Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: SO2 From CuSO4?
K12Chemistry
Hazard to Self
**




Posts: 63
Registered: 3-1-2013
Member Is Offline

Mood: No Mood

[*] posted on 18-4-2013 at 09:48
SO2 From CuSO4?


Does anyone know how i can extract sulfur dioxide from copper sulfate? I am trying to make sulfuric acid without using the electrochemical process. Just so you know the electrochemical process works fine and I can make acid from it it's just I want to try a different method.



View user's profile View All Posts By User
Fantasma4500
International Hazard
*****




Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline

Mood: dangerously practical

[*] posted on 18-4-2013 at 11:10


i believe that CuSO4*5H2O just past 100*C goes into CuSO4 (anhydrous)
after this IIRC theres about 8-900*C to the decomposition of CuSO4
and i believe you get SO3 and CuO at this point..

CuSO4 > CuO + SO3

i think your best bet is using MnO2 and NaHSO4 (im quite sure this will react)
if not then NaHSO3 (you need SO2 to make this tho) + MnO2

if NaHSO4 does work then mix 1:1 molar ratio NaOH H2SO4 (:

i mixed up +40g NaHSO3 and NaHSO4 to mix with MnO2 to make MnSO4 and then later MnCO3
before i knew it i had an very aggresive amount of SO2..
this is where i state that ammonia is fantastic

if just NaHSO4 works it will be somewhat easy to generate pretty pure SO2

edit: forgot to read the use for this
seems it wont be a good way to use NaHSO4 after all

[Edited on 18-4-2013 by Antiswat]




~25 drops = 1mL @dH2O viscocity - STP
Truth is ever growing - but without context theres barely any such.

https://en.wikipedia.org/wiki/Solubility_table
http://www.trimen.pl/witek/calculators/stezenia.html
View user's profile View All Posts By User
Eddygp
National Hazard
****




Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline

Mood: Organometallic

[*] posted on 28-4-2013 at 11:03


I'm not sure... instead of getting CuO and SO3 you might get the next reaction. SO3 isn't as stable as SO2, although I reckon that your reaction might be possible. Just thinking aloud:
2CuSO4 = 2CuO +2SO2 +O2




there may be bugs in gfind

[ˌɛdidʒiˈpiː] IPA pronunciation for my Username
View user's profile View All Posts By User
elementcollector1
International Hazard
*****




Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline

Mood: Molten

[*] posted on 28-4-2013 at 13:00


Apparently, hot concentrated H2SO4 and Cu (sort of related) can release SO2.

[Edited on 28-4-2013 by elementcollector1]




Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
View user's profile View All Posts By User
Fantasma4500
International Hazard
*****




Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline

Mood: dangerously practical

[*] posted on 28-4-2013 at 13:11


Quote: Originally posted by elementcollector1  
Apparently, hot concentrated H2SO4 and Cu (sort of related) can release SO2.

[Edited on 28-4-2013 by elementcollector1]


i guess you found out this by yourself? (:

conc. H2SO4 produces SO3 when its around 300*C so you should definately be able to tell difference on if the reaction produces SO2 or if the H2SO4 was decomposing..
i guess you know the difference, very interesting..




~25 drops = 1mL @dH2O viscocity - STP
Truth is ever growing - but without context theres barely any such.

https://en.wikipedia.org/wiki/Solubility_table
http://www.trimen.pl/witek/calculators/stezenia.html
View user's profile View All Posts By User
elementcollector1
International Hazard
*****




Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline

Mood: Molten

[*] posted on 28-4-2013 at 19:42


Actually, no, from Wiki if I recall.



Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
View user's profile View All Posts By User
K12Chemistry
Hazard to Self
**




Posts: 63
Registered: 3-1-2013
Member Is Offline

Mood: No Mood

[*] posted on 6-5-2013 at 05:37


Actually I'm trying to make sulfuric acid. So I can't use sulfuric acid to make sulfuric acid :D.



View user's profile View All Posts By User
KonkreteRocketry
Hazard to Others
***




Posts: 165
Registered: 12-11-2012
Location: Dubai
Member Is Offline

Mood: No Mood

[*] posted on 6-5-2013 at 07:34


Has any one tried handling liquid SO3 ?
View user's profile View All Posts By User
weiming1998
National Hazard
****




Posts: 616
Registered: 13-1-2012
Location: Western Australia
Member Is Offline

Mood: Amphoteric

[*] posted on 6-5-2013 at 08:13


Quote: Originally posted by KonkreteRocketry  
Has any one tried handling liquid SO3 ?


Pure liquid SO3 is not exactly the most desired form of SO3 if you want to store it, due to its reactivity and its ability to polymerize to a solid form. Thus, it is usually handled as a solution of it in concentrated H2SO4, which is much more common and can even be bought commercially.

Making sulfuric acid out of SO3 is certainly a no-go if you don't have any sulfuric acid to start with. Directly adding pure SO3 to water will result in a very violent reaction that produces corrosive, difficult to condense fumes of sulfuric acid.

[Edited on 6-5-2013 by weiming1998]
View user's profile View All Posts By User
Eddygp
National Hazard
****




Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline

Mood: Organometallic

[*] posted on 6-5-2013 at 13:07


Making sulfuric acid with SO3 might be very difficult in a home lab. I think you'd be better off buying it, despite being complicated sometimes too.



there may be bugs in gfind

[ˌɛdidʒiˈpiː] IPA pronunciation for my Username
View user's profile View All Posts By User
blogfast25
International Hazard
*****




Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline

Mood: No Mood

[*] posted on 6-5-2013 at 13:31


Any starting point should use the sticky thread as a point of reference.



View user's profile View All Posts By User

  Go To Top