Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Molybdenum at home
Hi guys!
Recently I found a can of dry lubricant which - according to the label - contains molybdenum disulfide - MoS2. My question to all the mad
scientists here would be: what would be the best way to convert it into Mo
powder? I know that the MoS2 is dissolved is some kind of solvent inside the can but getting it out as a powder shouldn't be too hard..
I've read many articles on the Internet from which I've learnt that a viable way would be oxidising it to Mo(VI) - MoO3 using the
O2 in the air at elevated temperatures and then reduce it back into Mo(0) using either hydrogen as a reductant or using an aluminum
thermite reaction to reduce it.
What do you think? 
Alzador
|
|
woelen
Super Administrator
       
Posts: 8071
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
MoS2 is exceptionally inert. I have so-called molycote, which is pure MoS2 in the form of a powder, which has a peculiar greasy feeling and is a
perfect lubricant on its own (no solvent or oil is needed for that). I tried dissolving this and could not get it dissolved, not even in warm conc.
HNO3.
Probably the only way to have it reacted is burning it in air, giving MoO3. I also think that reducing this to the metal will require non-aqueous
chemistry at high temperatures. It would be an interesting experiment, but I also want to warn you. MoO3 is quite volatile and a lot of it will
evaporate when e.g. mixed in a thermite reaction. You will lose a lot of Mo and you must be very careful not to inhale the metal-containing smoke.
If your goal is to learn something and see whether you can perform this kind of non-aqueous chemistry at high temperatures, then this endeavor
certainly is worth the effort. If your goal is to obtain pure molybdenum metal, then I would suggest you to simply buy it. It can be purchased online
(e.g. eBay) for reasonable prices.
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Thank you for the fast reply!
My goal with this would absolutely not be to obtain 99.99% pure Mo metal as I don't have the means to produce that, and as you said buying it would be
much more reasonable . I just want to explore the chemistry of producing a
not-so-everyday metal from things that can be easily bought in a store. To me Mo is a metal that I don't come by everyday and it would be interesting
to make some chemically by myself .
I've read that MoS2 is really inert that's why I want to try oxidising it up. Then the oxide could be reduced into the metal. The major problem is
here. If reduction happens by a thermite reaction then as you said all kinds of evaporations would happen and the yield would be low not to mention it
would be mixed with a bit of Al2O3 which also has to be be removed.
Other than that I only know the H2 reduction method but as of now I can't really produce H2 gas safely and I don't want to risk
an explosion xD. Do you know any other means to reduce the oxide?
|
|
woelen
Super Administrator
       
Posts: 8071
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
For some metals, reduction with carbon can be used, giving CO and the metal. You usually have to assure that excess metal oxide is used, otherwise the
excess carbon dissolves in the metal. I can imagine that molybdenum can form very hard and inert carbides. I know of tungsten carbide being formed in
this way, and molybdenum is the lighter congener of tungsten, so maybe this metal can also form such carbides.
I, however, expect that VERY high temperatures are needed for carbon-reduction. This may be a serious problem in an amateur/home setting.
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
yes :/ i'm aware that carbon reduction is not an option at home. I think I should go with hydrogen reduction but I will have to find or make an
apparatus for producing and containing the gas. I have access to Zinc and hydrochloric acid, I only have to find a not so expensive way to get the
hydrogen to the molybdenum oxide.
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by woelen  | MoO3 is quite volatile and a lot of it will evaporate when e.g. mixed in a thermite reaction. You will lose a lot of Mo and you must be very careful
not to inhale the metal-containing smoke.
|
With a BP of 1155 C that's not a real problem.
The real problem is slag/metal separation: the MP of Mo is 2623 C! Is there enough heat in that thermite to reach that temperature, thus allowing
slag/metal separation?
[Edited on 28-1-2015 by blogfast25]
|
|
woelen
Super Administrator
       
Posts: 8071
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
In this context, 1155 C is not a high temperature at all. Thermite reactions can become VERY hot, 2000 C are not uncommon and then you will get a lot
of evaporation of MoO3.
Even normal iron thermite goes well above the melting point of iron (which is nearly 1600 C) and I believe that it goes over 2000 C, if I look at the
low viscosity of the molten iron and the amount of light, emitted by the iron.
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
woelen:
For aluminothermic reductions to yield any useful metal their end temperature needs to exceed the MP of alumina (2072 C) by at least a couple
of hundred C (but higher tends to better). This does not impede the use of relatively volatile heat boosters like KClO<sub>3</sub> (e.g.
for Ti, V, Cr and Nb preparations) as very effective heat boosters. The 2000 C you mention is in fact too low.
The aluminothermic reduction reaction proceeds along a reaction front (or zone), it's not as if the mixture is heated to end temperature all at once.
In the aluminothermic reduction of silica, sulphur + extra aluminium is used to boost heat output and reach the required, say 2500 C. Sulphur has a BP
of only 445 C but I can assure you no sulphur boils off in that reaction.
On those grounds I don't expect the relative volatility of MoO3 to pose any problems.
[Edited on 28-1-2015 by blogfast25]
|
|
Oscilllator
National Hazard
  
Posts: 659
Registered: 8-10-2012
Location: The aqueous layer
Member Is Offline
Mood: No Mood
|
|
Blimey, it looks like somebody else has done a molybdenum thermite, and with some success too!
I wonder if thermites with plain sulfides work? I imagine they do, but there's only one way to find out...
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Well thank you for your thoughts I'm going to try the aluminothermic way in the
next few days and I will certainly keep you up to date 
Peace
Alzador
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Blimey, I'm the thermite nut here, how could I forget that post!! Well f*cking done!
Oscillator, slag/metal separation (yield!) would almost certainly benefit from adding a slag fluidiser like CaO or CaF2 (fluorite).
Sulphides thermites would not work so well because the Heat of Formation of Al2S3 is much, much lower than that of Al2O3.
St HoF Al2O3 = - 1676 kJ/mol
St HoF Al2S3 = - 651 kJ/mol (less than half)
For a general sulphurous aluminothermic reduction:
MSx + 2x/3 Al === > M + x/3 Al2S3
... the heat of reaction would be much smaller, all other things being equal. The end temperature would be much lower. It could work in some specific
cases, maybe CuS, PbS, CdS and such like.
[Edited on 29-1-2015 by blogfast25]
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Could you explain how slag fluidisers work?
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
When the thermite reaction is over (and assuming the mixture was well designed) the metal and slag (alumina) are both present in the liquid state.
That mixture is comparable to an oil/water mixture because the molten metal isn't soluble in the molten alumina.
As the mixture cools down rapidly, gravitational separation takes place, with the denser metal sinking to the bottom. This process is greatly sped up
if the viscosity of the molten slag is lower.
CaF2 is an inert material (in this context) with a relatively low MP (1418 C) and a high BP (2533 C). It reduces the viscosity of molten alumina
significantly, depending of course on dosage.
CaO works slightly differently. It too is inert (in this context: is not reduced by aluminium) but with alumina it forms a series of low melting
calcium aluminates, which also reduce the viscosity of the alumina slag:
http://en.wikipedia.org/wiki/Calcium_aluminates
And slag fluidisers have another advantage: the cooled slag (essentially annealed alumina) is somewhat softer, making metal recovery easier.
No industrial aluminothermic reductions are performed w/o slag fluidisers, better known as fluxes.
[Edited on 30-1-2015 by blogfast25]
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Thank you very much for the thorough explanation I will post pics when I will
obtain results. 
Alz
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Yes, you MUST.
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Well.. here you can see my source of MoS2: a red can of rust dissolver/lubricant. Sadly It doesn't write the exact compunds of which the
stuff is made of but MoS2 is surely there. I sprayed out quite a bit of the stuff in a plastic cap and saw that the dark greenish black
molybdenum sulfide is in some kind of carrier fluid in a very small particle size.
Currently I am waiting for the fluid to evaporate, only then will I be able to do anything to it. Also the small particle size worries me a bit too...
:/ What do you think? 
Alz
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
The liquid is a light oil of course, it will take till Kingdom come to evaporate that.
Dilute your product with white spirits (or similar), allow to stand (or filter, if granulometry allows), decant off liquid. Repeat a few times. Then
wash with hexane or cyclohexane a few times, then dry.
That should mostly MoS2.
[Edit: reference to oxidation with peroxide removed. Probably not practical/feasible]
Oxidise to MoO3 by roasting: heat very strongly with plenty air oxygen present:
MoS2 + 7/2 O2 === > MoO3 + 2 SO2
[Edited on 3-2-2015 by blogfast25]
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Could other solvents be used to wash the solid from? Pentane or Heptane? Or something more polar like ether? Hexane and other alkane solvents are a
bit expensive for me at this time ^^".
|
|
Oscilllator
National Hazard
  
Posts: 659
Registered: 8-10-2012
Location: The aqueous layer
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Alzador  | Could other solvents be used to wash the solid from? Pentane or Heptane? Or something more polar like ether? Hexane and other alkane solvents are a
bit expensive for me at this time ^^". |
Anything nonpolar with a low boiling point will work. In the past I have just skimmed a low boiling fraction (<80°) off some of the petrol that
goes in my lawnmower. Works fine.
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
That sounds really nice but I don't know how to catch the low boiling vapours for separation from the rest. :/ I only have a few beakers and things a
normal person would have at home.
EDIT: I managed to find 30-40°C petroleum ether cheap I think that could be
used for washing..
[Edited on 4-2-2015 by Alzador]
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Totally. See if it filters OK.
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Will do but I highly doubt it that I could filter it off..it's particle size is extremely fine.. I think that I would be needing filter paper that is
used for BaSO4 :/
|
|
blogfast25
International Hazard
   
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
There's nothing like trying it though.
If it fails, a series of decantations will work: MoS2 is pretty dense. Then dry.
|
|
Alzador
Harmless
Posts: 19
Registered: 20-1-2015
Member Is Offline
Mood: No Mood
|
|
Well since I only have coffee filter atm at home I highly doubt it will filter
but once I get my hands on petroleum ether I will post again.
Until then farewell Gentlemen..
|
|