Pages:
1
2 |
chen
Harmless
Posts: 7
Registered: 7-12-2010
Member Is Offline
Mood: No Mood
|
|
can a computer power supply kill you?
I am going to make a electrolysis machine with a computer power supply and want to know if I will die if I touch the (stripped) wires accidentally. I
believe most people die at .5A so I'm leaning towards yes.
The input rating is 100-120V and 3A
OR
200-240V and 1.5A
The outputs for various wires are:
RED +5V 10A
YELLOW +12V 2A
BLUE -12V .3A
ORANGE +3.3V 6A
PURPLE +5VSB 0.8A
BLACK GROUND
GRAY POWER GOOD
I'm wondering what "gray= power good" means.
Maximum continuous output power is 100W.
[Edited on 24-12-2010 by chen]
|
|
bfesser
Resident Wikipedian
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Why touch the wires?
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
If you get a good connect, such as a firm grip on a bare wire or even a moderate grip on wet wires, 12 V can kill you. The path is important, right
hand to left foot is likely to be bad for instance, as the flow goes through the chest region.
|
|
DDTea
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 940
Registered: 25-2-2003
Location: Freedomland
Member Is Offline
Mood: Degenerate
|
|
When you fight the power, the power will fight back.
"In the end the proud scientist or philosopher who cannot be bothered to make his thought accessible has no choice but to retire to the heights in
which dwell the Great Misunderstood and the Great Ignored, there to rail in Olympic superiority at the folly of mankind." - Reginald Kapp.
|
|
entropy51
Gone, but not forgotten
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Quote: Originally posted by chen ![](images/xpblue/lastpost.gif) | I am going to make a electrolysis machine with a computer power supply and want to know if I will die if I touch the (stripped) wires accidentally. I
believe most people die at .5A so I'm leaning towards yes.
| The power supply can deliver 0.5 amps through an appropriate resistance, but it won't if
you touch the wires because the resistance of the body (through the skin of the hands) is too large to permit that much current.
Look up Ohm's Law and the resistance of the human body and calculate the current that will flow.
|
|
bbartlog
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
People have died from 12V, but I think it really takes some doing (dip both hands in electrolyte gel and then seize the leads firmly, or something).
Even then, the mechanism is disruption of the heart's electrical rhythm rather than gross physical damage such as burns or hyperthermia.
I've done manual repairs on a 16V power supply while the wires were live, and with dry skin you can barely feel it when you complete the circuit with
your body. A bigger hazard IMO when working with low-voltage high-current power supplies is that a short through something with a really low
resistance will cause a spark or explosion that might burn you.
|
|
smuv
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
Don't worry about it. I use 12v power supplies all the time, and have never felt so much as a shock from one (except on my tongue...next time I will
use a voltmeter). But then again, the voltage to feel a shock is highly dependent upon the area of the body and also how conductive it is. As long
as you are handling 12v with dry hands, you will never feel a shock.
|
|
franklyn
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
" 12 volts can kill you " seriously ?
A medical citation for this assertion is warranted I think.
I have spliced and twisted bare telephone hookup wire while live,
at 50 volts DC one can just start to feel a tingling in the fingers ,
others who do this can't discern any sensation.
Granted that if you are hogtied so you cannot disconnect yourself
and for the purpose of torture are subjected to a current across
the chest , cardiac arrhythmia might be induced. A high applied current
at low voltage can burn nerves but requires a large contact area
for needed conduction as well as a prolonged more than transitory
exposure. Car batteries will put out 90 plus amperes and are for
this reason connected observing basic electrical ground safety.
Sensibly if there is doubt about what can pose a risk heed that
instinct. Electricity beyond the power of a few flashlight batteries
if you don't know much about what you 're doing , is not something
one can be safely careless with.
.
|
|
crazedguy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 143
Registered: 12-11-2010
Member Is Offline
Mood: You can't fix stupid
|
|
I have been shocked on many occasions by welders and im still alive they were set at very high amps 100+ and 20ish volts, didn't kill me.
|
|
chen
Harmless
Posts: 7
Registered: 7-12-2010
Member Is Offline
Mood: No Mood
|
|
Yeah, I know ohm's law by heart, I just don't know how actual electronics work. Good to know to look at the voltage and not the current.
I looked up a story online about a naval officer who killed himself with 9V by puncturing his skin with both leads. I'm not going to do this.
|
|
Sedit
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1939
Registered: 23-11-2008
Member Is Offline
Mood: Manic Expressive
|
|
Almost every single post in this thread has totally missed the point and everyone is talking about volts this and volts that, I use to daily touch
well over 100k volts and not even get a little tingle this is because of a couple factors, mainly the fact that there was almost zero current comming
from the air cored transformer. Its the amps that kill not the voltage.
Knowledge is useless to useless people...
"I see a lot of patterns in our behavior as a nation that parallel a lot of other historical processes. The fall of Rome, the fall of Germany — the
fall of the ruling country, the people who think they can do whatever they want without anybody else's consent. I've seen this story
before."~Maynard James Keenan
|
|
bbartlog
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
Quote: | Almost every single post in this thread has totally missed the point and everyone is talking about volts this and volts that |
On the contrary. You can't deliver amps without volts, so in the context of this discussion (a reasonably high current power source) it makes perfect
sense to talk voltage. Of course, if the source is severely current limited, then high voltage is not a problem. Static electricity runs into five
figure voltages and doesn't kill people.
|
|
hissingnoise
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Daft analogy, but voltage is the motor and amperage the weight of the vehicle - I've had accidental bangs off electric fences, mains power (standing
on wood) and an NST!
10kV *will* make one roar, but so will a fence . . .
People's resistance varies, I think, and what might kill in one instance, in another the recipient might just be jellied for a day.
If in *any* doubt, don't touch it!
|
|
entropy51
Gone, but not forgotten
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Quote: Originally posted by chen ![](images/xpblue/lastpost.gif) | I looked up a story online about a naval officer who killed himself with 9V by puncturing his skin with both leads. I'm not going to do this.
| Sorry fellas, but neither of these scenarios is even remotely possible.
Chen, measure the resistance of your body by gripping the two leads of an ohm meter (or google for it) and then use Ohm's law to calculate the current
resulting from 12 volts. Then google for the lethal current and compare the two. Learn how to answer these questions for yourself.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I routinely take 12 volts, 24 volts and 5 volts with my bare hands, from computer supplies and all kinds of other supplies. These low voltaes cannot
kill. You may get some funny tingling feeling when your hands are wet and salty with 24 volts, but that's all. So, no need to worry shock or
electrocution.
|
|
Contrabasso
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 277
Registered: 2-4-2008
Member Is Offline
Mood: No Mood
|
|
With wet hands then you will feel serious tingling with 12v, if you apply 12v to the wrong places (near the heart especially) you could get bad
effects. With normally dry skin you should have no ill effects from the voltage. HOWEVER inside a computer psu there is clearly a mains input so
presence of certainly dangerous voltages. If the PSU can deliver serious current then heating could be a problem with the associated burns.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Of course, INSIDE a power supply there are parts which carry 230 V AC or 110 V AC and these ARE dangerous. But as long as the case is not opened and
you do not spill liquids or metal objects inside the power supply through the ventilation openings, then I see no real risk. No one would put the two
electrodes with 12 V just near his heart while the body is wet or sweaty.
|
|
IrC
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
I agree with Woelen. Unless you plan on stabbing your heart with electrodes that is. 1 Ma you can just feel. 100 Ma across your heart will stop it.
150 Ma across your heart will more often than not stop it so hard they cannot bring you back. DC burns more than AC yet AC makes it harder to let go.
Volts push amps. Volts = acceleration potential for each electron and amps = number of electrons. Virtually all electrocution deaths are from AC but
we are most often exposed to AC whenever we encounter dangerous voltages. Anyone surviving a bolt of lightning will attest DC is a killer as well.
Around 80 volts you can not let go from the current flow between two hands across your heart with dry skin. Been there, done that. This could be as
low as 24 volts when current potential exists and you are wet. I was locked up unable to let go and my co worker stood there looking at me with the
most stupid expression watching me fry. Knowing the trouble I was in I willed myself to violently thrust myself away from the machine. Had it been up
to the moron I worked with I would not be writing this. I have been hit by many voltages and currents many times and the 80 volts was actually the
closest I came to being done for. It would not let me let go. If you work in the industry then you know 480 VAC is the most dangerous voltage in the
panels as it loves to cause explosions. A guy I know after years of grafts from a 480 VAC panel exploding still looks more reptilian than human. When
an arc occurs at 480 volts the plastic insulation turns into a ball of rapidly expanding plasma in a runaway reaction. The greater heating effect of
DC makes this worse as anyone working in a submarine can tell you.
Bottom line is unless you open the supply you are fairly safe but survival dictates you always treat things safely and never fail to consider a
possible heart path for current flow whenever you work with electricity. Your computer power supply is not isolated from the mains meaning a fault
internally can possibly be hazardous with a potential existing between your output leads and earth ground. If you put your body in this path who
knows. Do not stand in water holding one of the electrodes even if it is 5 volts referenced to the power output common. The chance of a common mode
voltage between the power supply negative or positive leads and earth ground does exist. Isolation consists of the windings in the ferrite
transformers in the supply, and these windings can short together under the right circumstances.
In short treat all power with respect no matter how benign you think it is. Do this always until it is second nature. Meaning until you do it without
thinking about it. You never know when these habits will someday actually save you when things do go wrong.
"When you fight the power, the power will fight back."
Resistance is Futile
[Edited on 12-25-2010 by IrC]
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
Ephoton
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
Just don't give it a gun.
e3500 console login: root
bash-2.05#
|
|
mnick12
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 404
Registered: 30-12-2009
Location: In the lab w/ Dr. Evil
Member Is Offline
Mood: devious
|
|
Current varies inversely with resistance, so as the resistance goes down then the current goes up. One example of this that I discovered accidentaly
is my aquarium pump, I use it to circulate water through my condensors. I noticed that when barefooted or with socks on the concrete that when I
touched the water in the pump resevoir nothing happens, but on a rainy day or when the concrete is wet if you touch the water you end up getting quite
a jolt.
So as long as you are careful you should have no trouble at all.
|
|
Ephoton
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
V=I/R not to hard realy
e3500 console login: root
bash-2.05#
|
|
IrC
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
Are you sure it is easy if you post E=I/R instead of E=I*R? I prefer E instead of V for volts.
![Ohmslaw.jpg - 37kB](http://www.sciencemadness.org/talk/files.php?pid=196402&aid=12476)
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
ScienceSquirrel
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
I have never had a shock or a tingle from a 12V supply eg car batteries and they pack quite a punch being capable of delivering tens of amps.
I know quite a few people who have survived a 240V AC shock.
The capacitors inside a computer power supply are quite nasty and can give you quite a poke even when it is not plugged in if they have not fully
discharged and you touch their terminals.
Similar shocks but a lot less unpleasant can be had from Coleman lamp igniters and electronic flashes.
Old fashioned cathode ray tube displays carry a big voltage and can hold it for a long time after switch off.
Naive poking can result in a Darwin Award, for you not the tube!
|
|
franklyn
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
Assuring that all powered devices maintain the same polarity to ground
eliminates the principal risk of being shocked. One conductor of the house
service power line is isolated , the other is connected to ground typically
to the water pipes and even gas lines , which provide parallel conductive
paths the same as the grounded conductor. By bridging a point of contact
to the isolated side of a powered device with ground , even a damp concrete
floor , creates a ground fault. In other words your nose lights up just like
Rudolph the reindeer.
High voltage utility lines in some areas have just one conductor and use
ground instead of the second conductor. The transformer provides isolation
in this case. See further explaination below. #
http://en.wikipedia.org/wiki/Single-wire_earth_return
Equipment will in almost all cases further isolate the electrical parts at
ground from the units enclosure. Devices which have a chassis ground to
the metal case of the unit pose a risk if powered with the case connected
to the isolated power line conductor. An electrocution hazard then exists
for touching that case and anything else that is grounded.
# An added layer of safety is provided by an isolation transformer because
it has only inductive coupling with the service power line and the supply side
has no physical connection to the isolated conductor of the service
power line.
A risk that can occur is if more than one device powered from the supply side
of the isolation transformer sharing common ground one has reversed polarity
as described before. Touching both in such event you will receive a shock.
Explained in some detail here , See Figure 83-2
http://web.squ.edu.om/med-Lib/MED_CD/E_CDs/anesthesia/site/c...
The images should enlarge by clicking on each , but if they don't as for me
they are attached below. *NOTE the circuit as shown gives the
impression that a ground fault occurs within the isolation transformer unit
itself. A FAULT CAN OCCUR ANYWHERE in the circuit , the connecting power
cords and the connected equipment.
![Ground fault.gif - 19kB](http://www.sciencemadness.org/talk/files.php?pid=196411&aid=12480)
[Edited on 26-12-2010 by franklyn]
|
|
Ephoton
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
ye typo V=I*R
no more iphone for me.
e3500 console login: root
bash-2.05#
|
|
Pages:
1
2 |