be a very dangerous project.
"Cyanoferrates (especially the yellow variation) are surprisingly stable and the risk of poisoning yourself with hydrogen cyanide is highly overrated.
I have done experiments with K3Fe(CN)6 and K4Fe(CN)6 in combination with 20% HCl or 20% H2SO4. No problem at all. Only the combination of heat and
strong acid at quite high concentration can release HCN, and even then the reaction is incomplete and has many side reactions. If this reaction were
indeed as easy as many people tend to believe, then cyanoferrates would be much more popular for making your home-made cyanide salts"
While these complex salts aren't very toxic, they are wildly explosive when mixed with certain oxidizing agents. They can detonate without
confinement. Though it usually takes a spark or whatnot to set 'em off.
https://www.youtube.com/watch?v=fPIVZo6QpBg
https://www.youtube.com/watch?v=Cv0SZZyGgyA
[Edited on 22-10-2015 by zed]
[Edited on 22-10-2015 by zed]
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I think that a thread like this become more valuable if unexpected incompatibilities between fairly common chemicals are identified, such as the one
between TCCA-like pool chemicals and hypochlorite-based pool chemicals.
Also the mention of unexpected high reactivity of common/easy to obtain chemicals adds value to this thread. At this place I want to mention sodium
chlorite (itself being stable and safe on storage, sold as MMS on eBay) being very reactive and giving unexpectedly dangerous interactions with many
other chemicals, both in the solid and dry state and in concentrated solutions.
|
|
Kagutsuchi
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 51
Registered: 21-6-2015
Location: Hungary
Member Is Offline
Mood: Happy
|
|
Any kind of ammonium compound and chlorates unless you want to make NH4ClO3. It explodes unexpectedly.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Thanks for all the info, I will try to avoid most of the above combinations.
It really is the unexpected bad combinations that I'm concerned with
I guess I have two choices;
mix stuff at will and hope I realise any bad combinations before any accident
OR
Be a little more 'professional' about it and do proper research before 'playing'
(For me it is mostly 'playing' as I have no intention, and too little remaining lifespan, to go professional, just a hobby)
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
"I have been reading through the phosgene threads ... scary!"
I got my personal favorite Phosgene story.
I was trying to break loose a stubborn bolt on my car one time. I wasn't in the lab, so my guard was down. I was alternately heating that bolt
super hot, with a torch, and then spraying it with Freon. Seemed OK.....until I thought about it.
The Freon I was using, was an analog to Carbon Tetrachloride.
It was outside, I didn't die, or even get sick. Does that make me less of a moron?
[Edited on 23-10-2015 by zed]
|
|
careysub
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Quote: Originally posted by zed ![](images/xpblue/lastpost.gif) |
"I have been reading through the phosgene threads ... scary!"
I got my personal favorite Phosgene story.
I was trying to break loose a stubborn bolt on my car one time. I wasn't in the lab, so my guard was down. I was alternately heating that bolt
super hot, with a torch, and then spraying it with Freon. Seemed OK.....until I thought about it.
The Freon I was using, was an analog to Carbon Tetrachloride.
It was outside, I didn't die, or even get sick. Does that make me less of a moron?
[Edited on 23-10-2015 by zed] |
You probably know about igniting "canned air" - which produces HF and carbonyl fluoride gas.
And pyrolysis of PTFE (Teflon) produces PFIB (perfluoroisobutylene; perfluoroisobutylene; octafluoroisobutylene;
1,1,3,3,3-Pentafluoro-2-(trifluoromethyl)-1-propene; CAS 382-21-8) which is listed as a toxic agent on Schedule 2 of the Chemical Weapons Convention:
https://www.opcw.org/chemical-weapons-convention/annexes/ann...
The yield for this from PTFE is 40-60%! PFIB is about ten times as toxic as phosgene, making it more toxic than the nerve gas Tabun.
[Edited on 23-10-2015 by careysub]
|
|
Pages:
1
2 |