| Pages:
1
2
3
..
9 |
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Chlorine
Dont say I am nuts, but I searched and found no thread dedicated to this useful compound.
Lets open the competition:
We want chlorine - dry - clean - and in serious amounts from all over the world freely available starting chemicals.
Extra bonus if no H2SO4 is needed for drying! And pleaze not the stoneold KmNO4/MnO2 recipes.....
New ways! Transmutation rulez! 
[Edited on 4-15-2004 by Polverone]
|
|
|
DDTea
National Hazard
Posts: 940
Registered: 25-2-2003
Location: Freedomland
Member Is Offline
Mood: Degenerate
|
|
Chlorine is easy and cheap to produce in the lab, but is not the easiest to dry without H2SO4. Normally, I would suggest NaCl + H2SO4 + KMnO4...but,
we're talking innovation now.
Of course, you could simply add NaOCl to HCl...that's the way I've always generated Chlorine (my KMnO4 is too precious for this).
Alternately, you could electrolyse HCl.
These would be the cheapest ways to actually produce Cl2, and any other way seems like it would be unnecessarily costly. Drying the gas is another
issue.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
In place of sodium hypochlorite I usually use calcium hypochlorite. Also I have made chlorine gas by the reaction of HCl(aq) with H2O2(aq). Too bad both of those methods produce chlorine contamainated with water. As
does the electrolysis of salt water. You could always do electrolysis of a molten chloride but the temperatures would be unacceptable most of the
time, on the plus side you really wouldn't have to worry about a water contaminate.
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
molten chloride
The Cl2 produced this way is told be rather impure - this states at least my old chem-engineering book.
I read about electrolysis of NaCl saturated with conc. HCl. Anybody tried this?
All electrolytic methods suffer from the electrode problem: Who can afford platinium electrodes or platimium coated titanium electrodes, I not.
Graphite/coal works, but for how long do the electrodes stand the chlorine attack and how does this attack contaminate the Cl2?
HCl and H2O2: Concentrations, temperatures? Pleaze...?
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
trichloroisocyanuric acid
Any way to kick the chloride (dry preferrred) from this OTC compound? This would be nice - isocyanuric acid is a very useful compound and if this
works one can get two goodies by one shot.....
(ok, the one goodie is a nastie goodie...)
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Deacon's reaction;
4 HCl+ O2 --> 2 Cl2 +2 H2O
Needs a hot catalyst IIRC.
|
|
|
Polverone
Now celebrating 21 years of madness
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
Cl2 from TCCA
Not dry, unfortunately! But I stumbled across a patent some time ago - GB 1401120 - that stated chlorine gas could be produced by mixing
trichloroisocyanuric acid with sodium chloride solution and then heating or simply reducing pressure over the solution. It would still need drying.
I mentioned in another thread that according to a journal article I read, dry Cl2 could be produced by heating dry calcium hypochlorite with cobalt
salts (or cobalt/iron salts) as a catalyst.
Anhydrous CuCl2 will release dry Cl2 when heated (probably not useful on a very large scale).
[Edited on 7-1-2004 by Polverone]
|
|
|
Pyrovus
Hazard to Others
Posts: 241
Registered: 13-10-2003
Location: Australia, now with 25% faster carrier pigeons
Member Is Offline
Mood: heretical
|
|
Not completely on topic, but the method of heating the copper (II) salt also works to produce fluorine. According to Reference Book of Inorganic
Chemistry (Wendell M Latimer, Joel H Hildebrand) "the cupric halides decompose according to the equation: 2 CuX2 -> 2CuX + X2. Cupric fluoride
decomposes around 500°C, and the chloride and bromide at somewhat lower temperatures." Unfortunately the book doesn't say what at rate this
reaction occurs, so it might not necessarily be terrible useful.
|
|
|
KABOOOM(pyrojustforfun)
Hazard to Others
Posts: 254
Registered: 12-10-2002
Location: Iran (pseudoislamic dictatorship of)
Member Is Offline
Mood: exuviating!
|
|
| Quote: |
Cupric fluoride decomposes around 500°C, and the chloride and bromide at somewhat lower temperatures
|
but I'm pretty sure CuCl<sub>2</sub> decomposes @ 993°C!
|
|
|
Theoretic
National Hazard
Posts: 776
Registered: 17-6-2003
Location: London, the Land of Sun, Summer and Snow
Member Is Offline
Mood: eating the souls of dust mites
|
|
Decomposition of nitrogen trichloride...
|
|
|
If_6_was_9
Unregistered
Posts: N/A
Registered: N/A
Member Is Offline
|
|
Bleaching powder is Ca(OCl)2. We had a big jar of Ca(OCl)2 that was used for swimming pools. That was over 20 years ago and I haven't seen any
Ca(OCl)2 in stores that sell pool supplies in the last 20 years. The pool "chlorine" sold now is usually trichlorotriazinetrione.
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
bleaching powder
MERCK:
Improperly called " chloride of lime" or "calcium oxychloride". A relatively unstable chlorine carrier in solid form; a complex
chemical compd of indefinite composition, presumably consisting of varying proportions of Ca(OCl)2 , CaCl2 , Ca(OH)2 and H2O in its molecular
structure. Maximum available chlorine content approaches 39%. Commercial products usually range between 24% and 37% of available chlorine.
Available at every better sorted drugstore where I live. 
|
|
|
Geomancer
Hazard to Others
Posts: 228
Registered: 21-12-2003
Member Is Offline
Mood: No Mood
|
|
IIRC, bleaching powder has other crap in it, too. The 'net seems to think calcium chloride. I have a big jug of stuff in my basement that claims
to be 68% hypochlorite. It's called "Shock It". I bought it a couple of years ago, but I think it should still be available in the US.
I suspect the impurities are the hydroxide and chloride, but I'm not sure. It generates chlorine well enough, though. The same company makes an
enhanced product with (I think) a 75% concentration.
|
|
|
Mumbles
Hazard to Others
Posts: 436
Registered: 12-3-2003
Location: US
Member Is Offline
Mood: Procrastinating
|
|
76% actually i believe. I've heard that the other 24%/32% was water in the hypochlorite's crystal structure. It wouldn't suprise me
if there was Calcium Chloride and Hydroxide in it though. I am assuming it is made the same way that NaOCl(caustic soda with Chlorine bubbled in).
I know for a fact it's still available in the US. I saw it at the hardware store no more than 3 hours ago. It's made by HTH.
"Shock-it" is the normal 68% and "Super Shock-it" is the enhanced one.
|
|
|
chloric1
International Hazard
Posts: 1147
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Hey Polverone
| Quote: | Originally posted by Polverone
I mentioned in another thread that according to a journal article I read, dry Cl2 could be produced by heating dry calcium hypochlorite with cobalt
salts (or cobalt/iron salts) as a catalyst.
[Edited on 1-4-2004 by Polverone] |
I have seen this before and I was wondering what conditions are necessary for the catalyst. Preparation,ratios, activation what type of substrate,
if any, was the catalyst deposited on. I have a small amount of cobalt sulfate and I could precipitate Co(OH)3 with hypochlorite then warm to 300C to
dry to oxide. Then I would soak in Ferric Nitrate with tarce nitric acid and roast it with a large propane torch. This would deposit ferric oxide on
cobalt oxide. I could also use both nitates on diatamaceous earth and perform the same roasting. Calcium hypochlorite can be bought for $10-$15 for
5 pounds in spring and summer and I could use this easy method. Also, if you could list the reference.
THanks
Fellow molecular manipulator
|
|
|
Polverone
Now celebrating 21 years of madness
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
It was a homogeneous catalyst. There was no special preparation that I recall. I originally read it in an English translation of The Journal of
Applied Chemistry of the USSR, and it was from an issue from the 1950s or early 1960s. Not very specific, I know! I shall try to locate the
article again.
[Edited on 1-25-2004 by Polverone]
PGP Key and corresponding e-mail address
|
|
|
kryss
Hazard to Self
Posts: 77
Registered: 11-7-2003
Location: N Ireland
Member Is Offline
Mood: No Mood
|
|
Cl2 from TCCA
the beauty of using di-chloro- isocyanurates is that they generate Chlorine in Situ, avoiding all the hassle you get with handling Chlorine gas.So eg
if its NCl3 your interested in making, you'd mix the DCI with a slightly ammonium salt, and hopefully get your product. IF you make up a
solution of it in water over days it'll start smelling of chloramine as it reacts with ammonia in the air so can see no reason why this wouldnt
work.
|
|
|
Theoretic
National Hazard
Posts: 776
Registered: 17-6-2003
Location: London, the Land of Sun, Summer and Snow
Member Is Offline
Mood: eating the souls of dust mites
|
|
There's no ammonia in air.
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
And TCCA is TRI-chloro-isocyanuric acid not DI-chloro btw.....
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
further adventures with chlorine
After doing some exoeriments with bleaching powder and HCl and H2SO4 for producing chlorine with very unsatisfying results btw. I changed to
electrolysis of HCl - with even more dissatisfaction.
-> Rolling Stones: I can get no....
F**k!
The chlorine was meant to be used for organic chlorinations (toluene...) and also for anorganic uses (Sn -> SnCl4 etc.).
Anyways, chlorine produced by the above named ways works lousy - or not at all.
Huh?
Thats exactly what I thought.
After exploiting the hypothesis that all chemistry is a fraud - there are many good reasons to believe this, I started over with research and found
out.....
.....found out that all above named ways produce chlorine admixed with oxygen/hydrogen. And at least in organic chlorinations already small amounts of
oxygen will fuck up the reaction. Also in inorganic chemistry the impurities seem to be at least "unfavorable".
My next try is to make chlorine from the electrolysis of zinc-chloride (actually my first idea - how funny...) which is told to produce chlorine free
from oxygen and hydrogen.
We will see.
And I will tell.
Remark: Also impure chlorine is not healthy at all! Cough, cough.......
|
|
|
Proteios
Hazard to Others
Posts: 109
Registered: 7-3-2004
Member Is Offline
Mood: No Mood
|
|
pah.... lightweights!
before i turned professional.... by far the most fearsome Cl generator i made was.....
1/4 fill a wine making bottle (demijorn) with FeSO4 (cheap, freely available (by the kg!) from garden centres), gurgle common domestic bleach onto
this (NaOCl soln). Cl comes off like the clappers. Get yourself a bung and some tubing, a little CaCl2 from drying and u got it made. Cl hardened
all the tubing i ever got hold of as a kid. As for how it works..... meh.... never really did figure it out.... but the Fe II goes from green 2
brown..... so there something else going on other than the acidity of the Fe.
basically this outclasses any other Cl gerenator i ever made is the sheer volume of Cl that can be made, the convenience, and the controlability.
Happy hunting!
[Edited on 14-4-2004 by Proteios]
[Edited on 14-4-2004 by Proteios]
|
|
|
t_Pyro
Hazard to Others
Posts: 120
Registered: 7-2-2004
Location: India
Member Is Offline
Mood: Volatile
|
|
Proteios: The reaction you stated most probably is a redox reaction between Fe<sup>2+</sup> ions and Cl atoms in the +1 oxidation state.
Fe<sup>2+</sup> is oxidised to Fe<sup>3+</sup>, and Cl<sup>+</sup> reduced to Cl.
2Cl->Cl<sub>2</sub>.
My choice of preparation of chlorine would be the electrolysis of concentrated NaCl solution, drying the Cl<sub>2</sub> by passing through
a drying tower packed with fused calcium chloride, and collect the gas by the downward displacement of oil, or some other non-reactive liquid. The
choice of oil would also be important: if it contains too many double bonds, you might end up chlorinating the oil. Maybe benzene could also be used
instead...
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
I choose the ZnCl2 electrolysis as it produces quite pure Zn which is useful for me in other reactions and - last not least - NaCl electrolysis
produces chlorine which is NOT free from oxygen/hydrogen. (after what I read on this subject).
The FeSO4 + bleach is nonsense.
The NaCl electrolysis would work but not for my purposes.
[Edited on 14-4-2004 by Organikum]
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Bleaching powder + water + FeSO4:
Doesnt even SMELL like chlorine.
The same bleaching powder + water + H2SO4 produced an instant strong chlorine stench, as did HCl.
Dear Proteios, only teenagers call others "lightweights" and speak like "before I went professional" - those real in the know dont
have to show off like this.
Have a nice day, be a little more careful in what you post in future - somebody might get hurt following your "tips".
|
|
|
Organikum
resurrected
Posts: 2339
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Ok. Retried it with liquid bleach and some chlorine stench was produced this time. (from FeSO4 and bleach) but no serious amounts. I guess this is the
most lousy way to produce impure chlorine known. There was no chlorine visibly evolved - ya know this green/yellow stuff.
Somehow I believe the iron might love to react with the chlorine - doesnt it?
|
|
|
| Pages:
1
2
3
..
9 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
