| Pages:
1
2
3
4
..
7 |
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Perchloric acid (azeotropic). Not only is it corrosive and oxidizing, it's also toxic to the thyroid.
I thought about making a small amount of the anhydrous acid, but decided against it.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I used quite a few very dangerous chemicals, but synthesizing chemicals is fairly tame for me.
The most dangerous ones are
- synthesis and isolation of bromine: http://woelen.homescience.net/science/chem/exps/OTC_bromine/...
- synthesis and isolation of phosphorus tribromide: http://woelen.homescience.net/science/chem/exps/PBr3_synth/i...
- synthesis and isolation of white phosphorus: http://woelen.homescience.net/science/chem/exps/RedP2WhiteP/...
Some other synths I did with nasty intermediate but fairly benign end products: KIO4 (through Cl2, bubbled in alkaline solution of KI and KOH),
Na3H2IO6 in appr. same way.
In some experiments I made and isolated very dangerous things, but these I did not keep around. Some examples: chlorine azide, selenium bromide,
phosphine, ammoniacal peroxo complexes of chromium(VI) and chromium(IV).
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
| Quote: |
KIO4 (through Cl2, bubbled in alkaline solution of KI and KOH), Na3H2IO6 in appr. same way. |
Woelen, could I make KBrO4 by in the same way, but with KBr and KOH?
|
|
|
DraconicAcid
International Hazard
Posts: 4355
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Online
Mood: Semi-victorious.
|
|
Quote: Originally posted by Zyklonb  |
| Quote: |
KIO4 (through Cl2, bubbled in alkaline solution of KI and KOH), Na3H2IO6 in appr. same way. |
Woelen, could I make KBrO4 by in the same way, but with KBr and KOH?
|
I doubt it. Perbromates are much harder to synthesize than periodates; Cotton and Wilkinson say "Perbromates were only prepared in 1968; previously
there were many papers justifying theoretically their nonexistence. ...only the strongest oxidants can form perbromate. Probably kinetic reasons are
responsible for the failure of ozone and S2O82- to cause oxidation. Perbromate is a stronger oxidant than
perchlorate or periodate; there is no convincing explanation of this anomaly....
Small amounts of perbromic acid or perbromates can be obtained by oxidation of bromate electrolytically or by the action of XeF2. The best
preparation involves oxidation of bromate by fluorine in 5 M NaOH solution." (Advanced Inorganic Chemistry, 4th. Ed, p561).
[Edited on 22-3-2014 by DraconicAcid]
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
jwpa17
Harmless
Posts: 45
Registered: 28-5-2013
Member Is Offline
Mood: No Mood
|
|
When I was an undergraduate, I prepared (a very small quantity of) dimethyl peroxide. I was too stupid to realize how unstable it was, but one of my
professors stopped by, asked what I was doing, and nearly jumped out of the room, saying "Get that behind a safety shield!"
My research mentor - who was a physical organic chemist, not a synthetic organic guy - had reviewed my process, but apparently didn't fully appreciate
the peroxides, either.
BTW, nothing happened. I made it, prepared a solution, and measured the GC retention - all to prove that it WASN'T being produced in a reaction we
were exploring.
|
|
|
SM2
Hazard to Others
Posts: 359
Registered: 8-5-2012
Location: the Irish Springs
Member Is Offline
Mood: Affect
|
|
dimethylmercury (micro-synthesized, quadruple gloved)
also, but not synthesized:
TCDD (tetradioxin) - ala Putin
Thallium - ala Putin
What a psychopath that man is. Russia has almost always been on the wrong side of
almost everything. Too bad,,,the world hates them.
"Old men who speak of victory
shed light upon their stolen life
they - drive by night- and act as if they're
moved by unheard music." B. Currie
|
|
|
forgottenpassword
Hazard to Others
Posts: 374
Registered: 12-12-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by SM2 | dimethylmercury (micro-synthesized, quadruple gloved)
also, but not synthesized:
TCDD (tetradioxin) - ala Putin
Thallium - ala Putin
What a psychopath that man is. Russia has almost always been on the wrong side of
almost everything. Too bad,,,the world hates them. |
Is he on the wrong side of history too?! There's only
one thing worse than being exposed to propaganda - unknowingly repeating it. It shows a lack of internal functionality.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Also, polonium.
https://en.wikipedia.org/wiki/Poisoning_of_Alexander_Litvine...
|
|
|
nezza
Hazard to Others
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
The 3 most dangerous syntheses I've tried and succeeded at :-
Synthesis and ampouling of NaK. (Very scary. It may ignite in moist air and explodes on contact with water)
Bromine. (Toxic vapour. Burns skin immediately)
White phosphorus from red (Obvious dangers)
|
|
|
sasan
Hazard to Self
Posts: 92
Registered: 22-2-2014
Location: TEHRAN / IRAN
Member Is Offline
Mood: Radiative
|
|
KCN is not toxic and dangerous until you work with,accidentaly treating the CuSO4 solution and KCN,and smelling the dicyanogen gas!!!
But sulfuric acid,I think is very dangerous,specially for those who don't know about its power of corrosivity and dehydrating,in their mind,thinking
that sulfuric is similar to hydrochloric and just can irritate their skins,but...
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
I collected and crystallized 1.8 mg of Silver fulminate.... from snap-its... And I've worked with barium compounds, but that's about it.
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Barium compounds are cool.
So far I have: Barium nitrate, barium sulfate, barium carbonate, barium oxide and barium hydroxide.
[edit] All of these can be made from barium nitrate.
That's how I did it. I plan on doing the same with strontium nitrate.
[Edited on 26-3-2014 by Zyklonb]
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
| Quote: Originally posted by Zyklonb | Barium compounds are cool.
So far I have: Barium nitrate, barium sulfate, barium carbonate, barium oxide and barium hydroxide.
[edit] All of these can be made from barium nitrate.
That's how I did it. I plan on doing the same with strontium nitrate.
[Edited on 26-3-2014 by Zyklonb] |
How'd you get the oxide?
I think you can make the acetate by way of reaction of Barium carbonate and acetic acid (Vinegar) to make CO2 and barium acetate (Which I'm
pretty sure is soluble).
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
I decomposed the nitrate, about 5 minutes at 600°C will do it.
| Quote: |
I think you can make the acetate by way of reaction of Barium carbonate and acetic acid (Vinegar) to make CO2 and barium acetate (Which I'm pretty
sure is soluble). |
Yep, that's the great thing, as soon as you get the hydroxide or the carbonate, almost any anion in easy to make by reacting it with the corresponding
acid.
I made the hydroxide like this:
Ba(NO3)2 (aq) + 2NaOH (aq) → Ba(OH)2↓ +NaNO3 (aq).
[Edited on 26-3-2014 by Zyklonb]
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
| Quote: Originally posted by Zyklonb | I decomposed the nitrate, about 5 minutes at 600°C will do it.
| Quote: |
I think you can make the acetate by way of reaction of Barium carbonate and acetic acid (Vinegar) to make CO2 and barium acetate (Which I'm pretty
sure is soluble). |
Yep, that's the great thing, as soon as you get the hydroxide or the carbonate, almost any anion in easy to make by reacting it with the corresponding
acid.
I made the hydroxide like this:
Ba(NO3)2 (aq) + 2NaOH (aq) → Ba(OH)2↓ +NaNO3 (aq).
[Edited on 26-3-2099 by Zyklonb] |
Thanks! I'll try that.
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Your welcome, I too, will make some Sr(OH)2 today.
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
| Quote: Originally posted by The_Davster | People, keep it on topic.
Lots of things. Azidotetrazole, silver fulminate, anhydrous HN3, distilled primary explosives, H2Se, phosgene, NI3, hydrazine
edit: oh and pure Mn2O7.
[Edited on 21-3-14 by The_Davster] |
How did you make the pure manganese heptoxide?
[edit] I think I found it. Is this where you made it?
[Edited on 26-3-2014 by Zyklonb]
|
|
|
annaandherdad
Hazard to Others
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
Recently I've been interested in reducing metal oxides with hydrogen. As a variation, I've been thinking about doing it with carbon monoxide. Apart
from the fact that CO is poisonous, I learned by doing some research that in CO + Ni produces nickel carbonyl, which is much more dangerous than CO by
itself.
The lesson for me was that just randomly trying things can be dangerous. This is sort of obvious, but it was interesting to run into a specific
example.
Any other SF Bay chemists?
|
|
|
Dr.Bob
International Hazard
Posts: 2750
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
The most dangerous work was making fluorine chemicals, most of which started with fluorine, HF, SF4, or similar compounds. The products were often
quite safe and stable, but some of the intermediates are quite dangerous.
I have also worked in a lab where phenyl-piperidine analogs are made. They are the class of compounds known for causing a Parkinson like disease due
to their neurotoxicity. The best known one is MPTP (N-methyl-phenyl-tetrahydropyridine), which was an impurity in a designer drug.
Also made Fremy's salt on a large scale once, an oxidant with a stabilized free radical used in oxidations of hydroquinones. I left it drying for a
while and when I came back, there was a nice hole in the rather large watch glass it has been sitting on, and some ash. That was exciting.
Another fun one was potassium hydride, which I used for a series of reactions where sodium hydride just did not work. I weighed it in a glove bag,
then ran the reaction and any time I exposed the spatula, vial it was weighed into, or gloves to air, they would often ignite from the nice humid air
in the south. So I learned to just have a metal pan to put everything into so it could safely just burn off the KH.
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Glove bag... I've used one of those before, so frustrating to use. I eventually gave up, How did you make yours?
|
|
|
eidolonicaurum
Hazard to Self
Posts: 71
Registered: 2-1-2014
Location: Area 51
Member Is Offline
Mood: Hydric
|
|
Chromyl chloride, too much chlorine, bromine, KMnO4/Mg mixture, white phosphorus (only a tiny amount though  ) HMTD, nitrogen triiodide, does manganese heptoxide count?
|
|
|
blargish
Hazard to Others
Posts: 166
Registered: 25-9-2013
Location: Canada
Member Is Offline
Mood: Mode Push
|
|
A little while back I attempted to make ethyl hypochlorite outside (it was winter and the temp was cold) by bubbling chlorine gas through a solution
of sodium hydroxide and ethanol in water. I guess I didn't regulate the temperature well enough, and the solution grew hot, resulting in the ethyl
hypochlorite boiling off . That would have been one of my more dangerous syntheses.
The first time I synthesized fuming nitric acid, I underestimated the violence of its reaction with copper. I added a bit to a test tube, dropped a
piece of copper in, and added a drop of water to break the passivation... In short, NO2 is not a pleasant substance by any means...
Chromium trioxide is probably one of the more dangerous chemicals I have in my possession with its crazy
oxidizing capability and its toxicity. Its ability to set organic solvents on fire on contact is awesome!
BLaRgISH
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Well, it depends how you define "dangerous".
I have made alcohol.
I suspect that more people have died from the effects of alcohol than from all the compounds mentioned in this thread put together.
On a similar note, I have burned hydrogen and made water.
I imagine more people drown each year than are killed by things like Mn2O7 or nitric acid.
|
|
|
copperastic
Hazard to Others
Posts: 158
Registered: 15-3-2014
Location: In your basement
Member Is Offline
Mood: Good
|
|
Where did you get barium nitrate zyklonb?
|
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
I got mine at Skylighter.
http://www.skylighter.com/barium-nitrate-powder.html
This is where I get all my pyrotechnic chemicals.
I think you'll need your dad to order it, as they will check your age, before you can buy anything that can be used in fireworks, ect.
[Edited on 6-4-2014 by Zyklonb]
|
|
|
| Pages:
1
2
3
4
..
7 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
