| Pages:
1
2 |
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
Scientific glassblowing students for hire or trades. Want something made?
Hello, there. I'm a 2nd year student in the Scientific Glass Technology program at Salem Community College, and I would like to offer the services of
myself and my fellow classmates to anyone who needs glass equipment/apparatus manufactured. We are all just starting out our careers for the most
part, and could easily offer services at a price (or equivalent trade) much less than common manufacturers. Our instructors all have extensive
experience in the industry, and we will be running all manufactured products through them for quality control. We would all really like the
opportunity to get some experience working directly with researchers. We are located in southern New Jersey.
Thank you all for taking the time to read this, and please keep doing what you do so we can keep doing what we do.
[Edited on 11-10-2014 by theglassguy]
[Edited on 11-10-2014 by theglassguy]
[Edited on 11-10-2014 by theglassguy]
[Edited on 12-10-2014 by theglassguy]
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
Very cool opportunity! I am glad to see you all offer assistance.
|
|
|
Little_Ghost_again
National Hazard
Posts: 985
Registered: 16-9-2014
Member Is Offline
Mood: Baffled
|
|
what would a replica of philip harris fermentor vessel cost? Just the glass I mean
Like this
http://www.ebay.co.uk/itm/Philip-Harris-Lab-Fermenter-Kit-wi...
|
|
|
Oxirane
Hazard to Self
Posts: 92
Registered: 19-9-2014
Member Is Offline
Mood: No Mood
|
|
Hmm, a reactor-type glass vessel with large opening and head with multiple(3-5) ground joint sockets would be very nice!
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Try simples : 3-neck 250ml 24/29 ground glass joint RBFs
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Soxhlet extractor with flask
and condenser might gather some interest.
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
Thank you very much for your interest Liitle_Ghost_Again.
Looks like the vessel is typically priced at $188 USD, based on your link.
I think $70 plus shipping would be fair.
Though I can't seem to find exact specs for the piece online. It seems to be five threaded O-ring joints on top (four surrounding the central joint on
top, bottom, left and right, and one central joint with a hose connection slightly under the threads.), and two on the body toward the top (one at a
45 degree angle).
Would you happen to know any specs for this piece? (height/outer diameter/inner diameter/internal pressure needs) Are there any specs. I'm not
thinking of?
I hope this works out. This sounds like a very exciting project.
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Oxirane  | | Hmm, a reactor-type glass vessel with large opening and head with multiple(3-5) ground joint sockets would be very nice! |
Thanks for your interest Oxirane! I believe we could accomplish what you are asking for in the range of $50-$70. Depending on the number of ground
joints. Are you looking for something with a detachable head/flange connection?
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
Thank you, aga. That helped me a great deal.
|
|
|
Oxirane
Hazard to Self
Posts: 92
Registered: 19-9-2014
Member Is Offline
Mood: No Mood
|
|
Reactor type vessel is quite like this:
http://3.bp.blogspot.com/-cOPUT9rZU1E/UfYQKFqigtI/AAAAAAAAAT...
It is technically a huge test tube, which can be as simple as it is, or then very complicated and expensive piece of craftwork. The end seal can be
done with PTFE gasket and two clamp rings with threads that close the apparatus, or sometimes the whole opening is just a huge ground joint, and the
top unit contains the smaller joints where dropper funnels, stirrers, temp meters, vacuum adapters, distillation bridges and everything else is
inserted. The vessel may contain a drain tube, so it works as a separatory funnel too. The more expensive ones contain a mantle that can be filled
with liquid for cooling or heating.
http://i01.i.aliimg.com/img/pb/283/834/404/404834283_704.jpg
I was thinking of something in volume of 4-5 liters.
[Edited on 11-10-2014 by Oxirane]
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
This is actually a favorite project amongst students. We could probably do the whole setup for around $90-$120 plus shipping, depending on the type of
condenser and size of the joints. I will get some photos of some we have done and post them in the near future.
[Edited on 11-10-2014 by theglassguy]
|
|
|
Loptr
International Hazard
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
What sorts of apparatuses are you capable of producing? I interested in some larger 19/22 round bottom flasks, reflux and distillation columns, etc.,
and all in 19/22 standard size joints. Also, vacuum manifolds would be nice, along with boiling point and capillary tubes.
If I can get some of these cheaper from you, then why not!? I just ordered a 1L single-neck round bottom flask from UGT, and they are offering me a 2L
for ~$78, which isn't the most enticing at the moment.
|
|
|
Texium
Administrator
Posts: 4618
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Would it be possible to purchase a single 29/42 ground glass stopper? I might be able to think of something else I'd like to buy so that I wouldn't
have such a tiny order, although I have almost all of the glassware that I need.
Edit: possibly an angled vacuum takeoff. I have a vertical one, but I think an angled one would be more useful to me.
[Edited on 10-12-2014 by zts16]
|
|
|
Blue Matter
Hazard to Others
Posts: 107
Registered: 20-6-2013
Location: US
Member Is Offline
Mood: Optimus
|
|
How much would a 24/40 500ml solvent distillation head cost me?
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Oxirane |
Reactor type vessel is quite like this:
http://3.bp.blogspot.com/-cOPUT9rZU1E/UfYQKFqigtI/AAAAAAAAAT...
It is technically a huge test tube, which can be as simple as it is, or then very complicated and expensive piece of craftwork. The end seal can be
done with PTFE gasket and two clamp rings with threads that close the apparatus, or sometimes the whole opening is just a huge ground joint, and the
top unit contains the smaller joints where dropper funnels, stirrers, temp meters, vacuum adapters, distillation bridges and everything else is
inserted. The vessel may contain a drain tube, so it works as a separatory funnel too. The more expensive ones contain a mantle that can be filled
with liquid for cooling or heating.
http://i01.i.aliimg.com/img/pb/283/834/404/404834283_704.jpg
I was thinking of something in volume of 4-5 liters.
[Edited on 11-10-2014 by Oxirane] |
That sounds like quite the project. I think it's possible, and I would love to do it (or more than likely, find a student better at large vessels on a
lathe). Though I'm having a hard time pricing this, because I really have no idea how much this would normally cost. I'm searching online, but I'm
having a hard time finding something comparable. I'm going to look at a few glass catalogs, and get back to ya soon. I think I have a pretty good idea
of what you are talking about.
|
|
|
Blue Matter
Hazard to Others
Posts: 107
Registered: 20-6-2013
Location: US
Member Is Offline
Mood: Optimus
|
|
Oxirane, a gasket and clamp set is around 500 dollars if you are looking at a large one.
|
|
|
Bikemaster
Hazard to Others
Posts: 120
Registered: 8-10-2008
Member Is Offline
Mood: No Mood
|
|
Just to give you an idea of the price of these type of vessels : http://glass.quarkglass.com/category/reaction-flask-2
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Loptr | What sorts of apparatuses are you capable of producing? I interested in some larger 19/22 round bottom flasks, reflux and distillation columns, etc.,
and all in 19/22 standard size joints. Also, vacuum manifolds would be nice, along with boiling point and capillary tubes.
If I can get some of these cheaper from you, then why not!? I just ordered a 1L single-neck round bottom flask from UGT, and they are offering me a 2L
for ~$78, which isn't the most enticing at the moment. |
We mainly focused on different techniques as opposed to full on products. five bends to this degree here, side seal there, 24/40 joint on the other
end, that sort of thing. As far as full on components to an apparatus goes: wev'e done coil condensers, vigreux columns, Allin condensers, cold
fingers, liebig condensers, and reaction arms. We are just starting manifolds and soxhlets. There are probably a few other projects we did that I'm
not thinking of. We also did basic things like stir rods and test tubes.
What do you mean by "larger" 19/22 flasks? I don't really know what's common. We could probably do 2 liters for $50. Haven't tried feflux condensers,
but I bet we could do them. Doesn't seem to much harder than a normal coil condenser. We could probably do those for around $80-120 depending on how
big you want it and the connections to the coil. Manifolds or Schlenk lines would probably start at $80 depending on what you want. I'm not really
sure what you meant by boiling point and capillary tubes. Are you looking for just raw capillary tubing?
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by zts16 | Would it be possible to purchase a single 29/42 ground glass stopper? I might be able to think of something else I'd like to buy so that I wouldn't
have such a tiny order, although I have almost all of the glassware that I need.
Edit: possibly an angled vacuum takeoff. I have a vertical one, but I think an angled one would be more useful to me.
[Edited on 10-12-2014 by zts16] |
A simple 29/42 stopper would be very possible, zts16. We could easily make that for $15 plus shipping and have it out that day. Could probably do the
same for a vacuum take off. I actually really like doing those.
|
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Can you work in quartz?
I am in need of a few quarts furnace tubes - basically just a giant test tube with a 24/40 joint on the top. They would need to be roughly 400mm total
length, inside diameter ~50mm.
|
|
|
Dr.Bob
International Hazard
Posts: 2750
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Are you interested in repairing items as well? I have a whole box of items that have various issues, eg, condensers with broken inlets, addition
funnels with broken equil. tubes, a vigreux with one tip broken off, etc. I would be happy to pay to fix it, as long as I can do it for a reasonable
price. Most are simple repairs. There are few glass blowers left around here, and many university staff don't do outside repairs anymore.
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
I've honestly never seen one of those before, Blue Matter. Looks like a fun project though. We could probably do something like that for $150 plus
shipping.
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Praxichys | Can you work in quartz?
I am in need of a few quarts furnace tubes - basically just a giant test tube with a 24/40 joint on the top. They would need to be roughly 400mm total
length, inside diameter ~50mm. |
We sadly do not have the necessary heat to work quartz efficiently at our school facilities. Though we just took a school trip to a small quartz shop
that said they would rent studio time. I will call him on Tuesday and get back to you on a price. Definitely sounds like a doable project though.
|
|
|
Dr.Bob
International Hazard
Posts: 2750
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Hope I am not being rude to chime in with a shameless plug, but for stock parts like stoppers, custom making those might be a bit pricey. You can buy
them used or even new for not too much.
I have lots of loose stoppers in many TS# sizes and joint sizes, such as TS 8, ,9, 13, 16, 19, 22, 27, 32, and many more. They would be $1 for small,
$2 for larger ones (32 and above). Those are commonly used in sep funnels, volumetric flasks, grad cyl, and other glass containers. The US postage
for one stopper would be about $2-3, more than 1 would add only slightly more in shipping.
I also have 14/20, 19/22, 24/40, 29/42 and other stoppers for standard joints. They are $2 each, some are solid, some hollow, some designed as
reagent bottle tops.
And lastly, I have a box full of Teflon (and a few glass) stopcocks, in most normal sizes. The most common sizes are used in sep funnels, burets,
addition funnels, inlet adapters, manifolds, and more.
Also, if the glassblowing school can use any of the above, or if you have a use for a few new standard joints, valves, stopcocks, and other
glassblowing parts and pieces, I would be happy to donate some to you, I have a few items like that which I cannot use. Even happier to swap them
for some minor repairs :-)
Bob
[Edited on 12-10-2014 by Dr.Bob]
|
|
|
theglassguy
Harmless
Posts: 27
Registered: 11-10-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Dr.Bob | | Are you interested in repairing items as well? I have a whole box of items that have various issues, eg, condensers with broken inlets, addition
funnels with broken equil. tubes, a vigreux with one tip broken off, etc. I would be happy to pay to fix it, as long as I can do it for a reasonable
price. Most are simple repairs. There are few glass blowers left around here, and many university staff don't do outside repairs anymore.
|
We most certainly could do repairs! If you pack up a box good and send us some projects, we will most certainly do our best to fix them. and charge a
reasonable rate. $25 for one repair, but we could probably do a big box of stuff for like $80-$100. If you could post some pictures, that would be
really helpful as to asess the cost. Though I should point out that there is a certain degree of risk involved when repairing something badly broken
or something that has many welds or sensitive components around it. While we certainly wouldn't charge anything if a such a piece did break while
attempting to fix it, know that it's a possibility in some circumstances.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
