User999
Harmless
Posts: 4
Registered: 7-2-2009
Member Is Offline
Mood: No Mood
|
|
Plastic Chemical compatibility chart?
I found this chart http://www.coleparmer.com/techinfo/ChemComp.asp
but it does not include HDPE. Any other databases out there?
|
|
|
Saerynide
National Hazard
Posts: 954
Registered: 17-11-2003
Location: The Void
Member Is Offline
Mood: Ionic
|
|
http://www.millerplastics.net/chemical_resistance_chart.html
www.camlab.co.uk/sitefiles/RTP_instructions/Plasticomp.pdf
Hope these help 
"Microsoft reserves the right at all times to monitor communications on the Service and disclose any information Microsoft deems necessary to...
satisfy any applicable law, regulation or legal process"
|
|
|
starman
Hazard to Others
Posts: 318
Registered: 5-7-2008
Location: Western Australia
Member Is Offline
Mood: No Mood
|
|
[img]URL=http://imageshack.us] [/URL][/img]
Out of one of my old catalogues.Hope it helps
|
|
|
chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
my partner downloaded some of these awhile back. One for protective gear like gloves is nice too since a chemist gets killed every once in awhile
from wearing the wrong kind of gloves
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
|
User999
Harmless
Posts: 4
Registered: 7-2-2009
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by starman
Out of one of my old catalogues.Hope it helps |
EXCELLENT!
Thanks, I see that HDPE and Oxidizers don't mix though. Bummer.
I bet those teflon containers are $s. :-)
[Edited on 2-12-2009 by User999]
|
|
|
Formatik
National Hazard
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
Some more chemical resistance charts:
General:
http://www.emersonprocess.com/RAIhome/documents/Liq_Handbook...
http://www.professionalplastics.com/professionalplastics/Che...
http://www.texloc.com/closet/cl_chemical_resist_chart2.html
http://www.flowline.com/chem.lasso (also 316 stainless steel, titanium)
http://www.catpumps.com/pdfs/chem_compatability_chart.pdf (versus metals, plastics, elastomers)
HDPE:
http://www.k-mac-plastics.net/data%20sheets/hdpe-chemical-re...
http://pt.rexnord.com/products/Guards/orange_peel_guards/hdp...
http://www.trolining.de/UserFiles/File/pdf/Chemical_resistan...
HDPE (tubes): http://www.alita.com/literature/HDPE-Porous-Tube.pdf
HDPE; LDPE:
http://www.calpaclab.com/pages/chart.html
http://www.borealisgroup.com/pdf/chemical-resistance/chemica...
HDPE; PP:
http://www.roechling-plastics.us/pdfs/gpbrochure.pdf
Glove chemical resistance chart:
http://www.tasco-safety.com/workgloves/chem.html
And this encyclopedia includes glass: (briefly, HF, F2 (moist), AlF3, NH4HF2, Ca(OH)2, NaOH, KOH, Na2S to 50%, are incompatible with glass, hot phosphoric acid also attacks glass).
[Edited on 20-2-2009 by Formatik]
|
|
|
Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
| Quote: | Originally posted by User999
| Quote: | Originally posted by starman
Out of one of my old catalogues.Hope it helps |
EXCELLENT!
Thanks, I see that HDPE and Oxidizers don't mix though. Bummer.
I bet those teflon containers are $s. :-)
[Edited on 2-12-2009 by User999] |
It would depend on the oxidiser, the storage conditions and the storage time. Remember always these charts are written for court to cover the
manufacturer, so they err on the side of caution, which is not a bad thing.
If you are not intending long term storage i would not hesitate using HDPE for oxidisers, i assume the warning is more due to incompatibility with one
of the myriad of processing additives used to make the hdpe blowable or melt-flowable or whatever.
I have a glass bottle of chlorine gas with a PP closure at STP, on my desk (to show people the colour). It has been there for about 4 years. The
colour in the closure has deteriorated but i have yet to have a whiff of chlorine.
If i haven't qualified myself enough, then just let me reiterate, it may be a disaster using HDPE instead of TFPE to store your oxidiser, but i highly
doubt it. If you use a simple PP (freezer bags) or PE(normal supermarket plastic bags) liner and just cable tie it closed within the HDPE container
you can sleep fairly easily. After all consider that the oxidisers commonly available at the hardware store use HDPE packaging throughout.
btw- thats an excellent compilation formatik especially the catpumps and flowline site
[Edited on 24-2-2009 by Panache]
|
|
|
franklyn
International Hazard
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
Yet another chart
Attachment: Chem resistence.pdf (19kB)
This file has been downloaded 634 times
Attachment: Glove materials.mht (60kB)
This file has been downloaded 896 times
.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
