Fulmen
International Hazard
Posts: 1726
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
New toy (Reicherter Rockwell tester)
I really don't have space for it, but how often does something like this come along for free?
Now I just have to learn how to use it...
We're not banging rocks together here. We know how to put a man back together.
|
|
|
Fulmen
International Hazard
Posts: 1726
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
I think I have this figured out, I'm getting fairly even and plausible results on test pieces. I got some calibration blocks as well, but I don't want
to waste them until I am sure I know what I'm doing. There is an instruction placard that comes with it, but due to it's fragile nature I want to have
a glass frame ready for it before I pick it up.
I really wish I could get my hands on the relevant ISO (or ASTM) for this, but I can't afford spending money on that right now. I am especially unsure
about soak times at each stage...
I could also use a good text on the relationship between Rockwell and tensile strength, the charts out there do wary a bit. This unit has 63.5, 100,
150 and 187.4kg weights, and it comes with the diamond indenter as well as 1/16" and 2.5mm steel balls. This makes for a pretty wide measuring range
if there is correlation factors and tables available.
[Edited on 27-4-15 by Fulmen]
We're not banging rocks together here. We know how to put a man back together.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Fulmen  |
I could also use a good text on the relationship between Rockwell and tensile strength, the charts out there do wary a bit. This unit has 63.5, 100,
150 and 187.4kg weights, and it comes with the diamond indenter as well as 1/16" and 2.5mm steel balls. This makes for a pretty wide measuring range
if there is correlation factors and tables available.
|
Going by other hardness testers (Shore A and Shore D) I've first hand experience with, Rockwell results should correlate much better to elastic
modulus than to tensile strength.
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Looks like it's meant for Metal hardness, as in Steel.
Cool thing to have for free !
However, i'm the same with Space : i'd have nowhere to put it, and have never had a use for one.
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
Pretty awesome.
|
|
|
Fenir
Hazard to Self
Posts: 68
Registered: 7-5-2013
Member Is Offline
Mood: No Mood
|
|
Congratulations on your equipment, it would be interesting to test various stainless steels and compare them to tool/carbon steels.
|
|
|
Fulmen
International Hazard
Posts: 1726
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Blogfast: Rockwell should correlate fairly well with yield strength. It measures permanent deformation after the load has been released while
durometers IIRC measure deformation during load. It's not as good as say Vickers, but it's far simpler to perform.
Couldn't come at a better time as I'm doing a bit of case hardening at the moment.
We're not banging rocks together here. We know how to put a man back together.
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
They are used at the viagra factory too 
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
