Gargamel
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 166
Registered: 9-3-2013
Member Is Offline
Mood: No Mood
|
|
Ammonium nitrate anti cake for milling
My experience with milling AN is that it tends to cake when it is milled down.
Some lumps always avoid the blades of coffee grinders or kitchen blenders employed for the task, or stick to the ballmills walls.
Especially when it's not 100% dry, or the prills are waxed.
I found that with certain other crystalline materials anti cake helps a lot.
How about AN, what is your experience, what do you use and how much?
(I've got Silicon dioxide powder and I'd start with 0,5%)
[Edited on 6-6-2015 by Gargamel]
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Gargamel
You are awesome... because I was going to ask this question myself... so I am looking forward to answers everyone!
Even when I use a coffee grinder to grind Activated AN it still cakes.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
MgO is often used as an anti-caking agent. Cheap, quite inert and non-hygroscopic.
Talcum powder is another. Very OTC.
[Edited on 6-6-2015 by blogfast25]
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
My experience is that many if not all dry, non-caking powders have an effect. Fumed silica (cab-o-sil or whatever) are often used, but anything that's
compatible can be used. FOr instance KNO3 kan often be milled with a pinch of airfloat charcoal if it's to be used for pyrotechnics, and it really
improves milling. Things like MgO might affect pH and/or reactivity, so first you should consider the final application. Anything inert should be fine
of course unless you're looking for pure colors, in that case solids might cause them to wash out somewhat. .
We're not banging rocks together here. We know how to put a man back together.
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
MgO will react with NH4NO3 to form Mg(NO3)2 accompanied by evolution of ammonia. At low moisture content it could work well as an anti-caking agent,
but probably only up to a point of increasing moisture absorbed where it could cake again and maybe worse than would occur for the NH4NO3 alone.
One of the most interesting things I have found is the possibility of mixed nitrate eutectics which can form a melt at reasonably low temperature that
can completely dehydrate as a eutectic mixture the usual highly hydrated nitrates that alone almost defy complete dehydration by heating even assisted
by vacuum. Some of those eutectic melts will dehydrate completely but when cooled will set up as a solid monolithic glass. But there are variations
on such compositions which will instead on cooling crystallize as a fine microcrystalline loose powder so that the result is a nitrate mixture having
zero moisture that was "self milling" to produce a fine mesh anhydrous mixture of nitrates that is homogenous. Such mixtures could be useful as
oxidizers in propellants or pyrotechnics, or could be useful in nitration schemes.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
You are right, MgO is not well suited. I remember trying a mixture of AN and Mg/MgO/Mg(OH)2 once, it started reeking of ammonia pretty quickly. This
was magnesium dust collected from a wet dust-collector connected to a belt sander for Mg-alloys...
We're not banging rocks together here. We know how to put a man back together.
|
|
Gargamel
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 166
Registered: 9-3-2013
Member Is Offline
Mood: No Mood
|
|
Well, I've got some prilled fertilizer here, and it milled fine even without additional anti-cake.
Trying a second batch with added silicon dioxide behaved identically. What leads me to believe there already is something in there...
I dissolved some, result:
-very few white flakes swimming on top - paraffine or something.
-everything else is soluble
-no smell at all.
The supplier mentions there is Magnesium nitrate in there, and that this is for anti-cake purposes. So I think I got what is called "stabilized" AN.
I'll see how the milled powder behaves over time, would be really great if this actually keeps the powder shape in storage.
|
|
jock88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
http://www.ebay.co.uk/itm/Excalibur-E072-Food-Dehydrator-Sol...
What is a food dehydrator and could it be used for drying salts etc?
|
|
Amos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
I think you answered the first question just by naming the device. It uses a stream of heated air to dry food. I actually have a cheap (~$35) one that
I use all the time for chemistry. It's great for drying filter residues and crystals.
|
|