| Pages:
1
2 |
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
Dichloromethane from methanol?
What would be the product from bubbling Cl2 through methanon? would this be a good way to produce dichloromethane?
And just a side thought, what about the product from chlorination of isopropyl or isobutyl alcohol?
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
Esplosivo
Hazard to Others
Posts: 491
Registered: 7-2-2004
Location: Mediterranean
Member Is Offline
Mood: Quantized
|
|
Chlorination by direct action of Cl2 on the alcohol will not remove the -OH group and will cause a mixture of compounds to form. If you want
dichloromethane you will have first have to oxidize the methanol to methanal (by K/Na dichromate) and then react with PCl5. Not that simple ain't
it 
Theory guides, experiment decides.
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
Would KMnO4 be sufficient to oxidise the methanol? Just out of interest, what would be formed by direct chlorination?
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
Esplosivo
Hazard to Others
Posts: 491
Registered: 7-2-2004
Location: Mediterranean
Member Is Offline
Mood: Quantized
|
|
KMnO4 would oxidize the methanol to the respective acid that is methanoic acid. KMnO4 is too strong an oxidizing agent to oxidize the methanol only to
the aldehyde. I am not sure about the products of direct chlorination though. Maybe some one else can help.
Theory guides, experiment decides.
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
What about overoxidising with KMnO4, than adding a mild reducing agent, something that wouldn't be strong enough to take it back to methanol?
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
Esplosivo
Hazard to Others
Posts: 491
Registered: 7-2-2004
Location: Mediterranean
Member Is Offline
Mood: Quantized
|
|
Don't know any reducing agent which would reduce the carboxylic acid to the aldehyde (except those used in industry which are complex and start
from methanol to produce the aldehyde). To reduce a carboxylic acid you need some strong reducing agent such as Lithium Aluminium Hydride, which being
a strong reducing agent causes the rxn to continue and produce the alcohol.
Theory guides, experiment decides.
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
I wouldn't recomend chlorinating methanol. You stand a fair chance of generating some nasty carcinogens.
See
http://www.sciencemadness.org/talk/viewthread.php?tid=2177&a...
[Edited on 17-6-2004 by unionised]
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
Yeah, I guessed that, but what exactly would be generated? knowing me, I can turn it to some use 
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Methanol can also be converted to methanal by using a hot(red hot) copper or platinum wire. You could pass methanol vapours through a copper pipe
filled with copper wool while the pipe is being very strongly heated. What would come out the other side is a mix of formaldehyde and unreacted
methanol vapours, this would have to of course be bubbled into water.
Not that one wants to work with hot methanol vapours and an open flame heat source...
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
I might have to give that a try, but copper wool? where would I get that, I have only ever seen steel/iron wool over here?
Do you think iron wool with fine copper powder mixed throughout it might do the trick?
[Edited on 17-6-2004 by Reverend Necroticus Rex]
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
I just saw copper wool at safeway today. It was in the household cleaner section. But before you give this method a try search around this site, I
believe that somewhere it says how to make safety devices into it to prevent accidental explosions.
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
| Quote: |
Yeah, I guessed that, but what exactly would be generated? knowing me, I can turn it to some use
|
You could perhaps check the linked
thread??? 
Use google and the forum search engine!
If you're even too lazy to check out links that others provided you with, well then expect to be banned (AGAIN) soon.
Yes, I know who you are.
[Edited on 17-6-2004 by vulture]
[Edited on 17-6-2004 by vulture]
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
Thanks, I missed it the first time I looked.
bis-chloromethyl ether is frightful, Could you post a link to an MSDS for it? I can't find one on google, thanks.
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
t_Pyro
Hazard to Others
Posts: 120
Registered: 7-2-2004
Location: India
Member Is Offline
Mood: Volatile
|
|
This link should answer your questions. Google does work.
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
Yeah, I found those, there dosen't seem to be an msds for it though, only warnings about it being formed from HCl+methanol, and a few procedures
and such for it's disposal. No matter.
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
Mendeleev
Hazard to Others
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
This is probably less relevant to the author of this thread as he lives in Great Britain, and most likely does not have the same products as in the
USA, but in the USA Klean Strip KS-3 paint stripper and remover is 85-90% DCM according to the msds. The rest is ethanol toluene and acetone. So
distill at 45-50 degrees and you should get at least 3 L of DCM and the cost is $10 a gallon for the remover. It is sold in Home Depot, but I
don't think Lowes carries that brand.
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
I haven't yet found DCM in paint remover over here, I have however found it as the solvent in some aerosol glues, it's just that the
distillation is a pain because of all the nasty gluey mess that gets left behind 
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
You need to produce an msds for any material you want to sell or transport. Bis CME is so nasty that nobody sells it so there isn't a data sheet.
Last time I checked, nitromoors paint stripper was based on dichloromethane.
|
|
|
Mendeleev
Hazard to Others
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
Well here's an MSDS for KS3 paint remover, around 80-85% DCM.
Attachment: KS-3 Remover.pdf (169kB)
This file has been downloaded 1102 times
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Chlorination of methanol with either sulfur or phosphorus present supposedly yields a good percentage of tetrachloromethane. It was one of the
methods that I researched for the formation of this specific product and is used industrially.
|
|
|
Reverend Necroticus Rex
Hazard to Others
Posts: 196
Registered: 15-6-2004
Location: Right behind you.......
Member Is Offline
Mood: Poisonous
|
|
Please post some more details on that, do you mean chlorination in the prescence of elemental sulphur?
also I'm rather worried about formation of ANY bis-chloromethyl ether, that stuff looks nasty in the extreme
The sun is shining on a brand new day
Blackened corpses burn where they were slain
Self-flagellation prompts him to confess, Bless me father, for I made this mess.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
I don't have any reference material but I remember the reaction takes place under pressure but it is not some unattainable pressure.
I theorize the initial step is analogous to the reaction of methane with sulfur then the thus formed carbon disulfide would readily react with the
chlorine or sulfur chlorides looks like some sulfur would be lost this way though:
CH3OH + 3S ----> CS2 + H2O +H2S
CS2 + 2Cl2 ----> CCl4 + 2S
I have no references to indicate that bis-chloromethyl ether is formed but I would assume it is considering it is formed under similar reactions.
Edit: What am I thinking leaving H2S in there with chlorine being pumped into solution? The H2S would instantly react to HCl and SCl2 therefore the
overall balanced equation could be:
CH3OH + 3Cl2 --(S)--> CCl4 + 2HCl + H2O
[Edited on 6/21/2004 by BromicAcid]
|
|
|
Theoretic
National Hazard
Posts: 776
Registered: 17-6-2003
Location: London, the Land of Sun, Summer and Snow
Member Is Offline
Mood: eating the souls of dust mites
|
|
Dehydrogenating methanol to formaldehyde, then reacting it with SOCl2 (not PCl5) is a viable method, since SOCl2 is much easier to get than PCl5.
|
|
|
ctrlphreak
Harmless
Posts: 14
Registered: 3-2-2006
Member Is Offline
Mood: No Mood
|
|
Idon't want to be an asshole, but why can't you hydrochlorinate methanol to methyl chloride, have that distilled over, and then further chlorinate it?
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
| Quote: | Originally posted by ctrlphreak
Idon't want to be an asshole, but why can't you hydrochlorinate methanol to methyl chloride, have that distilled over, and then further chlorinate it?
|
Methyl chloride is a gas bp -24.2 C so it is a pig to handle.
Also gas phase chlorinations are a mad pig in the lab, the whole thing could run out of control and explode.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
