Pages:
1
2
3
4
5
6 |
Quantum_Dom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 88
Registered: 23-6-2008
Member Is Offline
Mood: Entangled
|
|
Quote: Originally posted by Francis Crick ![](images/xpblue/lastpost.gif) | Sorry about the naming issue QD, brain must have been skim reading your name for a while your work is very much admired from these parts
Yes, the aqueous was reduced then aqueous base added to it as it was thought a LOT less base would be needed than was required.
If there is indeed still PPA present in the aqueous, would one expect to see the freebase rise to sit on top as the volume reduces? Or would it be
better to acidify with HCl, reduce volume then basify again to get at the freebase?
And is the freebase actually brown or that just a result of byproducts present in the sample prior to the crystallization? |
I am still confused as you didnt really answered what I was asking for. I know you reduced the volume (by only 1/5 th of the inital volume). What I am
telling you is that:
1. You did not reduce sufficiently the acidic extract volume.
2. Not only you did not reduce the acidic extract enough, you returned to square one by flooding the system with almost 1 L of aqueous base. I
mentionned on many occasions, that the freebase of PPA has affinity with water. Too large a volume of water, smaller the yield of extraction with a
non-polar solvent.
Please have another look at the write-up in my original post as everything is explained there.
QD
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Would there be any harm from heating this reaction for too long? If not, it would seem that if there's both unreacted alanine and unreacted
benzaldehyde, letting it react a bit longer, or adding the alanine in portions, might be helpful. If heating too long is harmful though, then those
would be bad ideas.
|
|
Francis Crick
Harmless
Posts: 3
Registered: 10-9-2010
Member Is Offline
Mood: No Mood
|
|
Understood QD, but if the reaction could be done again from scratch it would. I should have made it more clear as I was asking what would be the best
approach to take after this most unfortunate of errors.
Either:
1. acidfy the now 1.8 L basic solution, reduce the volume by heating then re-basify to extract with DCM
or
2. reduce the volume of the 1.8L basic solution by heating then extract with DCM
Due to concerns with excess NaCl with all the HCl and NaOH additions, the decision was made to take option 2 and just reduce the solution.
Upon reducing the volume to 600 mL, an obvious orange color has been developing in the aqueous solution so its looking promising. clear solid 'salt
like' matter has also been forming in the bottom of the beaker so it may help to filter these prior to DCM extraction. It is planned to continue to
reduce the volume to 200mL, vacuum filter the solids out warm, extract with 5 x 200 mL DCM and continue as per the original QD method.
One further question, is removing the DPEA from the aqeuous as sensitive to its concerntration as the PPA? I notice that 3 x 150 mL DCM extactions
preceed the reduction in aqeuous volume whilst 3 x 75 mL DCM follow it. Any particular reason for this?
Suggestions are more than welcome. Will post yields soon.
|
|
Quantum_Dom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 88
Registered: 23-6-2008
Member Is Offline
Mood: Entangled
|
|
Quote: Originally posted by Francis Crick ![](images/xpblue/lastpost.gif) | Understood QD, but if the reaction could be done again from scratch it would. I should have made it more clear as I was asking what would be the best
approach to take after this most unfortunate of errors.
Either:
1. acidfy the now 1.8 L basic solution, reduce the volume by heating then re-basify to extract with DCM
or
2. reduce the volume of the 1.8L basic solution by heating then extract with DCM
Due to concerns with excess NaCl with all the HCl and NaOH additions, the decision was made to take option 2 and just reduce the solution.
Upon reducing the volume to 600 mL, an obvious orange color has been developing in the aqueous solution so its looking promising. clear solid 'salt
like' matter has also been forming in the bottom of the beaker so it may help to filter these prior to DCM extraction. It is planned to continue to
reduce the volume to 200mL, vacuum filter the solids out warm, extract with 5 x 200 mL DCM and continue as per the original QD method.
One further question, is removing the DPEA from the aqeuous as sensitive to its concerntration as the PPA? I notice that 3 x 150 mL DCM extactions
preceed the reduction in aqeuous volume whilst 3 x 75 mL DCM follow it. Any particular reason for this?
Suggestions are more than welcome. Will post yields soon. |
IMO I would avoid evaporating the water without reacidifying the whole as PPA will steam distill. To what extent, I dont know.
I do not understand the second part.
QD
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Quick question... is most of the DPEA left in the nonpolar layer? Also, is the reddish-brown product DPEA? I'm guessing the reason for evaporating
most of the solvents and then basing the aqueous layer is to saturate it with salt so less of the PPA base can dissolve in it.
|
|
Nicodem
|
Thread Split 17-4-2011 at 06:27 |
Nicodem
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
A notice to those few members who brought this otherwise nice thread down to the level of kewls:
All your posts from the recent revival of the thread were split and moved elsewhere where they fit better.
Stop posting junk replies into this thread! If you have something off-topic to discuss on such a kewlish level, at least have the decency to do so in
a separate thread in the Beginnings section. Only post here when you have something to add on topic and on the same level of discourse.
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
There are other ways to work this reaction up. For example, I evaporated away all the liquid, leaving me with PPA HCl and some other junk, then
rinsed the other junk away with acetone.
Obviously I'm a student of the "Good Enough" school of philosophy. ![:P](./images/smilies/tongue.gif)
The more steps I have to take, the more likely I am to screw up something, so this may not be a bad way to go.
[Edited on 4/17/11 by Melgar]
|
|
jon
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 459
Registered: 11-1-2006
Member Is Offline
Mood: paranoid distrustful apprehensive
|
|
yeah it is a bad way to go about it.
what happens with these kind of amino alcohols is they are volitile with steam
even thier hydrochlorides.
did you take a m.p. afterwards?
and diphenylethanolamine i can't tell you exactly the solubility data i have looked for it in chem abs.
other than to say the scientists at sigma aldrich said it dissolves .6 g/100 ml in ethanol under sonication.
so likely you can easily remove it by simply salting out the aqueous phase at ph 12 and saturating with isopropanol.
also wanted to add that you can suppress the steam volatility of these type of compounds by acidifying it to ph3 or less
that keeps water tied up as the hydronium ion so it does'nt tie up with your substrate.
[Edited on 18-4-2011 by jon]
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Well there's an excess of HCl already in the solution; as it gets down to the last little bit, the HCl fumes are quite intense. Did not take a
melting point, but I did do a few DCM washes like the OP did, so there shouldn't be too much diphenylethanolamine. With such an excess of
benzaldehyde, I don't think there's going to be much alanine left, and most of the rest of the products would evaporate away.
|
|
crystalXclear
Harmless
Posts: 28
Registered: 30-12-2010
Member Is Offline
Mood: No Mood
|
|
I must agree with the tasting of any known/unknown rxn soultion, as being one of the crazyist things to do, to say the least.
BUT, And I hope this will not only prevent it being repeated, but posibly help identify the substance, or it's main constituant at least.
After reading a post on a body building site, beta alanine/l-alanine, was said to be VERRY SOUR tasting & had to be sweetened with OJ before being
used as a pre workout suppliment drink.
apollogies if this is of little or no usefull info, I just thaught it worth mentioning. Xtal
|
|
jon
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 459
Registered: 11-1-2006
Member Is Offline
Mood: paranoid distrustful apprehensive
|
|
this is standard extraction protocol for ppa.
i found this in a book at the pharmacy library so i would stick with convention it always works for me.
|
|
azo
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 163
Registered: 12-2-2008
Member Is Offline
Mood: No Mood
|
|
just a thought on the akabori reaction ! I no there is much speculation on the steriochemistry of ppa ,but could someone correct me if i am wrong. but
i think that you will get dextro and levro forms of both norephedrine and norpsuedoephedrine is this correct . sorry if im wrong
regards azo
|
|
questions
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 103
Registered: 12-2-2011
Location: Australia
Member Is Offline
Mood: curious
|
|
I can make benzaldehyde from cinnamon bark oil but the product I always end up with has still got some cinnamon oil in it.
It is about 80% benzaldehyde and 20% cinnaomon oil.
I'm thinking of just mixing and reacting this solution with the N-methylalanine to make the pseudoephedrine
Do you think the cinnamic aldehyde will react with the n-methylalanine and or even stuff up the reaction some how?
|
|
jon
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 459
Registered: 11-1-2006
Member Is Offline
Mood: paranoid distrustful apprehensive
|
|
yes i think it would it has the same functional group so it would tie up your alanine i would carefully fractionate it.
or remove it chemically by means of oxidation with acidic potassium permanganate.
you could test for it's presence by adding bromine for a double bond test.
AZO you would get erythro/threo isomers of course.
there are two stereocenters i don't see this reaction being selective chirally.
[Edited on 26-6-2011 by jon]
|
|
questions
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 103
Registered: 12-2-2011
Location: Australia
Member Is Offline
Mood: curious
|
|
How would I separate the cinnamon aldehyde from the benzaldehyde by the method you mentioned using acidic potassium permanganate?
|
|
weldit
Harmless
Posts: 16
Registered: 29-12-2009
Member Is Offline
Mood: No Mood
|
|
The best way to seperate them is by distillation
Benzaldehyde 178
Cinnamaldehyde 248
|
|
fanglongcan
Harmless
Posts: 3
Registered: 18-9-2011
Member Is Offline
Mood: No Mood
|
|
I would like to ask
After alkalization ,Is the extraction of water phase?or Oily extract?
|
|
overload
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 66
Registered: 9-7-2011
Location: USA
Member Is Offline
Mood: miserable fat slave
|
|
So has anyone written up an example they would like to share? Since this thread is about improving efficiency I think an efficient example or method
should be provided that explains what is actually going on. For example.
"150 ml of DMSO is added to extract impurities such as *insert impurities here* and then the dmso is separated and set aside for recycling."
|
|
overload
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 66
Registered: 9-7-2011
Location: USA
Member Is Offline
Mood: miserable fat slave
|
|
Quote: Originally posted by Melgar ![](images/xpblue/lastpost.gif) | There are other ways to work this reaction up. For example, I evaporated away all the liquid, leaving me with PPA HCl and some other junk, then
rinsed the other junk away with acetone.
Obviously I'm a student of the "Good Enough" school of philosophy. ![:P](./images/smilies/tongue.gif)
The more steps I have to take, the more likely I am to screw up something, so this may not be a bad way to go.
[Edited on 4/17/11 by Melgar] |
Could youexplain what you did in a little more detail so that we can better understand what your talking about?
Quote: Originally posted by jon ![](images/xpblue/lastpost.gif) | yeah it is a bad way to go about it.
what happens with these kind of amino alcohols is they are volitile with steam
even thier hydrochlorides.
did you take a m.p. afterwards?
and diphenylethanolamine i can't tell you exactly the solubility data i have looked for it in chem abs.
other than to say the scientists at sigma aldrich said it dissolves .6 g/100 ml in ethanol under sonication.
so likely you can easily remove it by simply salting out the aqueous phase at ph 12 and saturating with isopropanol.
also wanted to add that you can suppress the steam volatility of these type of compounds by acidifying it to ph3 or less
that keeps water tied up as the hydronium ion so it does'nt tie up with your substrate.
[Edited on 18-4-2011 by jon] |
[Edited on 2-10-2011 by overload]
|
|
fanglongcan
Harmless
Posts: 3
Registered: 18-9-2011
Member Is Offline
Mood: No Mood
|
|
The aqueous phase was then treated with small portions of NaHCO3 [11] until fizzing becomes less violent (Figure-6), then small portions of NaOH were
added until pH was strongly alkaline. A light brown-yellow oily layer with a strong and biting amine smell separated from the aqueous phase .
I tried to do so,But when it alkalinization after ,In oil layer unknown things have contact .Who can tell me how to clear these things
|
|
cipi
Harmless
Posts: 14
Registered: 15-10-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Quantum_Dom ![](images/xpblue/lastpost.gif) | Quote: Originally posted by hector2000 ![](images/xpblue/lastpost.gif) |
i know chemistry of drug and i know tasting small amount of ppa is not dangerous also i know PPA has bitter taste but my PPA(by akabori reaction) is
sour. |
No, tasting (regardless of the quantity involved) a product you do not know the nature or idendity makes you a cook, not a chemist.
|
If resisting to taste the chemical you just produced without knowing what it is makes you a chemist then even monkeys can be chemists. Simply put a
monkey infront of a beaker filled with sulfuric acid and a beaker filled with ethanol get him to pour one into the other and then have him run away.
Monkey chemist.
[Edited on 23-12-2011 by cipi]
|
|
cipi
Harmless
Posts: 14
Registered: 15-10-2011
Member Is Offline
Mood: No Mood
|
|
To expand the possibilities of the akabori different benzaldehydes such as 4-fluorobenzaldehyde or clorobenzaldehyde might be used in place of regular
benzaldehyde. "Substituted" benzaldehydes being used in akabori have been discussed before but no results have been posted -so?-
|
|
woelen
|
Thread Pruned 22-2-2012 at 23:16 |
Waffles SS
Fighter
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 7-12-2009
Member Is Offline
|
|
Yield may increase if we Use certain solvents(like DMSO)?
Yuusaku Yokoyama(2007) used DMSO and got 79% yield
Attachment: Yuusaku Yokoyama.pdf (117kB) This file has been downloaded 1097 times
|
|
jon
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 459
Registered: 11-1-2006
Member Is Offline
Mood: paranoid distrustful apprehensive
|
|
i had a hunch about that solvent years ago i fucking knew it.
of course they are using methyl alanine so the yeilds will be higher naturally.
but still it's a rung up.
now we need to optimize solvent ratios i don't understand japanesse.
[Edited on 16-9-2012 by jon]
Give me librium or give me meth!
Patrick Henry....
|
|
Hilski
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 197
Registered: 13-9-2006
Member Is Offline
Mood: No Mood
|
|
Holy shit!
This would lead one to believe that yields in the range of 60%-70% are possible, given the right conditions. But seeing as how I'm an uncultured
ass, and can't read Japanese (or any other non-English language) I'm not 100% sure I saw what I think I saw. I think.
\"They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety. \"
- Benjamin Franklin
|
|
Pages:
1
2
3
4
5
6 |