MR AZIDE
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 64
Registered: 21-5-2012
Location: UNITED KINGDOM
Member Is Offline
Mood: Fizzing
|
|
Nitrogen Triiodide
I have easy access to 10% ammonia soln, and had synthesized a few Grams of nice iodine powder a few weeks ago, which is now happily sitting in the
sample tube turning the polytheme lid black .
Question is, is the 10% ammonia soln, concentrated enough to make the NI3.......????
If so how long does the iodine need to be immersed in the solution, to react to NI3..........
Im just curious Ive never made any of this stuff before, If I make some NI3, it will just be a very small amount, as a chance to observe its
instability.
|
|
Ral123
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 735
Registered: 31-12-2011
Member Is Offline
Mood: No Mood
|
|
It's not like we are all exploding iodine experts Everybody has done it,
nobody has kept interest in it.
|
|
TheAMchemistry87
Harmless
Posts: 16
Registered: 12-6-2012
Member Is Offline
Mood: Happy
|
|
it is if the ammonia is close to the iodine to check tap it hard with proper protection gloves,faceshield etc. if it blows up you made nitrogen
triiodide
|
|
hodges
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 525
Registered: 17-12-2003
Location: Midwest
Member Is Offline
|
|
I remember some years back doing a test making nitrogen tri-iodide using both concentrated and household NH4OH. They definitely both worked; as I
recall the product made with weak NH4OH was more sensitive.
I was once even able to get a "bang" from a kewlish experiment mixing tincture of iodine (do they even still make that?) and household ammonia.
Didn't think it could actually be done that easily but it did work. As I recall, I used the whole bottle of tincture of iodine since there is so
little actual iodine in it.
[Edited on 6/16/12 by hodges]
|
|
bahamuth
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
I have made several hundred of grams og nitrogen triiodide divided over several batches by grinding iodine crystals in a mortar covered by ammonia,
dilute or concentrated doesn't matter much but a more stable product is achieved by the concentrated ammonia. The product may be washed with ethanol
but not with acetone to remove water, water degrades the product, and stored wet with ethanol for quite some while before total degradation. In my
experiments nitrogen triiodide reacts with ketones forming lachrymatory compounds.
A fun party trick is to drop ethanol wet nitrogen triiodide blobs somewhere and observe when they dry and someone distrubs them![:P](./images/smilies/tongue.gif)
Any sufficiently advanced technology is indistinguishable from magic.
|
|
JustMe
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 111
Registered: 7-8-2003
Member Is Offline
Mood: No Mood
|
|
In the really old days they would make land mines for flies.
Wet paper with dilute sugar water, tear it up into small pieces and spread the nitrogen iodide onto the pieces, separate them and leave them to dry.
Keep in mind that dry NI3 is very dangerous!!!!
So a fly would be attracted to a piece, land and be disintegrated. I heard it was great fun, although I never did it. My experience with NI3 consisted
of encountering some the first day I attended college. Walking up the stairs to a dorm I noticed a black powder spread thinly on the steps and purple
stains. Ah ha! Somebody had placed this as a joke. Some joke! Fortunately there wasn't a lot and it was spread thinly... Still there were small puffs
and bangs as people walked across it. Ah, the 1970's - so innocent compared to today. LOL
|
|
mineralman
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 64
Registered: 15-6-2012
Location: WALES UK
Member Is Offline
Mood: complicated
|
|
BET ME TO IT,,,, THE EXPLODING PURPLE PUFF OF NTI SMOKE FLY KILLER.
Best time with it..I came up with the idea of soaking cartridge paper in it, cut into squares and placed under the toilet seat feet, useing some
corragated card to leave enough space for it to dry in place untill my woman got back from work and set the stuff off. he he he MM
|
|
plante1999
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Quote: Originally posted by mineralman ![](images/xpblue/lastpost.gif) | BET ME TO IT,,,, THE EXPLODING PURPLE PUFF OF NTI SMOKE FLY KILLER.
Best time with it..I came up with the idea of soaking cartridge paper in it, cut into squares and placed under the toilet seat feet, useing some
corragated card to leave enough space for it to dry in place untill my woman got back from work and set the stuff off. he he he MM
| It's not funny, you can injure her with an energetic compound.
I never asked for this.
|
|
dann2
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1523
Registered: 31-1-2007
Member Is Offline
Mood: No Mood
|
|
Killing flies using this method was banned in 1983 (or there abouts).
|
|
mineralman
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 64
Registered: 15-6-2012
Location: WALES UK
Member Is Offline
Mood: complicated
|
|
I didn't produce a powerfull TNI, iF ID WEIGHED, CALCULATED, ADJUSTED FOR OPTIMUM TEMPS AND MOST IMPORTANTLY "NOT POSITIONED THE CORROGATED CARDBOARD
TO PREVENT SUCH THINGS HAPPENING, THEN i WOULD HAVE TO AGREE. (Oops) But I do have an understanding of explosives and controling energetic direction.
other factoring in info, like she sits foward with minimal weight when first she gets back from work, later on when she forgets shes not still in the
factory and 500 strange women haven't used the loo seat previously, I wouldn't have even concidered it.
But thanx for pointing it out, I have a tendancy to forget there are others out there who don't fully understand that its one of the most dangerous
and highly explosive compounds in the world, and as such its never made in large quantaties as a puff of wind can set it off. MM
|
|
mineralman
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 64
Registered: 15-6-2012
Location: WALES UK
Member Is Offline
Mood: complicated
|
|
WHO'S RESPONSABLE FOR THE POLICEING OF THAT LAW THEN?LOL
What prompted it to get that much attention? anyone try using it?
|
|
Swede
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 491
Registered: 4-9-2008
Member Is Offline
Mood: No Mood
|
|
NI3 is an amusing lab curiosity when made in insanely small amounts. Tiny flecks go off with the noise of one of those throwing popper fireworks
toys, and as described in this thread can be used for some fun tricks when some intelligence is applied... like never making more than a few
milligrams at most.
I have heard of a thumbnail being lost when a coin was coated with too much NI3 and set in a public area.
One standard trick was to scoop minute amounts (wet, of course) into a flexible metal lab spatula. Give it a strong flick in a hallway, and the
hallway is seeded with invisible amounts, well spread out. When done properly, anyone walking on it sounds exactly like a guy walking on rice
krispies cereal or similar. Crunch, crackle... Their puzzlement is what makes it so funny, because the flecks are literally too small to see They check the bottoms of their shoes, and basically skedaddle out of there.
|
|
dann2
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1523
Registered: 31-1-2007
Member Is Offline
Mood: No Mood
|
|
According to Kurk Saxon the stuff makes great stuff for getting rid of rats. Spread it around and it terrifies them so much they leave the premises.
(I have me doubts)
Dann2
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
About the structure of this compound, I think it can best be described as an adduct.
The NH3 is electron-donating to the iodine atoms in the other nitrogen atom, and so it is able to bond.
[+]H3N–NI3[-]
The iodine atoms, because there is an extra electron, are also able to cross-polymerize, much like how and iodide ion can combine with elemental
iodine to form the triiodide ion, I3[-]. There is probably some complex resonance going on, and the negetive charge is distributed over several iodine
atoms. Many of the bond orders are probably less than one.
[Edited on 13-7-2012 by AndersHoveland]
|
|
watson.fawkes
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AndersHoveland ![](images/xpblue/lastpost.gif) | About the structure of this compound, I think it can best be described as an adduct.
The NH3 is electron-donating to the iodine atoms in the other nitrogen atom, and so it is able to bond.
[+]H3N–NI3[-] | Provide a citation. I am sure that the actual crystal structure of NI3 is known.
There's no need to fantasize one. Go find the relevant paper and report back here.
|
|
Morgan
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1677
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
I have read some literature that adds KI or ammonium iodide and was wondering if there is any real benefit.
One time I made some in high school with the approval of the vice principal and chemistry teacher and took most of it home. I guess that wouldn't fly
in today's world. In English class I had very tiny amounts I played at my desk which made barely audible pops and crackles, the teacher heard
something but continued on not quite sure if she had heard something or not.
After chemistry class the chemistry teacher and a few classmates played with it, you could actually feel your foot lift off a little when you stepped
on it. There was a crowd that gathered outside the classroom curious about what was going on in the room.
That evening the chemistry teacher called my home and she cautioned me to be careful with it.
|
|
arsphenamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 236
Registered: 12-8-2010
Location: I smell horses, Maryland, USA
Member Is Offline
Mood: No Mood
|
|
As I model the NI3 monammine, it looks like the adduction is between the non-bonding NI3 pair and H-N HOMO, a hydrogen bond of
sorts in which the N:H distance is ~2.8Å and constrained by Van der Waals effects from the iodine.
Like many ionic compounds (NaCl, P3N5), the adduct is an 'infinite' lattice in solid form.
|
|
froot
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 347
Registered: 23-10-2003
Location: South Africa
Member Is Offline
Mood: refluxed
|
|
Many years ago I also played the fool with this stuff. Drilled a small hole in the end of a piece of chalk-board chalk and proceeded to load it with a
small amount of wet NI3. The chalk would soak the moisture away and it would dry fairly quickly. Lets just say the result justified the punishment.
When a college I laid wet piles on the railing on the 5th floor overlooking an indoor atrium and went to class afterwhich I'd simply push the now dry
piles over the edge with a piece of paper.
We salute the improvement of the human genome by honoring those who remove themselves from it.
Of necessity, this honor is generally bestowed posthumously. - www.darwinawards.com
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Two points. I recall reading that the power of an explosion versus the mass increases roughly by a cube law. So, if you increase the weight by a
factor of 10, the power of the explosion may increase in the vicinity of a thousand fold (translation, serious injury and/or death becomes more
likely).
I also recall reading somewhere on this forum of a high school chem student, who unknown to the teacher, made a more than a small quantity of NI3.NH3.
It exploded in his face (luckily he was wearing eye protection). For days, he had to bear the embarrassment of walking around with a purple face.
Let's not all learn the hard way.
[Edited on 17-7-2012 by AJKOER]
|
|
Morgan
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1677
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
I read an account in a chemistry manual where some exploded in a flask that was still damp causing injury. I don't know how likely that is to happen
but yes it's always a good idea not to make more than you want to explode in your face.
|
|