Pages:
1
2 |
bhattshivamm
Harmless
Posts: 11
Registered: 24-2-2013
Location: India
Member Is Offline
Mood: No Mood
|
|
Precipitation of Cromium(III)
i have potassium dichromate... after reducing with sodium metabisulfite, i got a nice and clear green solution [Cr(III)] as I should. but i am
interested in precipitating Cr(III) out of the solution... i tried sodium hydroxide, potassium hydroxide to precipitate Cr(III) as chromium hydroxide,
but I couldn't. then i tried with oxalic acid, sodium oxalate and potassium oxalate, but no luck. then i tried to precipitate it as chromium carbonate
by sodium carbonate and sodium carbonate, but again, i got nothing out of it. finally i tried to precipitate it in the form of benzoate using
saturated solution of sodium benzoate, but.... but..... ![:(](./images/smilies/sad.gif)
i know that chromium tends to form various complexes in solution by reacting with excess OH- and ions like that. but i tried every possible
concentrations of the solutions....not a single reaction could precipitate Cr(III).... plz help me out.
|
|
Endo
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 124
Registered: 5-1-2006
Location: USA
Member Is Offline
Mood: Cold
|
|
Have you tried ammonia?
Cr3+(aq) + 3NH3(aq) + 3H2O(l) <==> Cr(OH)3(s) + 3NH4+(aq)
I believe that if you use an excess amount amount of ammonia the solubility of the precipitate decreases.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
If you use an excess of ammonia, the Cr(OH)3 redissolves into ammonium chromate. You have to use just the right amounts of a weak base, such as Na2CO3
or NaHCO3.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
If you use an excess of ammonia, you will get complex ions such as [Cr(NH3)6]3+. Add the sodium carbonate and give
it time. Chromium(III) compounds are notoriously slow to react with a lot of things.
[Edited on 28-2-2013 by DraconicAcid]
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by elementcollector1 ![](images/xpblue/lastpost.gif) | If you use an excess of ammonia, the Cr(OH)3 redissolves into ammonium chromate. You have to use just the right amounts of a weak base, such as Na2CO3
or NaHCO3. |
That's unlikely: NH3 is too weak an alkali to dissolve Cr(OH)3. But Cr (III) does form an ammonia complex: Cr(NH3)6(3+). It would take strong NH3 and
time and a lot of shaking to get Cr(OH)3 to dissolve in it though...
[Edited on 28-2-2013 by blogfast25]
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1850
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Did you heat the solution? If you boil chrome alum solution it will turn green and not precipitate with most reagent. It slowly turns purple again in
the cold and will the precipitate with NaOH etc. A precipitate will form slowly.
This is why when preparing many Cr3+ complexes it is first reduced to Cr2+ and then allowed to oxidize in the presence of an excess of the new ligand
(check out the chromium complex preparation in Brauer (forum library))
|
|
bhattshivamm
Harmless
Posts: 11
Registered: 24-2-2013
Location: India
Member Is Offline
Mood: No Mood
|
|
actually, I am running out of ammonia right now, I would try it in a few days...
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Do not use sulfite or bisulfite as reductor for dichromate to chromium(III). You get a green solution and this green complex is a remarkably stable
anionic sulfato-complex of chromium. Once you have this complex you need to wait for weeks (!!) to get free chromium(III) again.
If you use ethanol as reductor and assure that the liquid remains cold, then you get a purplish/greyish solution of hydrated Cr(3+) ions and from that
solution you easily can precipitate chromium(III) with just enough NaOH or with slight excess of ammonia. The reduction with ethanol must be done with
dichromate, dissolved in dilute sulphuric acid. If the temperature remains low, then you don't get the green sulfato complex. Even better is to
dissolve the dichromate in dilute (e.g. 5%) nitric acid. If you use dilute nitric acid, then you get no complex and the solution becomes purplish/grey
even if the liquid becomes somewhat warmer. If the nitric acid is dilute, then the acid itself does not act as oxidizer, it just acts as acid.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Woelen: hydrochloric acid should work, no? In dilute solution of course.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
I'm assuming sulfuric acid works the same way?
That would explain a LOT, actually.
I guess I'll distill my hydrochloric to get rid of the iron contamination, and reduce my chromate with that instead. Then probably boil down to get
rid of excess hydrochloric, and precipitate with baking soda...
The only problem with this synth is, filtering has taken weeks due to the sticky, muddy ferric hydroxide I've had to separate out, as well as the fact
that I now have 3-4 liters of chromate solution. Fun.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
No, hydrochloric acid does not
work. The chloride does not reduce the dichromate, but when it is present while dischromate is being reduced, then it imemdiately attaches to the
formed Cr(3+) and forms a chloro-complex, which again is very stable and once the chloride is attached to the chromium, you have to wait a LONG time
before you have free aqueous Cr(3+) again.
Yes, chromium(III) is an interesting, but also quite annoying ion. It coordinates to almost everything very quickly during the short period of its
formation, but once it has reached a stable coordination-state, it hardly is willing to exchange ligands. For this reason, synthesis of special
chromium(III) complexes usually is not done with chromium(III) salts as starting point, but with hexavalent chromium as starting point, or
chromium(II) as starting point.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
What acid does work to obtain Cr(III) ions, then? Remaining possibilities are nitric and possibly oxalic (sulfuric is discounted, as mentioned
earlier).
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
ScienceSquirrel
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
The best approach from a dichromate salt is to dissolve it in sulphuric acid and then add ethanol dropwise keeping the temperature low.
You can use any ethanol source that you like, purple methylated spirits works well, the important thing is to keep it cool, this will stop the
sulphate moving in as a ligand.
It is the classic way to make chrome aluim and was a standard lab preaparation to teach technique for years.
Aternatively you can use 30% hydrogen peroxide as the reducing agent, this will run at 10 C and give you a simple uncomplexed chromium III solution.
It goes through a blue chromium peroxide intermediate that forms a complex with and extracts into diethyl ether.
It will easily form brilliant blue needles on evaporation of the ether.
http://en.wikipedia.org/wiki/Chromium_peroxide
The colour changes are nice.
Pale yellow dichromate goes to darker yellow chromate on addition of sulphuric acid, then blue on addition of hdrogen peroxide, oxygen effervesces and
the solution turns green.
Take care, do it on a small scale and impress the socks off the next generation of chemists.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Quote: Originally posted by elementcollector1 ![](images/xpblue/lastpost.gif) | What acid does work to obtain Cr(III) ions, then? Remaining possibilities are nitric and possibly oxalic (sulfuric is discounted, as mentioned
earlier). | I did not discount sulphuric acid, but you have to keep the reaction vessel cool, as
ScienceSquirrel also mentions. I discounted sulfite as reductor.
Oxalic acid is totally useless for the purpose of making free aqueous chromium(III). If you use oxalate or oxalic acid then the reduction of
dichromate leads to formation of an intenely colored deep purple oxalato complex of chromium(III). A rather interesting experiment is to add oxalic
acid to a dilute solution of sodium dichromate or potassium dichromate. The result is a very dark purple solution.
The only acids which can be used for making free aquated chromium(III) ions are:
- dilute sulphuric acid (not above 40 C, otherwise sulfato complex formation)
- dilute nitric acid
- dilute perchloric acid
- dilute tetrafluoroboric acid
The latter two acids are not very common, especially HBF4 is not something you can easily find as a home chemist.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Dilute sulfuric it is, then. How dilute? <20%?
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
You can work out the amount of H2SO4 needed from the stoichiometric equation to obtain Cr2(SO4)3.
C2H5OH + H2O === > CH3COOH + 4 H+ + 4 e- (oxidation of ethanol)
Cr2O7(2-) + 14 H+ + 6 e- === > 2 Cr3+ + 7 H2O (reduction of dichromate)
Now balance and complete! (5 marks)
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Gah, I hate these. I much prefer full reactions, anyway. Net ionic and half-reactions just don't click for me, full reactions do. (In fact, on our
recent chemistry test, this was the only type of question I failed. Fortunately, there was only one of them.)
But enough whining, let's give this a shot...
7 C2H5OH + 7 H2O -> CH3COOH + 28H+ + 28e-
2 Cr2O7(2-) + 28 H+ + 12 e- -> 4 Cr(3+) + 14H2O
Those darn electrons.
3 C2H5OH + 3 H2O -> 3 CH3COOH + 12H+ + 12e-
2 Cr2O7(2-) + 28 H+ + 12e- -> 4 Cr(3+) + 14 H2O
Those darn hydrogen ions.
...
Well, I'll just use regular stoichiometry, then. Replaced ethanol with isopropanol for availability issues.
Na2Cr2O7 + 4 H2SO4 + 3 C3H8O -> 3 C3H6O + Cr2(SO4)3 + Na2SO4 + 7 H2O
Huh. This looks familiar. A Cr2O7(2-) ion, 4 H+'s, 7 H2O's...
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
ScienceSquirrel
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
There is a preparation here
http://books.google.com/books?id=v5xLjrMEZ1QC&pg=PA208&a...
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
I'm too lazy to fully check it but your result looks perfect to me, on the face of it.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
I tried precipitation of Cr(OH)3 using a pure potassium alum that I got recently. I got an initial precipitate with KOH, but it seemed to 'disappear'!
The solution was initially purple, but switched to green over time. Addition of baking soda caused two layers to form, with the extremely dark
chromium layer on bottom and the baking soda on top, with a purple-seeming precipitate in between. Odd... And it doesn't bode well for my chromate, as
if I can't get the pure stuff to do what I want...
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
If the green chromite solution is boiled, there is hydrolysis or something, and hydroxide reprecipitates.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Seriously? I'll give that a go, then. Unfortunately, it's late. Will post results and possibly pictures tomorrow.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Beware of temperature, as SS mentioned. Above a certain temperature stable Cr(III)-sulphato complexes form that do no behave like 'naked' Cr3+. It
happened to me. The sulphato complex can take months to disintegrate back to 'normal' Cr3+, from which Cr(OH)3 can be precipitated.
That preparation referred to by Squirrel looks very sound.
[Edited on 3-3-2013 by blogfast25]
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Here is a good internet available source, Atomistry (link: http://chromium.atomistry.com/chromic_hydroxide.html ). To quote some interesting parts:
"Chromic Hydroxide, Cr2O3.Aq., is obtained by precipitation of a solution of a chromic salt by means of potassium hydroxide; if excess is used, the
precipitate dissolves, forming a green solution from which the hydroxide is again precipitated on keeping or boiling. Such precipitate retains alkali
which cannot be removed by repeated washing with hot water; it is usual, therefore, to employ ammonium hydroxide as the precipitating agent. Even in
this case, excess of ammonia dissolves chromic hydroxide, yielding a reddish-violet solution: methyl-amine behaves similarly, but di- and
tri-methylamine at once precipitate chromic hydroxide completely. When freshly formed, the precipitate appears to be a well-defined chemical compound,
the solubility product of which, according to Bjerrum, is 4.2×10-16 at 0° C. and 54×10-16 at 17° C. in 0.0001 molar units. According to Weiser,
however, the precipitate obtained by the addition of alkali to solutions of chromic salts does not contain any definite hydrate. In the cold, the
freshly formed precipitate readily dissolves in acids, but becomes insoluble on keeping or heating; between these two extremes of solubility an
indefinite number of hydrous oxides exists. By precipitating at temperatures ranging from 0° C. to 225° C., products have been obtained varying in
colour from greyish blue to bright green. Since most of the chromic salts exist in two distinct modifications, the violet and the green, it has long
been assumed that there must be two isomeric chromic hydroxides corresponding to these two series of salts. Such isomerides have not, however, been
isolated. The properties of chromic hydroxide vary considerably with age, especially as regards solubility in acids and alkalies, and the "ageing" is
accelerated if the precipitate is allowed to remain under alkaline solution; the rate appears to increase with hydroxyl-ion concentration and also
with increase of temperature, and the change in properties appears to be due to change in the size of the particles."
On Colloidal Chromium Hydroxide, to quote:
"The hydrosol is obtained as a deep green solution by the peptisation of the hydroxide by means of chromic chloride, or by a solution of copper oxide
in ammonia. As already stated, the freshly precipitated hydroxide forms an apparently clear green solution with excess of an alkali hydroxide. That
the chromic hydroxide is peptised and not dissolved is shown by the fact that it can be completely filtered out by means of a collodion filter,
leaving a colourless filtrate. The colloidal solution is stable while hot, but slowly yields a gel on keeping at ordinary temperatures."
And also, "When potassium hydroxide is added to solutions containing ferric chloride and chromium sulphate in varying proportions, the iron is not
precipitated so long as the chromium is present in excess."....
Of possible value note that if the FeCl3 is in excess, it is also precipitated along with any adsorbed chromium.
Interestingly, both positively and negatively charged colloids have been prepared. Positive charged when the hydrated oxide is peptised with chromic
chloride, or by hydrolysis of the chloride or nitrate. The negatively charged has been created by peptising the hydrous oxide with sodium or
potassium hydroxide.
Now, with respect to Chromic oxide jellies, they can be created, to quote "by adding sodium or potassium hydroxide or ammonia to a solution of chromic
sulphate or chloride containing sodium acetate; or by adding sodium or potassium hydroxide, but not ammonia, to a solution of chrome alum. The jelly
is violet if prepared by the addition of ammonia or of a slight excess of the alkali metal hydroxide; if the latter is added in larger quantity the
jelly is green. The jellies dissolve in hydrochloric acid, but re-form on neutralising the solution if sufficient sodium acetate is present."
-------------------------------------------------------------
My take on this with respect to the preparation and use of Cr(OH)3:
1. Precipitate from a chromic salt by means ammonium hydroxide (avoid KOH), but not an excess of ammonia as it dissolves chromic hydroxide, yielding a
reddish-violet solution.
2. Dissolve the freshly formed precipitate in an acid, but employ as soon as possible as the Cr(OH)3 becomes insoluble on keeping or heating.
For a hydrosol (a deep green solution) can be prepared by the peptisation of Cr(OH)3 with a solution of copper oxide in ammonia. Note, a cited
creation of a colloidal suspensions of copper oxide (CuO) nanoparticles is via an alcothermal method with reaction of copper acetate and sodium
hydroxide in the presence of acetic acid in ethanol at 78°C (see http://onlinelibrary.wiley.com/doi/10.1111/j.1551-2916.2006.... ). Perhaps substituting aqueous ammonia (not in excess) for NaOH, resulting in a
larger nanoparticle, may be acceptable.
[Edited on 3-3-2013 by AJKOER]
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
"Even in this case, excess of ammonia dissolves chromic hydroxide, yielding a reddish-violet solution: methyl-amine behaves similarly, but di- and
tri-methylamine at once precipitate chromic hydroxide completely."
The 'reddish-violet' is the hexa-ammonia complex. Obviously the methyl amines do not form such complexes.
|
|
Pages:
1
2 |