| Pages:
1
2 |
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
Methyl Acetylides
Something thats been sitting under everyones noses, yet hasn't made mention. MAPP gas (methyl acetylene - propyne) is more readily available then
acetylene and will also form acetylides with silver, maybe the others as well but I havnt seen any mention of the methyl acetylides before, maybe MAPP
wasnt commonly used back in the days of Fedoroff etc.. Silver methyl acetylide (SMA) can be made by bubbling MAPP gas through a silver nitrate
solution.
<center><img src="http://www.sciencemadness.org/scipics/axt/silvermethylacetylide.jpg"></center>
5g AgNO3 was dissolved into 75ml distilled water, into this was bubbled MAPP, within minutes the solution had turned white with a large crop of
crystals, was filtered and dried.
<center><img src="http://www.sciencemadness.org/scipics/axt/smapics.jpg"></center>
On ignition small amounts of SMA explode with a thump, flame and thick cloud of black smoke.
<center><img src="http://www.sciencemadness.org/scipics/axt/smaignite.jpg">
<a href="http://geocities.com/roguemovies7/">MOVIE AVAILABLE</a></center><br>
[Edited on 9-12-2005 by Axt]
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
Sorry, methyl acetylene - <i>propyne</i> should be <i>propadiene</i>, propyne is another name for methyl acetylene.
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
You seem to have got them mixed up. Propyne, or methylacetylene, C3H4, is H-C(triplebond)C-CH3. It is isomeric with propadiene, or allene, H2C=C=CH2.
BTW How come propyne is "more readily available than acetylene"? In view of the manner in which acetylene can be made on an industrial scale
via CaC2 by reaction of Ca metal, or of CaO or CaCO3, with carbon, I would have thought the opposite.
John W.
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by JohnWW
You seem to have got them mixed up. Propyne, or methylacetylene, C3H4, is H-C(triplebond)C-CH3. It is isomeric with propadiene, or allene, H2C=C=CH2.
|
Errr yeh as I just said. I assume the propadiene is formed as a byproduct on forming MA.
| Quote: | | BTW How come propyne is "more readily available than acetylene"? |
Because we (or at least I) arn't talking about industry, Im talking about walking into a hardware store and buying a bottle of gas, without the need,
hastle or cost of hiring a whole tank of acetylene. MAPP is much more readily available to the common man.<br>
[Edited on 4-11-2007 by Axt]
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
| Quote: |
BTW How come propyne is "more readily available than acetylene"? In view of the manner in which acetylene can be made on an industrial scale
via CaC2 by reaction of Ca metal, or of CaO or CaCO3, with carbon, I would have thought the opposite.
|
Making acetylene through CaC2 is very uneconomical because of the huge energy cost for producing CaC2. Therefore this method has been largely
abandoned by the industry. But let's keep this on topic and prevent another I-know-more-than-you showoff, shall we?
[Edited on 28-9-2004 by vulture]
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
TomThumb
Hazard to Self
Posts: 52
Registered: 23-6-2004
Location: UK
Member Is Offline
Mood: No Mood
|
|
Im dumb
Ok, excuse my stupidness but how would you make a silver nitrate solution.
Iv never even made ng.
Thanks
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Fitting title tomthumb
A solution is what results when a solute is disolved in a solvent.
In this case the solute is silver nitrate and the solvent is water.
So you just dissolve silver nitrate in water.
It was even stated in the post "5g AgNO3 was dissolved into 75ml distilled water", guess what that makes? Thats right, a solution.
jeez
EDIT: Axt; Did you weigh your yield?
[Edited on 29-9-2004 by rogue chemist]
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
No, I never weighed the yield, but I expect it depends more on your ability to get it out filter & dry it without loss, as it should go to near
100% (It wont create a double salt will it??).
Drop test was 0-5cm (same as acetone peroxide). Though it only fires after being struck numerous times at that height. 10-15 to guarantee first hit
detonation. This is due to it being a fine powder, has to have any "give" pushed out of it before it will fire. Need a lighter weight on the
rig to get decent results on the sensitive primaries.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Yes, that was why I was wondering if you knew the yield, to calculate if there was a possibility of a double salt.
I hope to try this in the near future once I get some MAPP gas. I always wanted to try acetylides but was never able to get calcum carbide without
huge hazmat charges.
Any tests on what it takes for silver methyl acetylide to DDT yet?
When I go to get MAPP, does that attachment on your bottle come with it, or does it cost extra? Thanks
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
| Quote: | | Any tests on what it takes for silver methyl acetylide to DDT yet? |
Nup
| Quote: | | When I go to get MAPP, does that attachment on your bottle come with it, or does it cost extra? |
It'll cost extra, I have a couple and I think both were over $50, then $20 for the gas! (AUS $'s). Make sure you can easily add a tube to
it, for some its not that easy without leaks.
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
This is a bit off-topic, but the other major industrial process for making acetylene is by heating CH4, usually from natural gas, at 1,500ºC briefly
(0.1 to 0.01 sec.): 2CH4 --> C2H2 + 3H2. This is obviously a lot quicker and requiring less energy (in terms of Ca reduction) than the CaC2
method, although the CH4 raw material may in the future be in short supply, and the C2H2 has to be separated from the H2 byproduct e.g. by gas
chromatography or liquefaction.
As for methylacetylene, there do not appear to be any methods for preparing it directly or from a precursor 3-carbon compound, and without being mixed
with allene (propadiene). The only methods appear to be from acetylene by adding a CH3, e.g. by using just enough NaNH2 and CH3Br with C2H2 for
monomethylation (dimethylation can also occur).
A reference I have, T.W. Solomons' Organic Chemistry, says that silver (I) alkylacetylides, as an insoluble covalent compound, can be made by
bubbling or mixing the alkylacetylene into an aqueous solution of ammoniacal silver hydroxide, [Ag(NH3)2]OH, with NH3 byproduct. Cu(I) acetylides can
be made in the same way. The reaction is a qualitative test for terminal alkynes, and a method for separating terminal alkynes from alkynes in which
the triple bond is internal.
John W.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Well, I had a go at it tonight.
2g silver was dissolved in 2.5mL 70% nitric(yes I know thats a huge excess) and once disolved the volume was increased to 40mL by addition of
distilled water. Propyne was then bubbled through.
I was intending to do this as an analytical experiment to figure out if SMA formed a double salt but I made a few very stupid mistakes.
-I did not wait long enough for the silver to dissolve
-I did not bubble propyne through long enough, evidenced by after filtering out the SMA, adding NaCl to the filtrate caused silver chloride to
precipitate.
Also, Axt, I only paid 10$(CDN) for my pound of propyne , but that is probally
because I am in a province with a lot of petrochemical resources/industries. I also managed to get around paying for a 50$ adaptor by just using the
cheap burner head from my propane torch, unscrewing the flame adjuster off and attaching tubing to what was left of the burner assembly.
And finally, Axt, did your propyne smell terrible, mine did , I was expecting it to
smell something like propane which I find has a semi-pleasant smell.
I will definatly be repeating this experiment, so I can determine if SMA forms a double salt.
[Edited on 30-9-2004 by rogue chemist]
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by rogue chemist
And finally, Axt, did your propyne smell terrible, mine did, I was expecting it to
smell something like propane which I find has a semi-pleasant smell. |
I believe the the last P in MAPP is "petroleum gas" (LPG). Probably has additives to give it the awful smell.
| Quote: | | Also, Axt, I only paid 10$(CDN) for my pound of propyne |
Same "benzomatic" cylinder? I think they would be the most common in N. America, US company. The benzomatic plastic torches wont work for
feeding gas. I had to buy the brass one shown, which could have the "air inlet" screwed off.
Anyway, all attempts to make an acetylide from cupric salts (sulphate,TACN,hydroxide) and Ni(NH4)2(S2O4)2 have failed, amminated or not.<br>
|
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
Did you try Cu I (cuprous)? IIRC this works better with normal acetylene too - and is more stable.
By failing I presume no precipitate could be found?
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
|
rikkitikkitavi
Hazard to Others
Posts: 192
Registered: 17-6-2002
Member Is Offline
Mood: No Mood
|
|
rouge chemist, foul smelling components are typically present in C2H2 made from CaC2. The latter also contains CaP forming phosphine in contact with
water.
It would not be a surprise if C2H2 made by other processes has foulsmelling additives too, to distinguish it from other gases (and give it the
"traditional C2H2 smell) and make leaks noticable . C2H2 has a very wide explosion range in air and is very dangerous because of that. But not
under this conditions.
It is great fun to drop a few pieces of CaC2 into water while keepiing igniting the gas bubbles forming, especially if soap is added  the soot makes the flames very bright!
/rickard
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Some results
My SMA dried into large plates on the filter paper that were grey unlike the SMA after it first precipitated. I do not like how it created those
plates as they must be broken up in order to use the primary, which is always nerve wracking.
Does anyone have an idea on why SMA darkens after a while?
SMA does not seem to DDT that easily. Into a 3mm diameter straw was pressed 10mm column of lightly pressed SMA. This was then taped to a nickel and
electrically ignited under some sand. I was rewarded with a small bang, obviously not a detonation, too quiet, and the nickel was not deformed in the
slightest, just blackened by silver. I hope to try again with a better casing and possibly a bit more SMA.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Probably darkens from photosensitivity to light, like many silver compounds. As the light strikes it the silver is reduced to the free element and in
turn probably releases something like CH3CC-CCCH3
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by chemoleo
Did you try Cu I (cuprous)? |
I had a half-arsed attempt. Dissolved CuO in HCl, then Cu into that until clear. Using varying amounts of ammonia (from none to a lot) I couldnt get
an explosive precip. If ammonia was added until the purple complex (from residual cupric) just started to form, bubbling the MAPP resulted in a
non-explosive mass of yellowy-green precip. Cu(OH)Cl ? Whatever the case, cuprous isn't easy.
Below is the result 0.1g Ag salt lightly pressed in a .22 Khornet case, doesnt mean much but at best looks to be a weak detonation.
<center><img src="http://www.sciencemadness.org/scipics/axt/smacasing.jpg"></center>
[Edited on 9-12-2005 by Axt]
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Axt, what are the benzomatic plastic torches? My gas cylinder of propyne is "BernzOmatic" brand and is brass.
I attached a picture of the cylinder and my way around paying for a 50$ attachment; a disposable pipette withthe end removed, taped to the main body
of the propane burner attachment. Coincidently, the other end of the pipette happens to fit perfectly into the inside of a piece of my glass
tubing.
EDIT: "burnzOmatic"changed to "BernzOmatic"
[Edited on 2-10-2004 by rogue chemist]
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
OK, now that I look mine is "bernzomatic" as well, stange that I've always read it at "benzomatic", but then, your reading it as "burnzomatic"  . Sounds like yours is a different formulation to me, I dont know what MPS gas is.
<center><img src="http://www.sciencemadness.org/scipics/axt/torches.jpg"></center>
[Edited on 9-12-2005 by Axt]
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
Axt ,
Have you tried acidifying the AgNO3 solution with nitric acid , to see if you
get the double salt ? I'll check some references I have for the usual acetylide
double salt and get back on this . The
reaction is pH dependent and different
products may result for the usual acetylide , so this reaction may be similar .
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
To quote the label;
"MPS* GAS
Methylacetylene Propadiene, Stabilized"
56% CAS 68476-85-7
44% CAS 59355-75-8
I think is about the same thing as MAPP but with a stabilizer of sorts. I do get the same product as you but mine has absolutly no noticable flame
once ignited, just the cloud of silver dust( Damn my fingertips are black)
EDIT: Rosco when I made mine I disolved my silver in an (large)excess of nitric acid then bubbled gas through and my product was very similar to
Axt's
EDIT2: googled the CAS numbers and found out it is 44% MAPP and 56% "A fuel mixture of propane, propylene, butanes & butylenes"
[Edited on 2-10-2004 by rogue chemist]
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
Rosco, No I havn't, and I wont get a chance to try now, won't make it home again for a couple months. Maybe the strange greeny precip was a
double salt of the chloride, it only formed in mass when MAPP was bubbled through it. It was completely non-energetic, but it gave a brilliant blue
when hit with the flame.
EDIT: RC, thats sounds like the same stuff, 44% MA-P 56% P --> MAPP.
[Edited on 2-10-2004 by Axt]
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
US2483440 describes some of the different concentrations and pH conditions which produce quite different
compounds . The concentration of the
solution of AgNO3 should be kept below 10% and other references say slightly acid , IIRC , in order to produce the
double salts . PATR may have some
information on these details .
See PATR vol. 1 page A-80
[Edited on 2-10-2004 by Rosco Bodine]
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
Seems that the patent reference provided shows that straight AgNO3 should create the double salt, since HNO3 is created during the reaction. PATR
mentions the ammonia soluton to give the straight acetylide.
It also says the high concentrations of AgNO3 will give higher complexes, that while non-explosive with the acetylide may be beneficial with the
methyl acetylide as to even up the oxygen balance. Bloody expensive but it would be a good idea to try highly concentrated AgNO3 solutions.
The difference in weight of the SMA and the complex wouldnt be much, so you would have to create quite a batch to confirm any differences, but luckily
the complex will weigh more, so if you achieve higher then theoretical yields its a near certainty that you have a complex.
PATR gives the cuprous chloride complex of acetylide as being non-explosive, so its possible that it was what I got with a simular solution.
[Edited on 2-10-2004 by Axt]
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
