If_6_was_9
Unregistered
Posts: N/A
Registered: N/A
Member Is Offline
|
|
Copper Retort
I polished up what seems to have been an old autoclave or bomb and converted it into a metal retort. Here's before and after pics (before and
after polishing). I replaced the lead gasket with a rubber one. Some of the bolts broke when taking them out so I used the one's I had left in
the second picture.
![](http://www.sciencemadness.org/scipics/MetalRetort.jpg)
![](http://www.sciencemadness.org/scipics/CopperRetort2.jpg)
[Edited on 29-3-2004 by If_6_was_9]
[Edited on 29-3-2004 by If_6_was_9]
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
pressure rating?
That is a most interesting piece of equipment. You say it is a bomb or autoclave. Does it have a pressure rating or any other information stamped on
it? Ususally pressure vessels have such stampings.
|
|
If_6_was_9
Unregistered
Posts: N/A
Registered: N/A
Member Is Offline
|
|
There's nothing written on it. I put the tubing on it (right side of the picture). There was a fitting there before. It looks like it was hand
made out of several layers of sheet copper (or alloy?) welded together. It was in the 'old medical' section on Ebay. The lead gasket looks
like it could be a problem at high temperatures so I replaced it with a rubber gasket.
[Edited on 29-3-2004 by If_6_was_9]
|
|
axehandle
Free Radical
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1065
Registered: 30-12-2003
Location: Sweden
Member Is Offline
Mood: horny
|
|
Very interesting. I wonder why someone would construct a high pressure container out of copper, of all things. Copper has an abysmal tensile
strength.
Perhaps because of its (as compared to mild steel) inertness, and because of its excellent heat transfer properties?
Have you got any idea how old it is?
[Edited on 2004-3-30 by axehandle]
My PGP key, Fingerprint 5D96 E09E 365D 1867 2DF5 C2FE 4269 9C19 E079 CD35
\"Verbing nouns weirds the language!\"
|
|
chemoleo
Biochemicus Energeticus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
Hmm.
Well, how about the whisky etc brewing people? I think they all use copper retorts, albeit much much bigger. maybe this was some DIY version.
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
axehandle
Free Radical
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1065
Registered: 30-12-2003
Location: Sweden
Member Is Offline
Mood: horny
|
|
That's a reasonable assumption, but it doesn't explain all those bolts. The pressure in a whisky still is basically the same as outside it.
This copper..... *thing*.... baffles me......
My PGP key, Fingerprint 5D96 E09E 365D 1867 2DF5 C2FE 4269 9C19 E079 CD35
\"Verbing nouns weirds the language!\"
|
|
chemoleo
Biochemicus Energeticus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
how about distilling lovely things such as phosphorous? Mercury?
It could be used for a LOT of things.
nonetheless, i guess u have a point. This thing is meant to hold pressure. The copper thickness looks to be around 5 mm. Very thick. On the other
hand, the engineer/machinist might have thought, better safe then sorry. If_6-was_9, did you see any device/valve that'd suggest that a high
pressure is maintained during the reaction?
Also, it looks fairly professional, I have a feeling it was a proper piece of equipment in a lab at some point. Lead... also very inert. Can't be
a coincidence!
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
BromicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
I think that distilling phosphorus in copper would be bad. I hear that it easily forms the phosphide. I know it's a terrible problem in iron
but I think copper might even be worse. Be carefull of the clean up though, lots of fun phosphine.
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
gasket material
A lead gasket - now that is interesting. I would have thought it would have been made of asbestos for high temperature and inert use.
You are using rubber. If you find that this will not hold up under high temperature use consider using a gasket made by Flexitalic. These are spiral
wound carbon/metal. There are several metals to choose from. The bolt torque spec for sealing will be higher than for rubber, however. For rubber
Viton is hard to beat for all around high temperature, chemical inertness, and economy.
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
To me this looks like a part of an ancient steam-engine and the lead gasket speaks for this too.
In these old days copper was widely used as steel was hard to work with and cast iron was inherently dangerous for the risk of explosion producing
lots of shrapnels.
I also remember that I have seen such pots on old machines - I will try to dig up a picture somewhere.....
It´s a nice part anyways, like it.
|
|
Eliteforum
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 571
Registered: 18-11-2002
Location: United Kingdom
Member Is Offline
Mood: Enjoying the journey
|
|
How much did it cost? Seeming as though you got it off ebay 'n all.
All that glitters isn't gold.
|
|
If_6_was_9
Unregistered
Posts: N/A
Registered: N/A
Member Is Offline
|
|
It didn't cost much, but I can't remember the exact price I paid for it. I think I was the only one to bid for it, from what I can
remember. I've got some xerox copies from old catalogs which show metal retorts. I could scan them and post the pictures if anyone's
interested.
[Edited on 31-3-2004 by If_6_was_9]
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
steam trap?
I think Organikum may be on to something. This item does have the general shape and size of a steam trap, which is a necessary part of any machine
that has condensate reuse.
|
|
If_6_was_9
Unregistered
Posts: N/A
Registered: N/A
Member Is Offline
|
|
I wonder why it was under "old medical" on Ebay. I thought it might have something to do with sterilizing tools or something like that.
|
|
Eliteforum
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 571
Registered: 18-11-2002
Location: United Kingdom
Member Is Offline
Mood: Enjoying the journey
|
|
The person selling it may not have known what it was/is used for.
All that glitters isn't gold.
|
|