sbreheny
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 145
Registered: 30-1-2014
Member Is Offline
Mood: No Mood
|
|
Fuming nitric acid storage
Hi all,
About a month ago I made some fuming nitric acid by reaction of concentrated sulfuric acid with sodium nitrate, followed by distillation. It worked
very well - based on careful density measurement it looks like I got 94% nitric acid. It sure fumes a lot!
I made about 100mL. My first attempt at storage was in an amber glass bottle with one of those green-colored Qorpak PTFE-lined caps. It worked fairly
well BUT every time I opened the bottle, the vapors would deposit a little bit of acid on the threads of the cap. This eventually weakened the cap and
it cracked. I replaced the cap, but I found that the vapor was even able to get around the liner and attack the non-coated side of the liner and cap
from the top. I think this was also related to deformation of the liner during opening and closing.
Finally, I got a really expensive Nalgene FEP bottle with Tefzel cap. This has stood up well so far, but I notice something puzzling. The outside
surface of the bottle develops a thin layer of liquid droplets, just like condensation, but this liquid is acidic and it has a slight strange smell -
not acrid like nitric acid but some kind of amine-like smell. This does not happen to glass or LDPE bottles in the vicinity so I don't think it is
condensation of water or any other chemical in he area.
Do you think that the nitric acid is permeating the bottle? After several weeks of storage, the total mass has not changed (to within one gram).
Sean
|
|
annaandherdad
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
I'm sorry to hear this. I got the same kind of bottle with the same kind of cap, and was planning to use it for RFNA. I wonder if it would be all
right if you rinsed and dried the cap after after use.
Any other SF Bay chemists?
|
|
KesterDraconis
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 27-3-2015
Member Is Offline
Mood: No Mood
|
|
I don't even store things like WFNA or 30% hydrogen peroxide for long periods of time after I make them. If I need them, then I make them the day
before or a couple days before, and just keep them in a beaker with a watch glass or something on top to keep stuff from falling in and contaminating
them.
The reason for this being that I had a small bottle of 30% H2O2 explode when the gas inside built up and blew off the top. I know that this can be
fixed just by opening the containers now and then to release and pressure, but I also know I am too lazy or forgetful to do so. (hence why the
hydrogen peroxide bottle blew up in the first place)
Besides, its not really that hard to prepare chemicals for an experiment. For WFNA you just need to set up your distillation, run it a couple hours or
so, and you are done. At the same time, I understand the convenience of having some ready though.
|
|
sbreheny
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 145
Registered: 30-1-2014
Member Is Offline
Mood: No Mood
|
|
annaandherdad: I think you could be extra careful and make the cap last longer. How long, I don't know. I think the perfect thing would be if I could
find a cap which was made of PTFE or Tefzel (ETFE?) and which matched the threads on an amber glass bottle.
One thing I noticed since my post - the amine odor I was referring to only happens if I touch the bottle and then smell the skin on my finger which
contacted the bottle. If I smell the (closed) bottle itself, there is no odor. So, I really do think that this is a tiny amount of nitric acid on the
surface and the odor is it denaturing the keratin of my skin. It must be that HNO3 or NO2 gas is very slowly diffusing through the PTFE bottle and
then reacting with humidity in the air to form dilute nitric acid drops on the outside of the bottle. Very interesting!
KesterDraconis: I typically have only a few hours each weekend to do chemistry. I can't afford the time to make reagents right before I need them. I
have stored 35% H2O2 for more than 18 months with no gas buildup (the plastic bottle doesn't even become rigid from pressure inside) BUT I keep it in
the fridge, so that might make a difference. Also, when I recently tested the concentration of it by serial dilution followed by using peroxide test
strips, I got a result which indicated that it is still at or near full strength, so it seems that refrigeration is the way to go for H2O2 storage. I
have not noticed the HNO3 building up very much pressure, even though I store it at room temp.
|
|
ave369
Eastern European Lady of Mad Science
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
That's how I store concentrated nitric acid: in a bottle made of amber glass with a screw-on lid, but the lid is slightly modified. Under it, a coin
tightly taped with PTFE tape from all sides is put. The lid is screwed tightly to ensure that the PTFEfied coin seals the bottle airtightly.
Smells like ammonia....
|
|
greenlight
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 733
Registered: 3-11-2014
Member Is Offline
Mood: Energetic
|
|
I store my vacuum distilled 99% Nitric acid and 30% Hydrogen peroxide in these Schott Duran bottles. Nitric acid in the freezer and Hydrogen peroxide
in a separate section in the refrigerator.
They aren't cheap but have had no problems at all using them.
[Edited on 13-9-2015 by greenlight]
Be good, otherwise be good at it
|
|
KesterDraconis
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 27-3-2015
Member Is Offline
Mood: No Mood
|
|
Oh yes, that will make a it of a difference, I don't have a fridge you see .
|
|
cyanureeves
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
i also have those amber bottles and one of the lids did not make it past 1 month before the middle totally caving in.i stored in another exact bottle
but this time to protect everything else i put the bottle in a plastic coffee container with water in it.i thought it would at least make weak nitric
acid if fumes got out again.the same bottle and cap has been in that folger's can for more than 1yr. now and the water is not acidic.last winter i
opened the bottle and noticed it had turned a light green color and didnt fume at all.this summer i dissolved some gold and the acid was again yellowy
and fuming. i made this acid about three years ago.
|
|
byko3y
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
greenlight, those bottles are dirt cheap, the reason why you've got them for high price is because there's Schott Duran label on them. There's more
expensive and chemically resistant red caps with PTFE and ethylene-trichlorofluoroethylene seal http://www.vtrglass.cz/wpcproduct/bottle-reagent-with-red-sc... (10$ for 1L bottle in my country)
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Quote: Originally posted by greenlight ![](images/xpblue/lastpost.gif) | I store my vacuum distilled 99% Nitric acid and 30% Hydrogen peroxide in these Schott Duran bottles. Nitric acid in the freezer and Hydrogen peroxide
in a separate section in the refrigerator.
They aren't cheap but have had no problems at all using them.
[Edited on 13-9-2015 by greenlight] |
Soring WFNA in such a bottle is fine, although the cap will deteriorate over time. I however, would never store H2O2 in such a tightly sealed bottle.
H2O2 does decompose, even in a fridge and such a thick-walled bottle with thick-walled cap can be a nasty time-bomb. If such a thing explodes, then it
will do a lot of harm!
I store my H2O2 in a bottle with a special cap, containing a check valve. You can easily make this yourself. Take a very fine drill (you can buy very
small ones for drilling miniature holes in printed circuit boards) and make a 1 mm hole in the cap of the bottle and put some sticky tape over the
little hole. This gives adequate protection for overpressure, while at the same time preventing unwanted thermal cycling from air (if the bottle cools
down, then the tape is sucked against the cap and no air can get in). This mechanism works particularly well for H2O2, because this is not corrosive
to the cap and the released gas (oxygen) is not corrosive to the tape.
|
|
greenlight
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 733
Registered: 3-11-2014
Member Is Offline
Mood: Energetic
|
|
@Byko3y, I see I'm paying for the brand name haha, I think I will upgrade the blue cap bottle to a red ETFE sealed one like in your link for my WFNA
from now though.
@Woelen, I have been venting the bottle and pressure is released every time but I will do what u said and drill a hole in it now with tape over it so
i don't have to periodically open it all the time. Thanks for the tip.
[Edited on 14-9-2015 by greenlight]
Be good, otherwise be good at it
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Why use Old, Stored reagents when you can have Fresh, New ones ?
I have some chloroform i made almost a year ago.
To Use it i will have to distill it again.
Storage in that case was pointless - it is not available for use right now, despite being in a bottle.
(yes, it has 1w% ethanol in there to prevent phosgene evolution)
|
|
alive&kickin
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 100
Registered: 10-11-2012
Member Is Offline
Mood: No Mood
|
|
sbreheny, I have some type of film that seems to be resistant to acids and such (Pinkhippo11 testing now). If you want to send him a U2U, to see how
things are working out, I'm sure he wouldn't mind. I would love to send you some so maybe you could put your nitric acid in a glass bottle with this
film stretched over the mouth of the bottle with a plastic cap over that. Not so sure if it would work or not, but maybe worth a try?
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
aga, according to Wikipedia https://en.wikipedia.org/wiki/Chloroform
you do not need to distil your aged chloroform
washing with saturated sodium bicarbonate solution will neutralise both the phosgene and HCl products.
[Edited on 18-9-2015 by Sulaiman]
|
|
ave369
Eastern European Lady of Mad Science
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
Recently re-bottled my fuming nitric acid into a narrow-necked amber glass bottle with a polyethylene bung and some plastic cap over it. It seemed to
me better than the previous one because of the combination of bung and cap providing hermetic sealing. My store-bought hydrochloric acid also comes in
such a bottle.
Anyone encountered severe corrosion of LDPE or HDPE bungs by nitric acid?
Smells like ammonia....
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Just checked: 69% HNO3 in suppliers (APC Pure / Atom Scientific) HDPE bottle
that I bought before September last year, has an expiry date of 7/2019.
I've not yet checked what 'expiry' means in this case.
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
'Expiry' simply means that it might not be exactly 69% anymore, in this case.
Using the word 'Expiry' helps to sell more.
|
|