electrokinetic
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 6-6-2012
Location: Rhuidean
Member Is Offline
Mood: No Mood
|
|
Copper solution mystery
I'm adding sodium carbonate, in excess, to a solution of copper chloride and no precipitate is forming. I know there's copper still dissolved because
the solution is still blue. Any ideas what's going on here?
|
|
MrTechGuy1995
Harmless
Posts: 27
Registered: 21-9-2011
Location: Chatham, New Jersey
Member Is Offline
Mood: Lab Envy
|
|
Must be the presence of an acid, most likely HCl. Under acidic conditions, CuCl2 is a blue solution, under basic, it's green.
The acid must be reacting with the Sodium Carbonate, Is it bubbling at all?
Currently in college, studying Computer Science. Missing my home laboratory, and all the fun things I got to do. Still trying to explore the outskirts
of chemistry for curiosities sake.
|
|
plante1999
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
basic solution will make cuprate salt with copper ion.
I never asked for this.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
With carbonate ion you won't get a cuprate salt in solution, but a precipitate of mixed copper hydroxide/carbonate. If your salt is CuCl2, then the
precipitate also will contain chloride ions and you get a green basic copper chloride/carbonate.
Cuprate ion only is formed at very high pH over 14. This only is achieved in fairly concentrated solutions of NaOH or KOH. These cuprate solutions
have a nice deep blue color.
Was the CuCl2 home-made? A very common impurity is HCl in such homemade material and then you can add quite some carbonate to such a solution, before
precipitation occurs.
[Edited on 7-6-12 by woelen]
|
|
nezza
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 324
Registered: 17-4-2011
Location: UK
Member Is Offline
Mood: phosphorescent
|
|
Does the solution contain any ions which complex with copper such as citrate. In the presence of sufficient citrate no precipitate will form with
carbonate ion.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by electrokinetic ![](images/xpblue/lastpost.gif) | I'm adding sodium carbonate, in excess, to a solution of copper chloride and no precipitate is forming. I know there's copper still dissolved because
the solution is still blue. Any ideas what's going on here? |
Keep goin' till it stops fizzin' And then some more...
|
|
electrokinetic
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 6-6-2012
Location: Rhuidean
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by woelen ![](images/xpblue/lastpost.gif) | With carbonate ion you won't get a cuprate salt in solution, but a precipitate of mixed copper hydroxide/carbonate. If your salt is CuCl2, then the
precipitate also will contain chloride ions and you get a green basic copper chloride/carbonate.
Cuprate ion only is formed at very high pH over 14. This only is achieved in fairly concentrated solutions of NaOH or KOH. These cuprate solutions
have a nice deep blue color.
Was the CuCl2 home-made? A very common impurity is HCl in such homemade material and then you can add quite some carbonate to such a solution, before
precipitation occurs.
[Edited on 7-6-12 by woelen] |
Okay, I see I've come to the right place. Let me be more specific. The copper chloride originally came from coins dipped in HCl (this is an
experiment going on with some interested middle school students in my classroom). The students' goal was to copperplate some old "silver" dollars by
electrolysis. In order to prepare the coins they were put into a dilute HCl solution. Some were left in too long and we got a nice green solution.
I didn't want to electrolyze that solution since I didn't want to produce any chlorine gas at the graphite anode. So the plan was to precipitate out
the copper as basic copper carbonate, and then dissolve it using sulfuric acid to get a solution of copper sulfate. So I added sodium carbonate and
originally got a lot of precipitate that was a dull green color. (I wondered why it was green and not blue and you answered that in your post--I'll
come back to that later). But when the precipitate settled, the solution was still blue. So I added more sodium carbonate. And then more. And then
more.
I finally filtered it out into a separate beaker and tried adding more sodium carbonate. The pH is currently at 9.9 and still no precipitate is
forming. Could something be complexing the copper ions like nezza said? But what could it be? I know there's no citrate in there.
And if I could go back to the green precipitate. So if I understood correctly, at neutral pH rather than basic copper carbonate you get copper
chloride carbonate if chloride ions are present? So what's the best way to separate the chloride from the copper?
Thank you!
|
|
electrokinetic
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 6-6-2012
Location: Rhuidean
Member Is Offline
Mood: No Mood
|
|
I forgot to add that when I was adding the sodium carbonate there wasn't any fizzing at all.
And as an update, I just added a lot of sulfuric acid, got a lot fizzing and the solution turned light green. I'm guessing I did have some kind of
copper complex, but what was the ligand? OH? Maybe a complex like [Cu(OH)4]2-?
And I still need to know how to get rid of the chlorine. That was the problem in the first place!
|
|
Nathaniel
Harmless
Posts: 15
Registered: 5-4-2012
Member Is Offline
Mood: No Mood
|
|
Uf, I just wrote a long post and then realized I misunderstood you somewhere in the middle ![:(](./images/smilies/sad.gif)
So let me just say that I've made the basic copper carbonate quite some times before and I could never bring the solution to colourless no matter how
much carbonate I added...
Now I know that that's because the percipitate is formed in the first place, because the solubility product is reached. If you don't know what that
is:
In solution where there's a salt with very low solubility (in this case basic copper carbonate-I'll use CuCO3 to make it more simple) the
product of concentrations in solution: {Cu2+} x {CO32-} is constant (some very low number...usually 10-10
or lower)
That means that the copper carbonate percipitated because you added carbonate solution--> {CO32-} rises so {Cu2+}
must fall to keep it constant (it leaves the solution as CuCO3)....But no matter how much carbonate you add, the {Cu2+} will
never be zero. Never. It appears that in this case the constant is not that low and a bit more of the copper ions keeps remaining in solution but it
still isn't much, believe me...It's just because the ions are strongly coloured that it looks like it ![:)](./images/smilies/smile.gif)
|
|
electrokinetic
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 6-6-2012
Location: Rhuidean
Member Is Offline
Mood: No Mood
|
|
Well, the solubility product of CuCO3 is 1.4x10-10, but that's for pure CuCO3. We have Cu2(OH)2CO3 and also it seems some other salt contaminated by
chloride. Who knows what their SP's are; I couldn't find them.
After adding the sulfuric acid, the solution is clear, but you're right there are still copper ions floating around in there.
But what's more concerning to me now is how to get rid of the chloride, especially in the precipitate that originally formed. I suppose I could add
silver nitrate and have AgCl precipitate out, but that is too expensive. I'm hoping someone could present a cheaper alternative.
|
|
phlogiston
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1377
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
1. Redisolve in minimal amount of acid (sulphuric/hydrochloric/nitric).
2. Add sodium hydroxide solution to precipitate copper hydroxide as a blue gel
3. Bring to a boil. The copper hydroxide will quickly convert to black CuO which settles readily and is easily filtered.
4. Wash the CuO precipitate repeatedly with water.
5. allow to settle, decant and redisolve in sulphuric acid
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
electrokinetic
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 6-6-2012
Location: Rhuidean
Member Is Offline
Mood: No Mood
|
|
Okay, did that, but the solution turned black and I got a reddish precipitate. No blue gel.
|
|
TheAMchemistry87
Harmless
Posts: 16
Registered: 12-6-2012
Member Is Offline
Mood: Happy
|
|
Check the pH if its low its acidic and you still have HCl what you should do is add more copper (II) oxide until no more is dissolve then filter it
and add the sodium carbonate and you should get a precipitate of copper (II) carbonate if you dont your solution is VERY impure
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
If I look at all the observations, mentioned by electrokinetic, then I get the impression that there is some strong contamination of the solutions.
Such a contamination can severely affect the outcome of all kinds of experiments. The copper, used to make the copper chloride, or the acid, used for
making it probably contained all kinds of impurities (such as iron or salts of iron, or organics).
|
|
phlogiston
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1377
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
I'm beginning to doubt whether it was a copper salt. I've made CuO this way numerous times, usually starting with copper nitrate made by dissolving
metal (from electrical wiring) in acid. What coins did you start with?
Here's (someone elses) movie of what the gel-like copper hydroxide precipitate looks like:
http://www.flickr.com/photos/cmlburnett/4471334146/in/photos...
To confirm it's copper at all, you could do a quick flame test perhaps. Dip the tip of an wire (ideally platinum, but iron will do) in HCl(aq), and
pick up a bit of your copper salt with the moist wire. Hold in a colorless/blue flame and you should get shades of blue and green.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
I agree. Although Cu(OH)2 is very slightly amphoteric, sodium carbonate is not quite basic enough to form Na2CuO2, sodium hydroxide would be needed to
form this.
[Edited on 15-6-2012 by AndersHoveland]
|
|
electrokinetic
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 6-6-2012
Location: Rhuidean
Member Is Offline
Mood: No Mood
|
|
Okay, as for the reddish stuff formed on the first go:
1. I noticed it turning black as it dried on the filter paper.
2. Flame test burned greenish.
Could this red stuff then have been copper (I) oxide? The copper chloride I started with was made when Eisenhower dollars, of the same copper clad
make as quarters and dimes, was left overnight in HCl.
I mixed a separate batch of copper chloride with concentrated NaOH, and voila got exactly the results phlogiston described. Thanks phlogiston! I
can't remember how that particular batch was made. I've washed it a few times, what's the best way to know when it's been washed enough?
I'm expecting great amounts of contamination, btw. I'm a middle school teacher and we do a lot of stuff with copper chloride and copper sulfate, and
I got tired of just dunking Al foil into the used copper to "neutralize" it before pouring down the drain. So isolating copper sulfate and
electroplating it out is more or less a game I made for myself. Thanks to everyone here for their help and suggestions.
|
|
Eddygp
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
Umm, maybe some sort of copper(II) chloride. Possibly... just thinking.
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username
|
|