whupharm_xu
Harmless
Posts: 20
Registered: 28-7-2004
Member Is Offline
Mood: No Mood
|
|
preparation of CH3AlCl2
CH3Cl+Al---CH3AlCl2
who will give certain literature or some details about the reaction?!
thanks!!!
|
|
|
Mephisto
Chemicus Diabolicus
Posts: 295
Registered: 24-8-2002
Location: Germany
Member Is Offline
Mood: swinging
|
|
You started already two threads about very similar compounds. Learning chemistry means also to learn to research. As student you should be able to
research by yourself and not let do others the work. Your university has the Chemical Abstracts for sure in its library. Check also Beilstein and
Houben-Weyl. Ask for access to an internet-database like CASREACT (via SciFinder or BeilsteinCrossfire), since searching goes faster there, as in the
book-version of CAS.
|
|
|
true_alchemy
Harmless
Posts: 21
Registered: 29-9-2004
Member Is Offline
Mood: No Mood
|
|
If you can't readily obtain literature why don' t you just try it? I think I once accidently made a propylaluminum bromide by simply
reacting aluminum with PrBr in THF. MeCl will stay in the reaction mixture even with light reflux at THF temps. I think it is because of the vapor
density. Be careful I think alkyl aluminums are pyrophoric. That's why I said "accidently" 
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
If organic-substituted Al halides can be made so easily, I wonder if anyone has thought of the possibility that such compounds could be used as a
substitute for Grignard reagents? I have not been able to find anything definite on Google about this.
John W.
|
|
|
tokat
Hazard to Self
Posts: 64
Registered: 1-6-2004
Location: 6feet south
Member Is Offline
Mood: No Mood
|
|
Johnww whats the general jest of Grignard reagents?
|
|
|
BromicAcid
International Hazard
Posts: 3254
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Went to the library, spent 5 minutes looking up methylaluminum dichloride on Beilstein. Got several references to its production including a few
along the lines of your reaction. Printed them out (free) went to the second floor in the reference section, looked some up and found a good
reference and photocopied it ($0.10). Here goes:
From J. Amer. Chem. Soc.; 60; 1938; 2276
| Quote: | The desired amount of aluminum metal, preferably in an alloy such as Aluminum Company of America Alloy 12 (8% Copper), is cut in clean, dry shavings
or chips. These are placed in a glass or steel reaction vessel equipted with: halide inlet and product discharge line, temperature and pressure
gauges, provision for heating and cooling, and a safety blow-out. The catalyst, about 0.1% of anhydrous aluminum chloride (or iodine, or the product
of a previous preparation) is placed in on spot on top of the aluminum and the reaction vessel closed. Air is pumped or flushed out, and methly
chloride gas introduced to a pressure of one atmosphere (or more, depending on the equiptment used). If the reaction fails to start in one hour at
room temperature, the charge is heated to 100C. Once started, the reaction is autocatalytic and highly exothermic. More methyl chloride is added,
and cooling is applied to maintain a suitable rate of reaction and to keep the temperature of the charge below 75C. At higher temperatures, the side
reaction may occur with the formation of gas.
When no more methyl chloride is absorbed, the reaction is completed. The reaction of the aluminum is quantitative, while any iron or copper in the
alloy remains unattacked. Side reactions are negligable. In a typical preparation, about 60 milimoles of aluminum in the form of alloy took up 88.9
milimoles of methyl chloride with the formation of only 0.9 milimole of methane; the non-volitile residue contained no aluminum and 0.4 miliatom of
chlorine; no iron or copper was detected in the distilled product.
The water-white, oily liquid is decanted or vacuum distilled, from the reamining metallic sludge into a suitable closed container.
.......
The product of the methyl chloride reaction is almost exactly an equimolecular mixture of dimethylaluminum chloride and methylaluminum dichloride. No
evidence of either trimethylaluminum or aluminum chloride is obtained on fractional distillation.
.......
When the individual compounds are desired, they may be separated from their mixture by fractional vacuum distillation, or the dimethylaluminum
chloride may be obtained in pure form by heating the mixture with an excess sodium chloride and distilling the dimethyl compound from the monomethyl
addition compound. |
That is plenty of information for you to lean about this reaction. You can thank me later.
|
|
|
mick
Hazard to Others
Posts: 338
Registered: 3-10-2003
Member Is Offline
Mood: No Mood
|
|
If organic-substituted Al halides can be made so easily, I wonder if anyone has thought of the possibility that such compounds could be used as a
substitute for Grignard reagents? I have not been able to find anything definite on Google about this.
This is what I generally think
Grignard reagents are similar organolithium reagents, they are nucleophiles, act as bases with out any water there, make a - , how to extend the idea
of acid + base + water to things where there is no any water.
Organoaluminium reagents are electrophiles , they make a +, they are called Lewis acids.
If you want to do a cyclo-addition reaction in organic chemistry, which needs a plus some where. AlCl3 is a standard catalyst (personal experience, if
you are doing a 25 gal reaction and your Boss tells you to use powdered AlCl3 in stead of the usual granular stuff do not listen or be ready to run
when every thing starts getting hot and you have got what is called a run away reaction).
What I have found, from the literature, is that the alkylaluminium chlorides also act as a base towards water. If you have any water in the standard
AlCl3 catalized reaction, the water catalizes a polimerization reaction.
With the alkylaluminium chlorides, the alkyl group acts as a base towards water and takes all the residue out, ending up as ethane or methane.
So you have got a Lewis acid and a Bronsted base in the same compound.
Who ever worked that out, I would like to shake thieir hand.
If neat, I think they are pyrrophoric, but the solutions seem to be OK.
Could be wrong
mick
Edit was because I missed a bit
[Edited on 30-9-2004 by mick]
|
|
|
true_alchemy
Harmless
Posts: 21
Registered: 29-9-2004
Member Is Offline
Mood: No Mood
|
|
Yes there is literature on the reactions of alkyl aluminum reagents. Ethyl Corp. has not only advertised sale of alkyl aluminums but I beleive they
had a brochure on their reactions and uses.
I was looking at one of their items some time ago and if I remember correctly it acted as a RMgX but gave highly branched products but this may have
just been from a trialkyl. I don't remember.
Calcium forms alkylcalcium compounds as grignard reagents also. I've been wanting to look at both of these.
Man, this is good stuff, I love it!
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
