nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
Hybrid aqua regia from NaNO3?
Hi, i have for a few months collected old circuit boards, and other electronic parts thats plated with gold and silver, and now i think that i am
ready to harvest.
I am going to dissolve it into aqua regia, but i dont have access to any nitric acid, and heard that it is possible to make some sort of NaNO3 aqua
regia hybrid.
Someone knows how to prepare this, and preparation of NaNO3?
Thanks in adance.
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Quote: Originally posted by nannah | Hi, i have for a few months collected old circuit boards, and other electronic parts thats plated with gold and silver, and now i think that i am
ready to harvest.
I am going to dissolve it into aqua regia, but i dont have access to any nitric acid, and heard that it is possible to make some sort of NaNO3 aqua
regia hybrid.
Someone knows how to prepare this, and preparation of NaNO3?
Thanks in adance.
|
You are inquiring about "Poor man's aqua regia", made by dissolving a nitrate salt in strong HCl:
http://www.sciencemadness.org/talk/viewthread.php?tid=16232
You have to get the nitrate salt from somewhere, either NaNO3 or KNO3 usually. I can get KNO3 as a "stump remover" from my local Bog Box harware
store. You can order either nitrate from Elemental Scientific or a pyro supplier (Firefox, Skylighter, etc.), among others.
|
|
nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by careysub | Quote: Originally posted by nannah | Hi, i have for a few months collected old circuit boards, and other electronic parts thats plated with gold and silver, and now i think that i am
ready to harvest.
I am going to dissolve it into aqua regia, but i dont have access to any nitric acid, and heard that it is possible to make some sort of NaNO3 aqua
regia hybrid.
Someone knows how to prepare this, and preparation of NaNO3?
Thanks in adance.
|
You are inquiring about "Poor man's aqua regia", made by dissolving a nitrate salt in strong HCl:
http://www.sciencemadness.org/talk/viewthread.php?tid=16232
You have to get the nitrate salt from somewhere, either NaNO3 or KNO3 usually. I can get KNO3 as a "stump remover" from my local Bog Box harware
store. You can order either nitrate from Elemental Scientific or a pyro supplier (Firefox, Skylighter, etc.), among others. |
Yeah, that is it.
What's "stump remover"? Used for blowing away tree stumps out of the ground?
Do they sell that to the general public where you live, careysub?
I must say that i am a little bit of a wimp in the way that im hesitant with ordering chemicals that are "precursors" to explosives, or that are
explosive be themselves. With my luck, they would probably go off at the post office, and get me into some serious trouble. :/
So if someone know of, and would recommend a safe and easy way to make the NaNO3, i would be most greatful.
I guess i have to buy or make some nitric acid, right?
Thanks.
Ps. I am thinking of experimenting a bit with the recovered Au. Does anybody have some suggestions on what Au salts that can be fun to make, and
experiment with?
/Nannah.
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Well if the current discussion on obtaining nitrates from faeces is anything to go by, the general consensus is that it is a while lot easier to buy
some sodium or potassium nitrate than to make it from primary sources. It is possible to make nitric acid from fertilisers that contain a reasonable
quantity of nitrates. Nurdrage has a nice Youtube video on making nitric acid that is a good primer on the subject. It does generally depend on
having some sulfuric acid available though. It might be easier to simply buy some nitric acid if that is what you actually need.
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
No matter how unlucky you are, KNO3 will never explode by itself. NaNO3 is slightly less stable, but both are safe.
No, the KNO3 in stump remover aids in the decomposition of plant material, not used to blow tree stumps outta the ground!
I just bought this 5lb lot of potassium nitrate on eBay for $13.50 with free shipping. It came in just 4 days during Thanksgiving weekend.
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Quote: Originally posted by nannah |
What's "stump remover"? Used for blowing away tree stumps out of the ground?
Do they sell that to the general public where you live, careysub?
|
Potassium nitrate is a highly soluble fertilizer and nitrogen source, you drill holes in the stump pour in the product, and it provides nitrogen to
enable microorganisms to digest the wood, speeding decay.
Type "stump remover" into Google. Most of the products returned (but not all of them) are potassium nitrate. Spectracide, the "Hi Yield" brand at
Walmart, etc.
Go to your local hardware/gardening center at look at the labels on the stump remover products.
Here in California I can even buy 50 lb bags of the stuff for $25 or so, no questions asked if I go to a farm supply outfit.
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
IIRC ,instant cold packs contain ammonium nitrate ( NH4NO3 )
and myst 32 has a video to distill nitric acid from concrete cleaner
https://www.youtube.com/watch?v=S6GpMQ98u8I
there is a thread on gold here ,if you are interested
http://www.sciencemadness.org/talk/viewthread.php?tid=41465
i am not very familiar with the process of extracting gold from circuit boards,but could lugol solution be an alternative to aqua regia or is lugol
solution only used to extract colloidal gold from clay particles during field tests ?
http://www.sciencemadness.org/whisper/viewthread.php?tid=217...
http://www.sciencemadness.org/talk/viewthread.php?tid=21769
also ,nitric acid is not the only oxidizer that can be used
strong hydrogen peroxide will also work,but a lot of the peroxide will decompose
in another thread ,i had asked whether chloric acid(potassium or sodium chlorate +acid) could be used as a replacement for aqua regia
one of the members said that it would be too unstable,and the discussion was closed
[Edited on 4-12-2014 by CuReUS]
|
|
Fantasma4500
International Hazard
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
chloric acid.. once happened to decide to wash a granite mortar with some weak acid and suddenly it popped and cracked loudly
after having washed it totally i realized the granite had been etched abit in the bottom, i think chloric acid really do have some really useful
properties
recall +30% concentration is said to be capable of spontanous detonation (''spontanous'') aswell as its said to decompose into perchloric acid (and
ClO2?)
if you can manage the concentration (5%??) it should be doable
anyhow -- OP..
aqua regia is 3:1 HCl:HNO3
HCl forms with fx KNO3 HNO3
so just use massive excess HCl and you should have some aqua regia formed
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
I sometimes use chloric acid (hydrochloric acid and sodium chlorate) to clean glassware. It's quite aggressive.
|
|
nannah
Hazard to Others
Posts: 136
Registered: 20-12-2013
Member Is Offline
Mood: No Mood
|
|
I live in EU, and i dont know if we can buy any nitrates otc here. Are there any europeans here that know of any otc sources over here?
I have thought about ordering nitric acid from the uk, and hope that the customs doesnt take it, but that just seems like such a headache for me.
I think i will wait doing this for a while, and pick up on it in the future.
I would like to thank everyone for the help. I appreciate it.
|
|
dermolotov
Hazard to Others
Posts: 114
Registered: 13-12-2014
Location: Toronto, Canada
Member Is Offline
Mood: Free
|
|
What one always forgets is that all necessary precursors are available.
I believe the restrictions of getting HNO3 for private companies as myself is around 500cc. But they don't restrict Sulphuric Acid and only restrict
NaNO3 or KNO3 to 2.5 kilogrammes.
If you have easy access to Nitrate salts (be it Sodium, Potassium, Barium, Calcium, etc) you can technically just make 70-90% Nitric Acid from a
simple distillation of the Acid+ Salt solution. The less water you have in the reaction vessel, the higher the concentration. You can get a relatively
pure Fuming Red nitric acid that way that one can dilute down to get the stable 65-70%.
Theoretically, you can also use poor man's Sulphuric Acid (Sodium bisulphate) which is readily available in pool supply shoppes. The bisulphate is
technically the weak monoprotic acid of sulphuric acid if used properly and can be used to make Hydrochloric Acid. Unsure if it can be used to
generate NO2 or HNO3.
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
It will generate nitric acid, but it requires higher temperatures (it needs to melt and dissolve the nitrate salt). This causes more decomposition of
the nitric acid.
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
But yields can be increased with vacuum.
|
|
zenosx
Hazard to Others
Posts: 188
Registered: 7-7-2012
Location: East TN / Near Oak Ridge
Member Is Offline
Mood: Awaiting Results....
|
|
In my experience using ammonium nitrate + H2SO4 distilling to HNO3 produced horrible yields and I later read that it can be prone to detonation (not
sure how reliable that source was). Either way, the yield from NH4NO2 compared to KNO3 was very noticeable.
If you don't feel comfortable even purchasing stump remover, I would be leery of pushing you to distill HNO3 from it and a strong acid. NO2 fumes are
very prevalent if not done either slowly or with a vacuum, and pulmonary edema is no laughing matter.
A 2 second search lead me to an alternate forum that might help you out
http://goldrefiningforum.com/~goldrefi/phpBB3/viewtopic.php?...
This entire forum is dedicated to refining gold from used parts.
Have fun and Be Safe
A question that sometimes drives me hazy: am I or are the others crazy?
Albert Einstein
|
|