itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
Antimony pentafluoride
I was looking at a sealed container of SBF5 and it contained very light free flowing dark grey/black course powder(a bit like charcoal) thinking this
was strange looking stuff,i looked it up and it should be a liquid.
The container's label read Antimony pentafluoride 25g
Toxic Corrosive
moisture sensitive
store under nitrogen
It also said something like 50w/t %graphite.
So my question is why does Wiki and others say it is a liquid when the container states 25g (i do realise some liquids are sold in grams) but why is
it a solid or is it a gas on graphite or has it oxidised because it wasn't under nitrogen.
please help as i'm really confused
|
|
JohnWW
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
It has to be stored away from H2O, and from anything else which could either hydrolyse it to oxo compounds and HF, or with which it could form a
complex anion, being a very powerful Lewis acid.
|
|
itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
do you think that the dark grey powder is antimony oxide then?
|
|
UnintentionalChaos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
Graphite is gray. *facepalm* It's probably adsorbed onto graphite to make handling much easier.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
That makes sense, so it should still be capable of releasing fluorine (don't worry i'm not going to try it)
|
|
ammonium isocyanate
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 124
Registered: 13-7-2009
Location: USA - Midwest
Member Is Offline
Mood: sick
|
|
I do believe that pure SbF5 is a liquid at stp, but it may be that it has been absorbed into the graphite... Although I doubt that even if such a
thing does happen graphite would be able to absorb its own weight in SbF5. I suppose it is possible that the liquid clings to the graphite particles.
As for the SbF5 having been oxidized, no. SbF5 doesn't get oxidized. Even by fluorine. In fact, SbF5 when combined with F2 is such a powerfully
oxidizing compound that it can oxidize oxygen to oxonium fluoroantimonate.
|
|
itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
I was thinking it may have absorbed h2o from the air (it's not under nitrogen) it is in a well sealed container but it looks to be a fairly old
sample.
Is their a chance the fluorine could have been released as HF and then the SB oxidised ?
just a wild theory really
|
|
DJF90
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
You mean if the SbF5 can be hydrolysed to form an "oxyhalide" species?; technically an oxidation despite what ammonium isocyanate says because you are
adding oxygen to the compound (this is one of the three definitions for oxidation, the other two being removal of hydrogen, and loss of an electron).
If the container appears well sealed then I expect not. If the container is glass then its age is a testament against hydrolysis - the HF formed would
have etched away at the glass. Chances are if moisture got in then it can continually get in, which results in continued HF production and thus
continued corrosion of the glass. Personally... I think its probably well stored.
|
|
JohnWW
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by ammonium isocyanate ![](images/xpblue/lastpost.gif) |
As for the SbF5 having been oxidized, no. SbF5 doesn't get oxidized. Even by fluorine. In fact, SbF5 when combined with F2 is such a powerfully
oxidizing compound that it can oxidize oxygen to oxonium fluoroantimonate. | I do not think it could do that
because, if it were stored under nitrogen, it would do the same thing to nitrogen. You may be confusing it with PtF6. However, just to be on the safe
side, storing it under anhydrous argon would be better.
P.S. In case you were thinking of the trifluorooxonium cation, [OF3]+, rather than the dioxygenyl cation, [O2]+ (obtained by reaction of O2 with
PtF6), it has been shown to be theoretically stable, but it has never been isolated, e.g. by heating O2 or OF2, F2, and SbF5 or PF5 or AsF5 or BF3,
together under great pressure, at least as recently as 1999. However, [NF4]+ has long since been so obtained as such a salt. Nor does [OF3]+ seem to
have been obtained (yet) by reaction of OF2 with [KrF][SbF6]; but similar reactions have been used successfully to obtain [ClF6]+ from ClF5, and also
AuF5. An attempt to obtain [XeF7]+ this way from XeF6 was unsuccessful. See:
http://www.ingentaconnect.com/content/els/00221139/1999/0000... (restricted)
http://en.wikipedia.org/wiki/Trifluorooxonium
http://handle.dtic.mil/100.2/ADA408649
http://cat.inist.fr/?aModele=afficheN&cpsidt=10285487
http://pubs.acs.org/doi/abs/10.1021/ic00182a016 (restricted)
http://www1.elsevier.com/cdweb/journals/00221139/articles/99... (restricted)
[Edited on 30-8-09 by JohnWW]
|
|
itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
According to Wiki sb203 is a white powder so i think we can safely assume that the dark grey powder is graphite,it doesn't feel like it weighs 25g
(but i can't/won't open it to get an accurate weight) although it is pretty much full (maybe the sbf5 has all been used and just the graphite remains)
it is actually in a plastic container the original from aldrich it has no obvious signs of corrosion, but it feels like it could be a little brittle.
I can get a bottle of nitrogen and make a temporary nitrogen atmosphere in an old fish tank or something remove a small amount under nitrogen then
place it in a fume cupboard and add a couple of ml of water to see if it reacts i suppose that would settle it once and for all!!!
|
|
Formatik
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
Just do a web search on graphite and antimony pentafluoride that'll tell you all about your intercalated SbF5.
|
|
itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
Thanks,i certainly didn't think of that!!! and not only does it answer my question it also shows my original guess (a gas on graphite) wasn't that far
out.
The only thing is surely being on graphite would affect it's use in organic chemistry.
But what do i know
|
|
entropy51
Gone, but not forgotten
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Not what 50 wt % graphite means, apparently.
Any chemistry that's not on Wiki?
Any chemistry of fluorine?
I could make a list, but I'll stop there.
|
|
itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
But i can make a solution,well sort ov
|
|
ammonium isocyanate
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 124
Registered: 13-7-2009
Location: USA - Midwest
Member Is Offline
Mood: sick
|
|
Quote: Originally posted by JohnWW ![](images/xpblue/lastpost.gif) | Quote: Originally posted by ammonium isocyanate ![](images/xpblue/lastpost.gif) |
As for the SbF5 having been oxidized, no. SbF5 doesn't get oxidized. Even by fluorine. In fact, SbF5 when combined with F2 is such a powerfully
oxidizing compound that it can oxidize oxygen to oxonium fluoroantimonate. | I do not think it could do that
because, if it were stored under nitrogen, it would do the same thing to nitrogen. You may be confusing it with PtF6. However, just to be on the safe
side, storing it under anhydrous argon would be better.
[Edited on 30-8-09 by JohnWW] |
I'm not saying SbF5 alone will oxidize oxygen. I'm saying that it promotes oxiditaion by F2 to such a degree that oxygen will be oxidized to
dioxygenyl in the presence of both F2 and SbF5.
Article
|
|
Formatik
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
Now that's oxidizing power. Btw, SbF5 in a dry air doesn't absorb oxygen, it just evaporates.
|
|
Rich_Insane
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 24-4-2009
Location: Portland, Oregon
Member Is Offline
Mood: alive
|
|
This is like how chloroform is often sold "stabilized" to prevent phosgene from coming out.
The graphite probably acts as something to keep the SbF5 in place.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Itchyfruit, given your lack of knowledge/experience -- which you very clearly demonstrate in your posts -- it is best to leave that container closed
for the next few months (maybe years) and first do some studies and try to get practice with other chemicals and experiments. Do not understand me
wrong, it is not bad to be inexperienced, I also have been and in some subjects I still am. But it is important that you know of your limitations and
right now I do not think that you can handle SbF5 in a safe way.
I do not write this in order to offend you, but I'm really concerned. SbF5 is NOT a toy and it could easily do great harm to your health, even 25
grams can do a lot of nasty things.
|
|
itchyfruit
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
Rich Insane: I think your right,i have some nitro methane(a very small amount) that has what looks like little cylindrical pellets in the
bottle,presumably for the same purpose.
Woelen: You have not offended me in the slightest. Despite being a very new member here i can see that you and the likes of DJF90,Pulverone,Kmno4,etc
(even Entropy51 despite his constant piss taking)clearly know what your talking about and your concern is appreciated.
But to put your mind at rest i'd like to let you know that i have no intentions of opening this container(even under nitrogen)as quite apart from the
obvious health risks i would not want to lose/ruin/destroy the contents. It is for this reason(and the fact that i don't have a clue what to do with
it) that i intend to sell/trade it along with about 50 or 60 other organic solvents/reagent that i have no use for,but have to buy in order to obtain
the inorganic stuff that i do want.
Once again thanks for the advice and as i've said before Great site.
|
|
arsen
Harmless
Posts: 16
Registered: 8-9-2009
Member Is Offline
Mood: No Mood
|
|
Hi,
I believe what you have in hand is SbF5, 50% on graphite support. Pure SbF5 itself is liquid at room temperature. Aldrich sells this and you can find
it in their catalogue.
They use graphite as support for better handling.
The worse thing that could happen to it if it's exposed to air is that SbF5 would get hydrolyzed to oxides and HF.
Otherwise, your sample should be fine, and I'd recommend not to do anything to it unless you need to use it.
Quote: Originally posted by itchyfruit ![](images/xpblue/lastpost.gif) | I was looking at a sealed container of SBF5 and it contained very light free flowing dark grey/black course powder(a bit like charcoal) thinking this
was strange looking stuff,i looked it up and it should be a liquid.
The container's label read Antimony pentafluoride 25g
Toxic Corrosive
moisture sensitive
store under nitrogen
It also said something like 50w/t %graphite.
So my question is why does Wiki and others say it is a liquid when the container states 25g (i do realise some liquids are sold in grams) but why is
it a solid or is it a gas on graphite or has it oxidised because it wasn't under nitrogen.
please help as i'm really confused |
|
|