HeYBrO
Hazard to Others
Posts: 289
Registered: 6-12-2013
Location: 'straya
Member Is Offline
Mood: 
|
|
"invisible metal"
Has anyone seen this video? NaK reacts and becomes transparent (clear). https://www.youtube.com/watch?v=BIGMfai_ICg
Thoughts?
[Edited on 23-4-2014 by HeYBrO]
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
Leidenfrost effect on a drop of molten sodium/potassium hydroxide?
Also, sodium and potassium hydroxide form a eutectic:
| Quote: | | The eutectic mixture of 59 weight percent potassium hydroxide (KOH) and 41 weight percent sodium hydroxide (NaOH) is effective. The KOH—NaOH
eutectic mixture has a melting point less than either of its constituent hydroxides. The KOH—NaOH eutectic mixture melts at 170° C. compared with
318° C. for pure NaOH and 360° C. for pure KOH. |
From http://www.google.com/patents/US20050072837
So my best speculative guess is the NaK produces a very hot molten drop of hydroxides that has a low melting point. It stays suspended above the water
because of the Leidenfrost effect while it's still extremely hot, but at some point, water is no longer boiled beneath it and at that point it mixes
effectively and dissolves instantaneously, aka... 'explodes'.
[Edited on 23-4-2014 by deltaH]
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Why don't people electrolyze this eutectic mixture? I'm not sure how they might seperate the resulting mixture of alkalis, but I'm sure it's possible.
Even if its too hard, I would like the mixture itself.
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
I've been wondering that myself ever since I read about the electrolysis of molten sodium hydroxide on SM. Also, one may not even want/need to
seperate the sodium and potassium in NaK for many applications no?
Why don't you start a new thread for that?
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Well, maybe, I have no potassium hydroxide, and no refs at the moment. It would have to be in beginnings unless I find some more info...
|
|
|
Etaoin Shrdlu
National Hazard
Posts: 724
Registered: 25-12-2013
Location: Wisconsin
Member Is Offline
Mood: Insufferable
|
|
There are thousands of refs on the electrolysis of alkali hydroxides, and you have one for the properties of that mixture of interest just
above...what's the problem?
EDIT: Never mind, I see it's up.
[Edited on 4-23-2014 by Etaoin Shrdlu]
|
|
|
nezza
Hazard to Others
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
I have observed a clear ball floating on top of the water after sodium or potassium have reacted with it. I suspect it is a liquid/molten blob of
hydroxide/oxide of the alkali metal, not the metal itself as it starts out red hot and cools, finally reacting explosively with the water.
|
|
|
BobD1001
Hazard to Others
Posts: 182
Registered: 29-3-2013
Member Is Offline
Mood: No Mood
|
|
Wow, that's is truly amazing!
|
|
|
zed
International Hazard
Posts: 2284
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Clear?....Shoot a beam of light through it, and study spectra.
Also, when are we going to see some transparent Aluminum? Don't be shy! If you have secretly developed a technique for producing transparent
Aluminum...... share. I know you are all very humble, and you don't wish to draw attention to yourselves, but share a little bit. We are interested!
|
|
|
nezza
Hazard to Others
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
Video of sodium reacting with water leaving red-hot ball of oxide? on surface.
Attachment: My Movie2.mp4 (1018kB)
This file has been downloaded 484 times
|
|
|
Etaoin Shrdlu
National Hazard
Posts: 724
Registered: 25-12-2013
Location: Wisconsin
Member Is Offline
Mood: Insufferable
|
|
Surely you jest.
|
|
|
LanthanumK
Hazard to Others
Posts: 298
Registered: 20-5-2011
Location: New Jersey
Member Is Offline
Mood: No Mood
|
|
I lit a piece of lithium on fire once and dropped it into water. It reacted in a similar manner to sodium metal, but after the metal was done
reacting, a red hot blob of oxide did float on the surface of the water. The resolution was not high enough to see if a clear blob of solid was left
behind.
Re: surface tension. Iron filings easily float on water and they are 7 times heavier. In fact it can be impossible to get them to sink. Surely a small
amount of fused NaOH can float for a short time.
hibernating...
|
|
|
HeYBrO
Hazard to Others
Posts: 289
Registered: 6-12-2013
Location: 'straya
Member Is Offline
Mood:
|
|
Nezza you should sent that the poster of the video! I'm sure he would be thrilled to see that it can be replicated. Do a video response!
|
|
|
vmelkon
National Hazard
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Quote: Originally posted by deltaH  | Leidenfrost effect on a drop of molten sodium/potassium hydroxide?
Also, sodium and potassium hydroxide form a eutectic:
| Quote: | | The eutectic mixture of 59 weight percent potassium hydroxide (KOH) and 41 weight percent sodium hydroxide (NaOH) is effective. The KOH—NaOH
eutectic mixture has a melting point less than either of its constituent hydroxides. The KOH—NaOH eutectic mixture melts at 170° C. compared with
318° C. for pure NaOH and 360° C. for pure KOH. |
From http://www.google.com/patents/US20050072837
So my best speculative guess is the NaK produces a very hot molten drop of hydroxides that has a low melting point. It stays suspended above the water
because of the Leidenfrost effect while it's still extremely hot, but at some point, water is no longer boiled beneath it and at that point it mixes
effectively and dissolves instantaneously, aka... 'explodes'.
[Edited on 23-4-2014 by deltaH] |
Like you said, it could be that it produces hydroxide, which would be molten. My guess is that the NaK dissolves in the hydroxide to give a dark blue
color. Once no more metal is present, it looks transparent. As it cools, it drops into the water but perhaps it is still above 100 oC and so it blows
up the water.
However, like the video says, the density of of NaOH and KOH is about 2x that of water. I don't know about liquid NaOH and KOH mixture.
He needs to capture that ball before it falls into the water and let it cool off.
[Edited on 7-5-2014 by vmelkon]
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here. |
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
