Pages:
1
2 |
Vogelzang
Banned
Posts: 662
Registered: 26-4-2008
Member Is Offline
Mood: No Mood
|
|
Pd/C
These two patents give methods for producing Pd on charcoal.
US 4421676 Process for preparation of palladium on carbon catalysts used in the purification of crude terephthalic acid
US 6066589 Hydrogenation catalysts
Coconut charcoal is prefered for some reason.
I found something that says coal based C is superior to coconut charcoal at least for use in aquariums. Any thoughts about making Pd/C using aquarium
or water/air activated charcoal filtering media? Googling palladium and charcoal turns up a lot of articles and books about Pd/C hydrogenation
catalysts. Coconut charcoal is sold on Ebay.
Quote: |
Heat-activated bituminous coal-based Black Diamond granules are specially sized and far more efficient than inferior coconut, wood or peat-based
carbons. Premium Black Diamond works as much as twice as fast as the competition.
|
http://www.marineland.com/sites/Marineland/products/productd...
Aquarium Pharmaceuticals also sell a something they call super activated carbon which is coal based.
[Edited on 7-9-2009 by Vogelzang]
|
|
Sedit
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1939
Registered: 23-11-2008
Member Is Offline
Mood: Manic Expressive
|
|
Quote: | Coconut charcoal is prefered for some reason. |
Coconut charcoal is known to produce some of the finest activated charcoal around with a super large surface area.
Knowledge is useless to useless people...
"I see a lot of patterns in our behavior as a nation that parallel a lot of other historical processes. The fall of Rome, the fall of Germany — the
fall of the ruling country, the people who think they can do whatever they want without anybody else's consent. I've seen this story
before."~Maynard James Keenan
|
|
Formula409
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 129
Registered: 13-12-2008
Member Is Offline
Mood: No Mood
|
|
Whilst not exactly what you're looking for, these definitely could be of interest! Especially if you are trialling methods and don't want to break the
bank.
http://www.erowid.org/archive/rhodium/pdf/nickel-on-charcoal...
http://www.erowid.org/archive/rhodium/pdf/nickel-on-charcoal...
Formula409.
[Edited on 7-9-2009 by Formula409]
|
|
starman
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 318
Registered: 5-7-2008
Location: Western Australia
Member Is Offline
Mood: No Mood
|
|
Vogelzang- is there information on the mesh sizes of these aquarium type products?
F409- interesting read. I particularly like the use of nitrate salts, evaporation and the older method of simply heating to drive off NOx and
H2O.Probably also applicable to Pd.
Pd metal,charcol, nitric acid and a heat source.Much more home friendly than the methods I've encountered for Pd/C.
Chemistry- The journey from the end of physics to the beginning of life.(starman)
|
|
Vogelzang
Banned
Posts: 662
Registered: 26-4-2008
Member Is Offline
Mood: No Mood
|
|
The mesh size varies from 4-5 mesh to smaller mesh. I found an interesting article today (attached).
Attachment: RusChemRev1992-p168-174-Pd-C.pdf (816kB) This file has been downloaded 2572 times
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
There are numerous ways to make an active Pd/C. PdCl2 can be dissolved in a suitable organic solvent, or even chloropalladic acid can be used. Best
results with hot H2 as reductant, cooling under H2, and bottling that way.The most important consideration is the charcoal. I have found that
pellotised charcoals are good substrates if one is planning to reduce a lot of material and easily separate the catalyst for reuse.
If I had the spare time I would do a prepublication on Adams' and a suite of palladium catalysts.
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Damn! Can't wait for that! It would be a delightfull contribution! NERV told me a bit about your work with PtO2, very interesting! And all that from
scrap metal if I understood correctly?
Have you tried the H2 reduction method for Pd yourself? How active was the catalyst compared to commercial material?
Can't wait to hear some more!
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Hmmmmm. Do you suppose coal based charcoal might contain sulfur compounds?
|
|
crazyboy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 436
Registered: 31-1-2008
Member Is Offline
Mood: Marginally insane
|
|
What is coal based charcoal and why would it be preferable to any other charcoal?
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
Coal based charcoal is essentially coke.
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
There are often good reasons for using reagents of a specific origin. These materials work well for the job at hand..
Similar materials of a different origin, might not perform properly.
My query regarding possible residual Sulfur compounds, in coal based charcoal, had a purpose. Some catalysts are extremely sensitive to such
compounds. Your catalyst then, might be inadvertently "poisoned" by the trace elements in the coal-charcoal substrate. Thereby causing your
intended reduction, to completely fail.
Such screw ups are commonplace.
|
|
watson.fawkes
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by zed ![](images/xpblue/lastpost.gif) | My query regarding possible residual Sulfur compounds, in coal based charcoal, had a purpose. | According to a
table in Coke - A Treatise on the Manufacture of Coke and Other Prepared Fuels and the Saving of By-Products (1905), residual sulfur range between 0.6 %
and about 2 %, with outliers for high-sulfur coal.
|
|
Paddywhacker
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 478
Registered: 28-2-2009
Member Is Offline
Mood: No Mood
|
|
If you just want to buy Pd/C, then you might try Artcraft. I bought some 10% Pd on C from them about a year ago for US$6 per gram.
|
|
Waffles
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 196
Registered: 1-10-2006
Member Is Offline
Mood: No Mood
|
|
I have a bunch of excess Pd/C, Engelhard material in original container I believe, give a U2U if you're interested. I could also trade for Pd raw
material if you already have some.
\"…\'tis man\'s perdition to be safe, when for the truth he ought to die.\"
|
|
UnintentionalChaos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv3...
Have a lookee there. Pd is fairly cheap, about $10/g at spot value. One gram would be enough for 20g of 5% Pd/C after dissolving in a little aqua
regia.
The coal based activated charcoals have higher surface area than the organic matter based ones, IIRC, which is a definite advantage for water
purification. However, they almost surely have residual sulfur compounds in them, and platinum group metals are highly sensitive to sulfur
contamination.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
Vogelzang
Banned
Posts: 662
Registered: 26-4-2008
Member Is Offline
Mood: No Mood
|
|
I found an article about coconut charcoal.
http://www.fileden.com/files/2008/8/24/2063601/chemistry/JCE...
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
Hi i am looking to buy some Pd/C for a school project (rasberry ketone).
My source will be Acros but i have a few questions first. What difference does the % Pd make? I guess its just speed of hydrogenation but thats just a
guess. Also when it says 10g, is that 10g of the palladium and carbon together or just 10g of Palladium metal on carbon.
thanks
|
|
gsd
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 847
Registered: 18-8-2005
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Picric-A ![](images/xpblue/lastpost.gif) | Also when it says 10g, is that 10g of the palladium and carbon together or just 10g of Palladium metal on carbon.
thanks |
It is Pd and C together making 10 gm.
gsd
[Edited on 25-10-2009 by gsd]
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
awsome thanks,
|
|
Vogelzang
Banned
Posts: 662
Registered: 26-4-2008
Member Is Offline
Mood: No Mood
|
|
This experiment gives a method of producing a supported Pt catalyst using sodium borohydride. I can't remember what book it comes out of.
Attachment: Ch16-CatHyd.pdf (227kB) This file has been downloaded 1000 times
|
|
ANDLOS
Harmless
Posts: 30
Registered: 13-12-2009
Member Is Offline
Mood: No Mood
|
|
I want to ask how to handle pd/c after use is there any method for reuse after first time used in reduction to use it second time,
thanks alot
|
|
entropy51
Gone, but not forgotten
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
One answer from Googling.
|
|
ANDLOS
Harmless
Posts: 30
Registered: 13-12-2009
Member Is Offline
Mood: No Mood
|
|
but this answer from trade source need money I mean if there is simple procedure for recycling that I can carry out
|
|
entropy51
Gone, but not forgotten
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
I know, but when I worked in industry we never recycled hydrogenation catalysts. I once asked asked why not, because they were expensive. The Real
Chemists who ran the labs said it wasn't worth the trouble. Others here may know better, though.
|
|
Nicodem
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by ANDLOS ![](images/xpblue/lastpost.gif) | but this answer from trade source need money I mean if there is simple procedure for recycling that I can carry out |
You might find the answer if you UTFSE. As far as I remember, this topic was already discussed and the regeneration processes for Pd-C were posted and
I think it was pretty simple.
|
|
Pages:
1
2 |