fluffy bunny
Harmless
Posts: 25
Registered: 17-10-2002
Location: Australia
Member Is Offline
Mood: No Mood
|
|
Aromatic substitution reactions
I'd just like to know what the variables are that make different aromatic rings harder or easier to perform substitution reactions on than others,
such as nitration?
For example phenol is alot easier to nitrate than benzene and can go all the way to trinitrophenol very easily, whereas trinitrobenzene is extremely
difficult to obtain by direct nitration.
This is brought up by the hexanitrobenzene thread, where people have discussed nitrating different aromatics, to everntually get to hexanitrobenzene.
I'd also like to know why, nitrating, benzene aniline or whatever, and then reducing the nitro groups to amine groups makes it easier to nitrate the
remaining carbons on the ring?
So why is an aromatic ring is easier to nitrate when it has, for example an amine group, rather then a methyl group, and why dichlorobenzene is so
hard to nitrate (is it because of the halogen group?)
I would really appreciate any help on this topic, its really been bothering me that i don't know why this is.
Thanks for your help.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
This is probably best explained in textbooks on basic organic chemistry. Substitution reactions on aromatic rings are so basic that any decent
beginners textbook will have the info. It is also a very neat single subject so you can likely find a chapter exclusively dedicated to it. All in all
I suggest you pick up such a text at your library and read it yourself, because you're simply better off getting the full picture.
|
|
Polverone
Now celebrating 21 years of madness
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
From Morrison and Boyd, Organic Chemistry, fifth edition
Quote: |
14.4 Determination of relative activity
A group is classified as activating if the ring it is attached to is more reactive than benzene, and it is classified as deactivating if
the ring it is attached to is less reactive than benzene. The reactivities of benzene and a substituted benzene are compared in one of the following
ways.
The time required for reactions to occur under identical reaction conditions can be measured. Thus, as we just saw, toluene is found to react
with fuming sulfuric acid in about one-tenth to one-twentieth the time required by benzene. Toluene is more reactive than benzene, and -CH3
is therefore an activating group.
The severity of conditions required for comparable reaction to occur within the same period of time can be observed. For example, benzene is
nitrated in less than an hour at 60 degrees Celsius by a mixture of concentrated sulfuric acid and concentrated nitric acid; comparable nitration of
nitrobenzene requires treatment at 90 degrees Celsius with fuming nitric acid and concentrated sulfuric acid. Nitrobenzene is evidently less reactive
than benzene, and the nitro group, -NO2, is a deactivating group.
For an exact, quantitative comparison under identical reaction conditions, competitive reactions can be carried out, in which the compounds to
be compared are allowed to compete for a limited amount of a reagent. For example, if equimolar amounts of benzene and toluene are treated with a
small amount of nitric acid (in a solvent like nitromethane or acetic acid, which will dissolve both organic and inorganic reactants), about 25 times
as much nitrotoluene as nitrobenzene is obtained, showing that toluene is about 25 times as reactive as benzene. On the other hand, a mixture of
benzene and chlorobenzene yields a product in which nitrobenzene exceeds the nitrochlorobenzenes by 30:1, showing that chlorobenzene is only
one-thirtieth as reactive as benzene. The chloro group is therefore classed as deactivating, the methyl group as activating. The activation or
deactivation caused by some groups is extremely powerful: aniline, C6H5NH2, is roughly one million times as reactive
as benzene, and nitrobenzene, C6H5NO2, is roughly one-millionth as reactive as benzene.
14.5 Classification of substituent groups
The methods described in the last two sections have been used to determine the effects of a great number of groups on electrophilic substitution. As
shown in Table 14.3, nearly all groups fall into one of two classes: activating and ortho, para-directing, or deactivating and
meta-directing. The halogens are in a class by themselves, being deactivating but ortho, para-directing.
Activating: Ortho, para directors
Strongly activating
-NH2 (-NHR, -NR2)
-OH
Moderately activating
-OCH3 (-OC2H5, etc.)
-NHCOCH3
Weakly activating
-C6H5
-CH3 (-C2H5, etc.)
Deactivating: Meta directors
-NO2
-N(CH3)3+
-CN
-COOH (-COOR)
-SO3H
-CHO, -COR
Deactivating: Ortho, para directors
-F, -Cl, -Br, -I
Just by knowing the effects summarized in these short lists, we can now predict fairly accurately the course of hundreds of aromatic substitution
reactions. We now know, for example, that bromination of nitrobenzene will yield chiefly the meta isomer and that the reaction will go more
slowly than the bromination of benzene itself; indeed, it will probably require severe conditions to go at all. We now know that the nitration of
C6H5NHCOCH3 (acetanilide) will yield chiefly the ortho and para isomers and will take place more
rapidly than the nitration of benzene.
Although, as we shall see, it is possible to account for these effects in a reasonable way, it is necessary for you to memorize the calssifications in
table 14.3 so that you may deal rapidly with synthetic problems involving aromatic compounds. |
Whew! My fingers are tired. If you're still interested, I suggest you take Microtek's advice and grab a textbook; I heartily recommend Morrison and
Boyd.
|
|
fluffy bunny
Harmless
Posts: 25
Registered: 17-10-2002
Location: Australia
Member Is Offline
Mood: No Mood
|
|
Thanks alot for that polverone that was just what i was looking for.
Well, i do have a chemistry book, it just didn't cover what groups are activators/deactivators, and what positions on the ring they are likely to
take.
|
|
fluffy bunny
Harmless
Posts: 25
Registered: 17-10-2002
Location: Australia
Member Is Offline
Mood: No Mood
|
|
One more question?
Ok. i have read more about different groups and the aromatic ring and how they affect further substitution reactions, but i still have one more
question.
I understand how different groups affect the positioning of new groups, but what if there are multiple substitutions on nitrobenzene which is a meta
director?
For example: If i were to prepare nitrobenzene, and then add a methyl group to the ring (with the freidel-crafts alkylation) it would take the meta
position right?
NO2
c
c c
c c - CH3
c
(Shitty drawing but i think you get the point)
Now if i were then to further nitrate that to trinitromethylbenzene where would the next to nitro groups fall? Does the methyl group become the
directing group, or is it just not possible or what?
Thankyou for any help.
|
|
fluffy bunny
Harmless
Posts: 25
Registered: 17-10-2002
Location: Australia
Member Is Offline
Mood: No Mood
|
|
Damn the diagram didn't work. Oh well as long as you can understand the question.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
The next group could attatch to any of the activated sites, in this case all the unoccupied ones. So if you did a mono-nitration of meta-nitrotoluene,
you would get a mix of isomers which would be quite hard to separate ( a mess ).
|
|
|