den_zuk
Harmless
Posts: 2
Registered: 11-11-2011
Location: Bulgaria
Member Is Offline
Mood: dizzy
|
|
How to turn lead into pink-red
Hi there,
I have a question, is it possible to make lead to look like a copper ( i mean in color primary), but i'm not talking surface coloration, idea is when
i cut for example part of lead - all internal visible surface to be colored in pink-red.
I found some process using bismuth, is it the only one option?
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
It's like asking a question can you turn sulphur green, and to still have sulphur. The answer is no.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Ok. What you do is, right, you go to one of them magic shops on the high street and buy a magic wand (you should be able to get some bargains with
X-mas coming up!) Don't forget to buy a decent spell as well: abracadabra is over used!
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by den_zuk  | I have a question, is it possible to make lead to look like a copper [...] all internal visible surface to be colored in pink-red.
I found some process using bismuth, is it the only one option? |
Are you looking for a high-lead alloy with
these properties?
If you're trying to make counterfeit copper, it's likely that the alloying components are more expensive than copper itself.
|
|
|
Wizzard
Hazard to Others
Posts: 337
Registered: 22-3-2010
Member Is Offline
Mood: No Mood
|
|
You could use pink/red tinted sunglasses.
[Edited on 12-9-2011 by Wizzard]
|
|
|
Phosphor-ing
Hazard to Others
Posts: 247
Registered: 31-5-2006
Location: Deep South, USA
Member Is Offline
Mood: Inquisitive
|
|
Why don't you post the example using Bismuth that you were talking about so we know what you're talking about?
[Edited on 9-12-2011 by Phosphor-ing]
"The nine most terrifying words in the English language are: 'I'm from the government and I'm here to help.'" -Ronald Reagan
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
Alloy of lead is alloy of lead. It's not lead anymore.
Pair of pink shades is a good idea, thought everything else would turn pink, too. But in the end, "think pink" isn't such a bad idea, either.
Some pink cellophane wrap might be the thing you need. Make a lead ingot and cover it in pink cellophane. It's still lead, yet it looks pink. It won't
be pink inside, but that's a start.
|
|
|
Wizzard
Hazard to Others
Posts: 337
Registered: 22-3-2010
Member Is Offline
Mood: No Mood
|
|
How about metallic plastic/wax? That may work also, and accepts dyes to be any color you'd like.
Tungsten-doped waxes and plastics can be pretty dense.
http://www.ebay.com/itm/EAR-WEIGHT-TUNGSTEN-POWDER-TIPPING-D...
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination! 
|
|
That must be the strangest product I have ever seen.
|
|
|
sternman318
Hazard to Others
Posts: 121
Registered: 21-4-2011
Member Is Offline
Mood: No Mood
|
|
Well, molten sulfur is red 
http://en.wikipedia.org/wiki/File:Burning-sulfur.png
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
Yes, it's red. Therefore, it's not green. What's your point?
|
|
|
den_zuk
Harmless
Posts: 2
Registered: 11-11-2011
Location: Bulgaria
Member Is Offline
Mood: dizzy
|
|
in fact all of you guys are correct...this bismuth voodoo that my friend gave me was total fake ( some kind of nuclear reaction by my understanding)
i'm trying to make lead to look like a copper from counterfeit point (our guys here check on places where collect these metals only with eyes and with
magnet), and as we know there is a plenty metals that not responding well to magnet forces, but this coating chemistry is deadly regarding lead.
maybe there is a second issue - these two metals are too different in their use - copper is used primary for cables, but it will be very hard to cast
lead into such tiny cables
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
Lead to copper for profit? An alchemist at heart, ehh.
If you can find a vendor that can provide you with a philosopher's stone you could go lead to gold and really make a killing.
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
Mr. Wizard
International Hazard
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
Perhaps he is talking about red lead oxide? Minium Lead Tetroxide
http://en.wikipedia.org/wiki/Lead_tetroxide
[Edited on 10-12-2011 by Mr. Wizard]
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by den_zuk | in fact all of you guys are correct...this bismuth voodoo that my friend gave me was total fake ( some kind of nuclear reaction by my understanding)
|
Nuclear reaction? Sounds like you've been duped twice. A donkey only stubs his toe once!
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: | i'm trying to make lead to look like a copper from counterfeit point (our guys here check on places where collect these metals only with eyes and with
magnet), and as we know there is a plenty metals that not responding well to magnet forces, but this coating chemistry is deadly regarding lead.
maybe there is a second issue - these two metals are too different in their use - copper is used primary for cables, but it will be very hard to cast
lead into such tiny cables |
People who've been handling literally tons of metal per day for years and years of their life will be able to tell them apart, or that something funny
is going on, simply by the feel and look of it; in that it'll be quite a bit heavier than a bucket of copper parts the same size. They won't be happy
if you try that.
People do try it, and have been, for a long time.
The Aztecs used to, but were way ahead of the game as they'd make copper look like Gold.
| Quote: | | In depletion gilding, a subtractive process discovered in Pre-columbian Mesoamerica, articles are fabricated by various techniques from an alloy of
copper and gold, named tumbaga by the Spaniards. The surface is etched with acids, resulting in a surface of porous gold. The porous surface is then
burnished down, resulting in a shiny gold surface. The results fooled the conquistadors into thinking they had massive quantities of pure gold. The
results startled modern archaeologists, because at first the pieces resemble electroplated articles. |
That fooled the Conquistadors for a while, who promptly stole all their stuff on arrival, but it is certainly not going to fool a gold trader today.
<iframe sandbox width="640" height="480" src="http://www.youtube.com/embed/ZXcBx6qIEK4" frameborder="0" allowfullscreen></iframe>
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
I suspect that it is easier to pass off closely related metals like copper and silver than very dissimilar metals like lead and copper.
An item made of copper silver alloy with silver plate on top could be hard to detect without lab tests to determine density or drilling and sample
analysis.
Even moderate adulteration would yield a good profit as copper is so much cheaper than silver.
|
|
|
Wizzard
Hazard to Others
Posts: 337
Registered: 22-3-2010
Member Is Offline
Mood: No Mood
|
|
Don't forget W with a thick plating of Au is indistinquishable by any means other than x-ray without destroying the sample entirely 
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
I would hazard a guess the refineries are already onto that and have a camera photographing or filming all the materials going in. And will destroy
(shred) the sample (find the W) prior to melting it, then check the camera and go back to the supplier, who'll then call the police and give them your
details.
|
|
|
Wizzard
Hazard to Others
Posts: 337
Registered: 22-3-2010
Member Is Offline
Mood: No Mood
|
|
@Peach- Most places keep ingots as-is... They would need to be re-measured and everything, while the ingots are stamped, shaped and serialized.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
