RareEarth
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 69
Registered: 1-4-2015
Member Is Offline
Mood: No Mood
|
|
Activated Carbon as a fume filter: What DOESN'T it absorb?
I am somewhat petrified that years of knowing about this material and having done so many searches about it, I have been unable to find how it truly
works, or better yet, a list of what it can or can't absorb as a filter medium. The only thing I know about it is that it is highly porous, but I have
never really understood what is "activated" about it.
Simply put, if I have a fume hood leading to a activated carbon filter, whether redirecting back in the lab or outside, what kinds of compounds are at
risk for not getting absorbed by the filter? For mundane things like solvent's, this isn't a big deal. For things that absolutely require a fume-hood,
that are toxic am terrified that of the thought of a significant amount going through the filter unscathed, whether into the outside air for people to
breath, or into my lab.
How are volatile hazardous things actually trapped by activated carbon? Where can I find some confidence for what is safe to rely on such a filter
for?
[Edited on 29-7-2015 by RareEarth]
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I am a complete noob when it comes to carbon filters,
done some reading but no experience, so take with a few mg of NaCl ![:)](./images/smilies/smile.gif)
first, good information and links here https://en.wikipedia.org/wiki/Activated_carbon
e.g. link to one manufacturers adsorption ratings http://www.sentryair.com/activated-carbon-filter.htm
since different carbon sources and different activation processes giving different pores sizes and grain sizes are available
and the amount and type of contaminants already adsorbed is unknown
I suspect that there is no 'correct' answer,
so one approach would be to test your exhaust for expected contaminants,
probably a more complex experiment than the one that is being filtered though !?
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
If you can hold on for a few days, i am about to do a bit of a study of Activated Carbon, as i too was totally unaware of what the stuff actually is.
Generically it is Carbon with a vastly increased surface area.
In that form it seems to adsorb (not absorb) halogens very well, and has an affinity for other elements, such as Sulphur.
The things it adsorbs is determined by how it was 'Activated', and for what purpose.
|
|
RareEarth
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 69
Registered: 1-4-2015
Member Is Offline
Mood: No Mood
|
|
Yes definitely do post again once you have done your study.
Very good to hear about the halogens/sulfur. I would hope phosphorous as well. These fall under the things of hazard, which are oh so useful in the
lab, that I am concerned about. I've always wanted to be able to safely work with various acid gases and the powerful phosphorous and sulfurous
halogenating agents, but I've been somewhat fairly concerned about them slipping through the filter. Included would be a number of highly reactive
lachrymal alkyl halides as well. Things you definitely don't want your filter failing on you for.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Most things are absorbed by charcoal to some extent.
However it's important to realise that the absorption isn't permanent. More important too is the fact that something poorly absorbed can be displaced
by things that stick more strongly. It's possible that some toxic material would stick to the charcoal but be displaced again later by a less toxic,
but more "sticky" material.
That's one reason I'd never trust a recirculating fume cupboard.
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Not to put too fine a point in it, a fume hood should blast the nasty stuff you just made out into the first bit of Nature that is at least 30m away
from you.
Reason being is that Nature can deal with it a whole lot better than you ever will.
As unionised rightly implies, an AC filter is a delaying tactic, not a solution to the problem.
|
|
RareEarth
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 69
Registered: 1-4-2015
Member Is Offline
Mood: No Mood
|
|
Blasting it into nature can't be the typical practice in an industrial setting, is it?
Blasting it outside, "just in case", would be the ideal, scenario, but I would be concerned about passerbyers smelling something strange.
With a home-made filter, activated charcoal can be purchased very cheaply, and could even be replaced on a very frequent basis as to minimize any risk
of any sort of odor-leakage.
|
|
DJF90
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by aga ![](images/xpblue/lastpost.gif) | Not to put too fine a point in it, a fume hood should blast the nasty stuff you just made out into the first bit of Nature that is at least 30m away
from you.
|
Unionised was talking about a recirculating fume hood, where the exhaust is passed through an activated carbon filter before being returned
to the room.
For lab scale research/manufacture, yes it is. But you have to have a scrubber in place if theres potential for release of anything nasty.
For pilot plant, even solvent vapors are monitored, and the place I used to work at had drums of activated carbon on the exhaust of the ventilation
system. The drums were monitored by mass and were changed as required by the SOP.
Quote: Originally posted by RareEarth ![](images/xpblue/lastpost.gif) | With a home-made filter, activated charcoal can be purchased very cheaply, and could even be replaced on a very frequent basis as to minimize any
risk of any sort of odor-leakage. |
Would you really trust your life to home-made PPE? Schott and 3M both sell affordable "half masks" (as do others) and the filters aren't too expensive
if you shop around. A pair of ABEK1 filters can be had for less than a tenner, and depending on usage could last a fairly long time. If you're not
planning on using ammonia, then ABE1 cartidges are even cheaper.
These respirators absorb most nasties, although they're not suitable for use in an oxygen deficient atmosphere (as they only filter nasty stuff out)
and IIRC they're no good for carbon monoxide.
[Edited on 31-7-2015 by DJF90]
|
|
lullu
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 51
Registered: 2-3-2012
Member Is Offline
Mood: No Mood
|
|
A2B2E2K1HGP3 would be a good choice for most amateur chemists, not too expensive and its a good allrounder. I would recommend to go with a fullmasks
they are often very cheap on eBay.
|
|
Tabun
Harmless
Posts: 38
Registered: 17-4-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by lullu ![](images/xpblue/lastpost.gif) | A2B2E2K1HGP3 would be a good choice for most amateur chemists, not too expensive and its a good allrounder. I would recommend to go with a fullmasks
they are often very cheap on eBay. |
You may buy many cheap things and if they fail that's it but don't you simply don't play it like this with gas masks and filters.You will also need to
see if it fits your face.
|
|
lullu
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 51
Registered: 2-3-2012
Member Is Offline
Mood: No Mood
|
|
If you would check that filter you will see that it is perfectly suited you smart a**.
Also I am talking about full masks like Dräger which often come unused from inventorys (at least where I am from) that are not allowed to be used
anymore but were well groomed and are perfectly okay to use. If you have a normal head Dräger Panoramas etc will fit you perfectly.
You are right that one should not save on these issues, still the mentioned filter and a used Dräger fullmask can be aquired for a reasonable budget.
|
|
RareEarth
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 69
Registered: 1-4-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by DJF90 ![](images/xpblue/lastpost.gif) |
Would you really trust your life to home-made PPE? Schott and 3M both sell affordable "half masks" (as do others) and the filters aren't too expensive
if you shop around. A pair of ABEK1 filters can be had for less than a tenner, and depending on usage could last a fairly long time. If you're not
planning on using ammonia, then ABE1 cartidges are even cheaper.
These respirators absorb most nasties, although they're not suitable for use in an oxygen deficient atmosphere (as they only filter nasty stuff out)
and IIRC they're no good for carbon monoxide.
[Edited on 31-7-2015 by DJF90] |
I would trust a home-built filter, but I wasn't talking about recirculating it back into the lab. Even if I was blasting it filtered outside, if I was
working with highly toxic compounds I would still want a mask of some kind. I was debating on getting a supplied-air mask, that doesn't even filter
the air you breath, but compresses air before hand, though, it could be bulky. This way prevents the failure of a mask-filter.
|
|