IndependentBoffin
Hazard to Others
Posts: 150
Registered: 15-4-2011
Member Is Offline
Mood: No Mood
|
|
Checking purity of RDX
If one were to prepare a small sample of RDX (about 10g) by the acetylation of hexamine to DAPT (3,7-Diacetly-1,3,5,7-tetraaza[3.3.1]bicyclononane)
and then nitration with 70% nitric acid in the presence of glacial acetic acid, acetic anhydride and ammonium nitrate (scaled down from Ledgard, J.
"Prepratory Manual of Explosives" method), what are the methods used to confirm the purity of the sample?
Explosives testing is out because it won't tell you if a sample is 90% or 99% RDX anyway. Also of interest is in ensuring there are no unstable
secondary byproducts which may sensitise or decompose the otherwise relatively insensitive + stable RDX.
I can sell the following:
1) Various high purity non-ferrous metals - Ni, Co, Ta, Zr, Mo, Ti, Nb.
2) Alkex para-aramid Korean Kevlar analogue fabric (about 50% Du Pont's prices)
3) NdFeB magnets
4) High purity technical ceramics
|
|
|
quicksilver
International Hazard
Posts: 1820
Registered: 7-9-2005
Location: Inches from the keyboard....
Member Is Offline
Mood: ~-=SWINGS=-~
|
|
Purity testing would remain similar no matter the method of synthesis. Melting point, utilitarian attribute, physical microscopic examination of a
carefully re-crystallized sample, etc, etc, etc.
MP should be right at 202 C (use a damn small sample!) As some other nitroamines it's (RDX) found to have a great level of ammonia; thus in a mp test
there should be a characteristic odor.
Much more significantly a well shaped, clean crystal will react to diphenylamine with a vivid blue color.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | RDX (about 10g) by the acetylation of hexamine to DAPT (3,7-Diacetly-1,3,5,7-tetraaza[3.3.1]bicyclononane) and then nitration with 70% nitric
acid in the presence of glacial acetic acid, acetic anhydride and ammonium nitrate (scaled down from Ledgard, J. "Prepratory Manual of Explosives"
method). |
Wouldn't it be easier and simpler to just add hexamine portion-wise to strong nitric acid and drown the mixture . . .
The precipitated RDX, when washed, has sufficient purity for technical purposes, according to Davis!
|
|
|
IndependentBoffin
Hazard to Others
Posts: 150
Registered: 15-4-2011
Member Is Offline
Mood: No Mood
|
|
Yeah but that method requires producing WFNA first. The DAPT method requires 70% nitric acid which is much more readily available.
I can sell the following:
1) Various high purity non-ferrous metals - Ni, Co, Ta, Zr, Mo, Ti, Nb.
2) Alkex para-aramid Korean Kevlar analogue fabric (about 50% Du Pont's prices)
3) NdFeB magnets
4) High purity technical ceramics
|
|
|
IndependentBoffin
Hazard to Others
Posts: 150
Registered: 15-4-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by quicksilver  | Purity testing would remain similar no matter the method of synthesis. Melting point, utilitarian attribute, physical microscopic examination of a
carefully re-crystallized sample, etc, etc, etc.
MP should be right at 202 C (use a damn small sample!) As some other nitroamines it's (RDX) found to have a great level of ammonia; thus in a mp test
there should be a characteristic odor.
Much more significantly a well shaped, clean crystal will react to diphenylamine with a vivid blue color. |
Basically the questions I am trying to answer are:
1) What are the impurities?
2) What are the percentages of impurities?
3) Will the impurities affect the storage, sensitivity and initiation characteristics?
Apologies if I come across wrongly but I can see how the methods suggested can determine whether the sample is impure, but not shed much light on the
above.
I can sell the following:
1) Various high purity non-ferrous metals - Ni, Co, Ta, Zr, Mo, Ti, Nb.
2) Alkex para-aramid Korean Kevlar analogue fabric (about 50% Du Pont's prices)
3) NdFeB magnets
4) High purity technical ceramics
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
I can prepare WFNA fairly easily, but getting my hands on (AC)<sub>2</sub>O is an altogether different matter.
As for Ledgard's tedious and dodgy tome - I wouldn't put a lot of trust therein!
|
|
|
IndependentBoffin
Hazard to Others
Posts: 150
Registered: 15-4-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by hissingnoise | I can prepare WFNA fairly easily, but getting my hands on (AC)<sub>2</sub>O is an altogether different matter.
As for Ledgard's tedious and dodgy tome - I wouldn't put a lot of trust therein!
|
What country are you in? I was able to buy acetic anhydride OTC in the UK.
Can acetic anhydride be conveniently prepared in a laboratory setting? I've read the wiki:
http://en.wikipedia.org/wiki/Acetic_anhydride
...but am unsure how easily the precursors and catalysts are obtained, what the costs are and how safe the process is.
Lots of typos in Ledgard's tome but is there anything factually incorrect or downright dangerous in it? I know for a fact some 100% kosher facilities
use it as an energetics production reference.
Or are you hinting that it is possible to directly nitrate hexamine with 70% nitric acid, via a method not described in Ledgard's book?
I can sell the following:
1) Various high purity non-ferrous metals - Ni, Co, Ta, Zr, Mo, Ti, Nb.
2) Alkex para-aramid Korean Kevlar analogue fabric (about 50% Du Pont's prices)
3) NdFeB magnets
4) High purity technical ceramics
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | I was able to buy acetic anhydride OTC in the UK. |
Now that is interesting!
But the operative word here is "was" . . .
I tried about a year ago - even going so far as to converse with a H.O. apparatchik!
He didn't buy my cover story . . .
|
|
|
IndependentBoffin
Hazard to Others
Posts: 150
Registered: 15-4-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by hissingnoise | | Quote: | | I was able to buy acetic anhydride OTC in the UK. |
Now that is interesting!
But the operative word here is "was" . . .
I tried about a year ago - even going so far as to converse with a H.O. apparatchik!
He didn't buy my cover story . . .
|
Is it now? 
The acetic anhydride arrived as recently as a month ago. You can see from the picture the bottle is brand new and still pretty much full.
I also ordered various other (some may say) "dodgy" chemicals around the same time 35% hydrogen peroxide, 70% nitric acid, 98% sulphuric acid, glacial
acetic acid, hexamine, acetone, sodium bicarbonate, alkalis, LP ammonium nitrate, etc.
Granted my first order from one supplier took about 3 months to arrive but it finally did. They kept giving an excuse that the glacial acetic acid was
frozen and they had to order special drum heaters to heat it up and the whole order was delayed because of that, etc. I asked them to ship it
separately but they didn't. So if you or anyone else has a dodgy rap sheet be aware that I suspect the supplier passes on details to HMG to run
checks.
Send me a U2U if you want details of the supplier. And please don't order 25L of acetic anhydride, hexamine, AN and nitric acid in the same order, OK?
[Edited on 2-5-2011 by IndependentBoffin]
I can sell the following:
1) Various high purity non-ferrous metals - Ni, Co, Ta, Zr, Mo, Ti, Nb.
2) Alkex para-aramid Korean Kevlar analogue fabric (about 50% Du Pont's prices)
3) NdFeB magnets
4) High purity technical ceramics
|
|
|
quicksilver
International Hazard
Posts: 1820
Registered: 7-9-2005
Location: Inches from the keyboard....
Member Is Offline
Mood: ~-=SWINGS=-~
|
|
QUOTE:
"Basically the questions I am trying to answer are:
1) What are the impurities?
2) What are the percentages of impurities?
3) Will the impurities affect the storage, sensitivity and initiation characteristics?"
Lower nitrated products generally. Percentage depends on a great deal of variables HOWEVER, the fact that the technique uses lower levels of acid
invites lower nitrated amines. The STANDARD Plant-level production technique is to use 1.50+ acid and a hexamine di-nitrate precursor (in US/UK-NATO
plants, etc).
Impurity WOULD most definitely affect storage properties. Ammonia & formaldehyde, ad nausium..... would bring product to a shelf life of months
instead of years. Technique for discernment is generally re-crystallization with USP grade acetone (no petroleum distillates): you want to see a clear
1mm size broken hex crystal similar to very clean table sugar. Lower nitrated products will often stay in the acetone unless evaporated or temp
transition is extreme, then product appears as fine white/buff powder similar to chalk-like material (non-crystalline powder).
See studies done by G. Hale and Bachmann (sp?)
[Edited on 2-5-2011 by quicksilver]
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
LP Chemicals was the last company I tried!
I'm not really that stuck for the anhydride, though - I find direct nitrolysis easy enough, although I hadda threatened runaway with hex tabs/RFNA,
fairly recently.
Hexamine prepared from formalin and HN<sub>4</sub>OH seems less touchy - better purity, probably.
It's kind of ironic, though, that you can easily get a restricted chemical OTC but something simple like
NH<sub>4</sub>NO<sub>3</sub> is your bottleneck.
I have lbs of it lying around !
|
|
|
IndependentBoffin
Hazard to Others
Posts: 150
Registered: 15-4-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by hissingnoise | LP Chemicals was the last company I tried!
I'm not really that stuck for the anhydride, though - I find direct nitrolysis easy enough, although I hadda threatened runaway with hex tabs/RFNA,
fairly recently.
Hexamine prepared from formalin and HN<sub>4</sub>OH seems less touchy - better purity, probably.
It's kind of ironic, though, that you can easily get a restricted chemical OTC but something simple like
NH<sub>4</sub>NO<sub>3</sub> is your bottleneck.
I have lbs of it lying around !
|
Yup I used those guys to get acetic anhydride. Didn't know you guys were so open about suppliers. The culture in other forums is to be very shy about
these things.
Nah, I can get LR ammonium nitrate. Expensive, but pure.
The fertiliser sourced AN is for rocket fuel, which is a lot less touchy to impurities than HE. For HE (primary or secondary) only the purest stuff
will do.
100g of solid rocket fuel sputtering (likely) or spontaneously combusting (unlikely) because of impurities is bad. 10g of HE going off prematurely
because it is sensitised by an unknown contaminant is a bloody disaster.
I can sell the following:
1) Various high purity non-ferrous metals - Ni, Co, Ta, Zr, Mo, Ti, Nb.
2) Alkex para-aramid Korean Kevlar analogue fabric (about 50% Du Pont's prices)
3) NdFeB magnets
4) High purity technical ceramics
|
|
|
Maniak
Harmless
Posts: 45
Registered: 26-6-2004
Member Is Offline
Mood: No Mood
|
|
RDX prepared via procedures involving acetic anhydride may contain some partial acetoxy derivatives or even acetoxy terminated linear nitramines.
Heating RDX in suspension in 50% acetic acid (or in diluted mother liquor resulting from Bachmann synthesis) to 95-100°C for >60 minutes will
destroy most of these unwanted impurities leaving RDX and HMX nearly unaffected. RDX which is treated this way may still slightly smell like acetic
acid (when stored in a closed container for months), but in my opinion there is no danger of decomposition.
You can try this heating in acetic acid and checking melting point before and after will give you valuable information as well as weight difference.
Bachmann RDX after this stabilization usually possesses mp of >190°C due to some amount of HMX.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | Yup I used those guys to get acetic anhydride. Didn't know you guys were so open about suppliers. |
We're not!
Acquisitions failures we'll talk about but staying mum on successes is a cardinal point.
But seriously, your having a reg. company obviously makes things easier.
There's a plethora of threads here on ketene synthesis, that of acetyl chloride et al . . .
I still love the simplicity of hex/NA though!
|
|
|
holmes1880
dushbag
Posts: 194
Registered: 13-12-2010
Location: http://highexplosivesforum.forumotion.com/
Member Is Offline
Mood: Egregious
|
|
What the hell is going on with deflegration point of RDX? I can't find it anywhere! Every reference only gives its melting point of 202C. 
UPDATE: 260C based on dis:
http://www.teledynerisi.com/products/0products_8td_page02.as...
[Edited on 21-6-2011 by holmes1880]
|
|
|
quicksilver
International Hazard
Posts: 1820
Registered: 7-9-2005
Location: Inches from the keyboard....
Member Is Offline
Mood: ~-=SWINGS=-~
|
|
It's very possible that a deflagration point has independent variables. The elevation, available oxygen, the "type" of deflagartion (i.e. bulk, single
crystal loose, compressed), point of flame contact, etc for an exacting number to be used with the same utility as a MP.
|
|
|
The WiZard is In
International Hazard
Posts: 1617
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by IndependentBoffin | If one were to prepare a small sample of RDX (about 10g) by the acetylation of hexamine to DAPT (3,7-Diacetly-1,3,5,7-tetraaza[3.3.1]bicyclononane)
and then nitration with 70% nitric acid in the presence of glacial acetic acid, acetic anhydride and ammonium nitrate (scaled down from Ledgard, J.
"Prepratory Manual of Explosives" method), what are the methods used to confirm the purity of the sample?
Explosives testing is out because it won't tell you if a sample is 90% or 99% RDX anyway. Also of interest is in ensuring there are no unstable
secondary byproducts which may sensitise or decompose the otherwise relatively insensitive + stable RDX. |
Ye old PATR-2700 Volume 9, 1980 devotes 45 pages (R120-146).
(Free DL.)
Sez - R 140. Modern analytically methods for RDX tend to stress
instrumental techniques.....
See also Volume 3 C 611-621.
Current Military Specifications for RDX
http://www.everyspec.com/MIL-SPECS/MIL+SPECS+(MIL-DTL)/MIL-DTL-398D_11163/
djh
---
Margaret Miner & Hugh Rawson Eds.
The New International Dictionary of Quotations.
2nd ed. Dutton Books 1993
SCIENCE
If I have seen further…. it is by standing on the
shoulders of giants. Isaac Newton,
letter to Robert Hooke, Feb. 5, 1675/6
[Robert K Merton has written a little book on
this quotation, in which, among other things,
he demonstrates that it was a commonplace
of the period. He traces it back to
Bernard of Chartres; see under VISION.]
VISION
We are like dwarves upon the shoulders of
giants, and so able to see more and further
than the ancients.
Bernard of Charteres,
quoted in John Salisbury, Metalogicon.
[For Newton's version see SCIENCE.
Robert K. Merton, in his entertaining
book on this aphorism offered many
examples of variations. A late one
if from Coleridge: "The dwarf
sees further than the giant, when he
has the giant's shoulder to mount on"
(The Friend).]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
