deadgamer1030
Harmless
Posts: 3
Registered: 25-6-2015
Member Is Offline
Mood: No Mood
|
|
fulminating gold
I was attempting to recover gold from old ram cards. I used NH4NO3 and HCl to make a solution aqua regia. I put the ram in the solution to let
it dissolve. This process took over night. When i went to precipitate the gold with Sodium Metabisulfite no gold precipitated out. I did some research
to find out why nothing was happening. The only thing i could find online was there might be to much nitrate left in the solution and it said to
neutralize it with urea. So in a small test tube i put a small amount of the solution and then added urea. Next i added the Metabisulfite and still
no gold precipitated out. I have noticed a light brown to goldish precipitate at the bottom of the beaker where the solution is kept. Is this
fulminating gold? If so, how to i neutralize it a retrieve the gold safely? i cannot find anything online to handle it safely. Any advice would be
appreciated.
|
|
Marvin
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
It's difficult for anyone to say for sure it isn't fulminating gold but normally this substance is made by adding a strong base and letting the
precipitated oxide/hydroxide steep in a solution containing ammonia. Lack of a caustic base, the acidic and reducing conditions point away. If the
amount is small I'd proceed carefully with eye protection, dry a small amount of the stuff and hit it somewhere well away from the rest. Brown is not
an unusual state for precipitated gold incidentally but it could be other things, copper etc.
|
|
hissingnoise
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
A solution of gold in aqua regia with NH4 will contain fulminating gold!
It is precipitated by adding K2CO3 sol.!
I'd be wary of attempting to reclaim the metal due to FG's reputation . . .
|
|
deltaH
Dangerous source of unreferenced speculation
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
I point you to an excellent review of fulminating gold:
http://publik.tuwien.ac.at/files/PubDat_170506.pdf
From that paper:
Quote: | For safe disposal of fulminating gold, dissolve it in
hydrochloric acid (concentrations > 0.2 M). Dissolution
may consume some time, thus it is advisable to let the
suspension stand for at least 24 hours. Thereafter, only a
little residue might remain undissolved on the bottom of
the beaker. It can be wiped out with a paper towel without
a hazard. |
Be safe and not the general safety advice in that paper:
Quote: |
• If possible, use secondary amines or primary amines with
a large alkyl group (e.g. mono-t-butyl amine) instead of
ammonia to avoid the formation of explosive products.
• Avoid an excess of ammonia (which increases the
product’s sensitivity) in the course of your reaction. Use
as little as possible.
• In your reactions with gold(III) compounds, be aware that
some chemicals may release ammonia, e.g. ammonium
carbonate or urea at elevated temperature.
• Without a major excess of ammonia, the addition of
significant amounts of sodium or potassium cyanide to
the slightly basics solution can prevent the precipitation
of fulminating gold [35, 43]. Be aware of the formation of
very toxic hydrogen cyanide gas from acidic solutions!
• Do not wash the precipitate, neither with water, nor (even
worse) with ammonia solutions or bases. Both leads to
the formation of even more sensitive and explosive
products.
• If you accidentally obtain a precipitate from a reaction of
gold(III) compounds and ammonia, do not dry it, but
keep it moist. Only the dry product is explosive.
• Precipitation in presence of excess amounts of NH4+and/ or Cl–(e.g. NH4
Cl or NH4NO3) leads to a less (in case of Cl–) or not explosive (in case of NH4+) product.
• Do not synthesize or handle larger quantities than 500
mg of fulminating gold.
• Use safety equipment when handling fulminating gold,
such as: safety goggles, face shield, leather coat,
earthening (person and equipment), KevlarTM gloves and
wrist protectors and ear plugs. In general, avoid the use
of glass or metal equipment (e.g. spatula) because of the
possible formation of shards or shrapnels in case of an
explosion. Use plastic beakers and spatula instead. Only
for the drying of wet, freshly precipitated fulminating
gold in the desiccator, the use of a glass beaker has
turned out as practicable, because fulminating gold
tends to adsorb on the bottom of a polypropylene beaker
in the course of drying, from where it can be removed
only by hazardous scratching.
• Avoid friction to the dry product. Remember its high
friction sensitivity. Act in a concentrated way and handle
the product with care and precaution.
|
[Edited on 26-6-2015 by deltaH]
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Jeez.
So a shortcut to get to aqua regia can wind up with an explosive instead of $.
Note to self: go with the nitric & hydrochloric acid method instead.
|
|
deadgamer1030
Harmless
Posts: 3
Registered: 25-6-2015
Member Is Offline
Mood: No Mood
|
|
Next time i try this recovery, I will convert the NH4NO3 to NaNO3 with NaOH. Thanks for the help.
|
|
deadgamer1030
Harmless
Posts: 3
Registered: 25-6-2015
Member Is Offline
Mood: No Mood
|
|
The solution also tests negative with SnCl4.
[Edited on 26-6-2015 by deadgamer1030]
|
|
deltaH
Dangerous source of unreferenced speculation
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
Try dissolving it in 1M HCl overnight, it's simple enough. Gold obviously won't dissolve in HCl. Hope you come right!
|
|
pneumatician
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
before play with chem read some data here and there, do not just repeat what parrots say
from a ebay seller ( minerals-water.ltd):
Lately, sodium sulfate has been found effective in dissolving very finely electroplated micrometre gold that is found in gold electroplated hardware
on electronic products such as pins, and other connectors and switches. It is safer and cheaper than other reagents used for gold recovery, with
little concern for adverse reactions or health effects.
de res.
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
I thought i had heard that somewhere, and prepared some sodium sulphate today (by-product of making GAA)
Do you have any further details other than just to dissolve Gold in Na2SO4 ?
How to get the dissolved Gold out of solution would a useful, for example.
[Edited on 26-6-2015 by aga]
|
|
cyanureeves
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
unless it's alot of gold i'd keep the precipitate in water until i could use it for a plating solution or whatever.this stuff ruined my day one time
and left an abrasion in my eye caused by blast pressure.i let it dry and tried to scrape it out of the bottom of the glass flask it was in.crazy thing
is i was warned in this very forum about precipitating with ammonia but thought it was just alarmists talking.it doesnt take much gold to make this
explosive either.my batch came from just one old computer i believe or maybe rolled gold,i forget which but recall it wasnt much.my sight is more
important than any gold now.
|
|
Marvin
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
Does minerals-water have more details for that sodium sulphate process or is it just the old unreferenced claim from wikipedia?
|
|
vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Quote: Originally posted by Marvin ![](images/xpblue/lastpost.gif) | Does minerals-water have more details for that sodium sulphate process or is it just the old unreferenced claim from wikipedia?
|
I think that was a joke or some kind of silly error by some e-bay dude.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7991
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Sodium sulfate cannot be used for precipitating gold. Sodium sulfite can be used for that purpose. There only is one letter difference in the name of
the chemical, probably that leads to the confusion.
If precipitating gold, keep pH sufficiently low. This keeps nearly all other metals in solution and prevents precipitation of dangerous unstable
compounds.
|
|
Marvin
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
Allegedly sodium sulphate is for dissolving gold, not precipitating. It's exists as an unreferenced contribution from an unregistered user on
wikipedia in 2007. Minimally it appears to be out of context.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7991
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
How could sodium sulfate dissolve gold? Sodium sulfate is a really dull chemical, even table salt is more reactive.
|
|
Dan Vizine
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 628
Registered: 4-4-2014
Location: Tonawanda, New York
Member Is Offline
Mood: High Resistance
|
|
Perhaps they meant sodium hydrogen sulfate? Seems to me I've heard of this somewhere? Sounds like a high temp process?
The solubility of noble metals is a funny thing, though. While you can't dissolve gold in HCL, gold alloys will dissolve. Electrum dissolves in HCl
/NaCl. But that isn't a focus here, the gold is present as gold, not an alloy.
Economics is the real killjoy. A currently heard statistic is that 300 to 400 lbs of computers will give an ounce of gold. How many hours are you
going to invest in pulling them apart, disposing of the carcasses, processing the boards, purifying the resultant mess? How many dollars will it cost
for chemicals, equipment? I heard this really only becomes worthwhile at ton levels. It may be interesting, but it's no "get-rich-now scheme".
Oops, just noticed you said RAM cards. Higher gold/lb ratio, but do you really have the vast number you'd need to make it worthwhile?
[Edited on 29-6-2015 by Dan Vizine]
"All Your Children Are Poor Unfortunate Victims of Lies You Believe, a Plague Upon Your Ignorance that Keeps the Youth from the Truth They
Deserve"...F. Zappa
|
|
pneumatician
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
ironically I say "do not just repeat what parrots say" and making a low search 99% of people say the exact words:
"Lately, sodium sulfate has been found effective in dissolving very finely electroplated micrometre gold that is found in gold electroplated
hardware..." LOL!!!! ![:D](./images/smilies/biggrin.gif)
well, and now seriously this appeard to be a "secret" process or patent and is useless the claims of all this people unless you know the procedure.
but sodium sulfate DISSOLVE GOLD, PERIOD.
I don't post the procedure, I thing people can find by himself, if nobody found the process, perhaps...
really in all the thousands of fat books of chem floating around nobody say anything about this????
Warning, this disquisition, of course, is not suitable for people brainwashed.
------------
Do not believe anything
because it is said by an authority,
or if it is said to come from angels,
or from gods,
or from an inspired source.
Believe it only if you have explored it
in your own heart
and mind and body
and found it to be true.
Work out your own path,
through diligence.
Gautama Buddha
----------
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
OK, for guys whose true avocation is gold mining, I guess we can accept an omission of a few letters. Here is Wikipedia on Gold extraction via Sodium
thiosulfate (link: https://en.m.wikipedia.org/?title=Sodium_thiosulfate ):
"Sodium thiosulfate is a component of an alternative lixiviant to cyanide for extraction of gold.[6] However, it forms a strong soluble complex with
gold(I) ions, [Au(S2O3)2]3−. The advantage of this approach is that thiosulfate is essentially not toxic and that ore types that are refractory to
gold cyanidation (e.g. carbonaceous or Carlin-type ores) can be leached by thiosulfate. Some problems with this alternative process include the high
consumption of thiosulfate, and the lack of a suitable recovery technique, since [Au(S2O3)2]3− does not adsorb to activated carbon, which is the
standard technique used in gold cyanidation to separate the gold complex from the ore slurry."
What is curious is that it can be prepared by heating an aqueous solution of sodium sulfite with sulfur. Also, on heating the dry salt to 300 °C, it
decomposes to sodium sulfate and sodium polysulfide:
4 Na2S2O3 → 3 Na2SO4 + Na2S5
There exists also soiled based sulfur reducing bacteria that attacks Na2SO4, so I would not be too shock if there is actually a connection between
Gold extraction and a Sulfur source from any of the three cited compounds, Na2S2O3, Na2SO3 and Na2SO4.
The above problems cited by Wikipedia on the thiosulfate route, however, leaves doubt in my mind as to whether it constitutes a good alternative
lixiviant.
[Edited on 30-6-2015 by AJKOER]
|
|